--- Log for 11.05.104 Server: zelazny.freenode.net Channel: #rockbox --- Nick: logbot Version: Dancer V4.16p1 Started: 4 hours and 20 minutes ago 00.00.10 # wuts goin on 00.00.44 # bitch slappin my thick brother for being incapable of grasping the concept of "you installed it on C:" 00.00.52 # lol 00.02.55 # u know of any good prices for a recorder v2 or an fm recorder 00.03.02 # nah :( 00.05.17 # why do you want a crappy v2? 00.05.40 # dislike digital, or prefer unchangable batteries? 00.05.54 # (sorry, just my cynical tone) 00.07.50 # cuz there smaller then the studios 00.08.35 # fair call 00.10.41 # wuts this bout digital n the battery 00.10.53 # no digital out 00.11.09 # battery will not charge if it drains too far 00.11.22 # i've nothing but bad stuff about the radio 00.11.49 # wut about the recorder v2 00.11.55 # same unit 00.12.07 # early v2s even had the fm chip on them 00.12.11 # the recorder v2 i know has digital out tho 00.12.15 # no 00.13.41 # there's a page on it on rockbox somewhere - but I can never find what I want on that page :( 00.15.31 # bLuecHip, G-UNIT: The recorder v2 as well as the fm units both have digital out, only that it is not wired to any socket. 00.15.45 # If you want to use it, you would have to mod the box. 00.16.04 # ahhaaaaaaaaaaa - well that's half good news :) 00.16.51 # why the hell wouldnt they wire it up 00.21.56 Quit AciD ("Segmentation fault (core dumped)") 00.22.48 # IIRC, you can only have 1 wired at a time 00.24.02 # ahhhh' 00.24.24 # n wuts the prob wit the battery 00.24.45 # its LiIon 00.24.50 # they drain too far and wont even power the recharger - few gone that way 00.25.07 # thats not accurate 00.25.18 # expensive & back-off replacement from afaik only one company (other than RTB archos customer "dis"service) 00.25.22 # that was a rockbox problem 00.25.42 # because we tried to spin up the disk before we started the charging screen 00.26.02 # shit! 00.26.15 # (expletive not denial) 00.26.17 # its been fixed since the new bootloader though 00.26.37 # i think it only effected flashed boxes to begin with 00.26.54 # if it affected NON-flashed boxes it CANNOT be a Rockbox problem 00.27.12 # did it though/ 00.27.24 # i dunno, maybe im remembering wrong 00.30.13 Nick bLuecHip is now known as BeSi|bbl (~bluechip@cpc3-colc1-3-0-cust61.colc.cable.ntl.com) 00.32.25 # why bootload rockbox instead of flashing it 00.42.23 Join midknight2k3 [0] (ZakkRobert@c-24-16-184-86.client.comcast.net) 00.43.02 Nick midknight2k3 is now known as midk (ZakkRobert@c-24-16-184-86.client.comcast.net) 00.44.57 # hey amiconn? 00.45.04 # yup 00.45.53 # i was thinking about it.. instead of either dropping the whole score idea or moving my drawing up one, could there be a gray_puts/putsxy function written? 00.47.19 # As wrote in the comment for my grayscale framework patch, writing a gray_puts(xy) function requires a change in the plugin api. 00.47.25 # * As I 00.47.38 Join LinusN [200] (~linus@labb.contactor.se) 00.47.42 # oh sorry didn;t see that 00.47.44 # hey linus 00.47.50 # amiconn: the player lcd driver works 00.48.03 # midk: The plugin would need to be able to get to the binary font data. 00.48.20 # LinusN: Fine, thanks for the test. 00.49.00 # midk: Btw, I've finally committed the latest version of the grayscale framework. 00.50.16 # midk: I just considered committing your latest clock update, but now I found a problem with it: 00.51.24 # When starting, it always tells me "old settings file". Then I adjust the options. When leaving and restarting -> "old settings file" and default settings again. 00.52.37 Quit matsl (Remote closed the connection) 00.55.57 # LinusN: did you come to a decision on that function? 00.56.43 # haven't thought about it yet, lots of other things on my mind 00.57.23 # okay 00.57.28 # one thing i wanted to point out 00.57.49 # the keys would have the sticky effect problem in rockbox + most plugins 00.58.13 # i think bluechip got a way around in othelo 01.01.10 Part LinusN 01.05.28 # you've scared him away now 01.05.35 # :( 01.05.36 # lol 01.05.40 # i hope not 01.06.58 # kinda hard to debug the execution of acsii strings as machine code ;/ 01.07.17 # (oops) :P 01.07.34 # orb d0,d0 01.07.50 Nick BeSi|bbl is now known as BeeSi (~bluechip@cpc3-colc1-3-0-cust61.colc.cable.ntl.com) 01.08.28 Nick BeeSi is now known as BeSi (~bluechip@cpc3-colc1-3-0-cust61.colc.cable.ntl.com) 01.08.36 # can't even spell my own name! 01.09.49 # LDW A14, @[A14 + 14] 01.09.54 # lol 01.10.04 # god that takes me back 01.10.11 # heh 01.10.27 # to last week when I was 21 01.10.28 # again 01.10.30 # lol 01.10.33 Join mecraw__ [0] (~mecraw@c-24-9-226-58.client.comcast.net) 01.11.11 # mk: if you have your own font, I have routines that could be adapted for greyscale puts 01.11.21 # ya... but this is TCC730 code, and i'll be 27 in 15 days 01.11.35 # ahh, but a kid still ;) 01.12.09 # heh... yes, yes... always a kid at heart 01.12.12 # BeSi, no thanks atm 01.12.16 # no custom font yet D: 01.12.32 # I'm quite chuffed with my latest font :) 01.13.07 # though i think my four year old would rather that i'd be a kid at play as well 01.14.04 # can i see, bee see? 01.14.18 # just finishing a new line alg 01.15.38 # this is such a brain fuck.... debugging an emulator running what i think is a correctly unencrypted and decompressed firmware image 01.15.56 # LOL 01.16.07 # i had to read that three times!! 01.16.21 # *twice 01.16.35 # ya... and poor me... actually having to do it! 01.16.57 # write a test program 01.17.07 # still fun though 01.18.22 Quit edouble (Read error: 60 (Operation timed out)) 01.18.26 # nah.... i just have to debug my implementation of the opcodes, it runs for several thousand steps 01.28.54 Join Nibbler [0] (nibbler@port-212-202-78-119.dynamic.qsc.de) 01.39.27 *** Saving seen data "./dancer.seen" 01.44.55 Part amiconn 01.57.41 # AHAHAHHAHAH 02.30.28 Nick arspy87 is now known as arsp|CHOREZ (~arspy87@h00062598fa3b.ne.client2.attbi.com) 02.31.03 Quit arsp|CHOREZ ("Leaving") 02.31.44 Join arspy87 [0] (~arspy87@h00062598fa3b.ne.client2.attbi.com) 02.32.25 Nick arspy87 is now known as arspy87|CHOREZ (~arspy87@h00062598fa3b.ne.client2.attbi.com) 02.32.26 Join adi|home [0] (~adi|home@as5300-11.216-194-24-170.nyc.ny.metconnect.net) 02.32.29 Nick arspy87|CHOREZ is now known as arsp|CHOREZ (~arspy87@h00062598fa3b.ne.client2.attbi.com) 02.54.39 Quit Nibbler (Read error: 104 (Connection reset by peer)) 03.07.59 Nick arsp|CHOREZ is now known as arspy87 (~arspy87@h00062598fa3b.ne.client2.attbi.com) 03.12.06 Join scott666_ [0] (~scott666@c-24-245-59-203.mn.client2.attbi.com) 03.25.59 Quit scott666 (Read error: 110 (Connection timed out)) 03.28.54 Quit scott666_ (Read error: 60 (Operation timed out)) 03.30.03 Join scott666_ [0] (~scott666@c-24-245-59-203.mn.client2.attbi.com) 03.39.29 *** Saving seen data "./dancer.seen" 03.43.15 Quit scott666_ ("i'll be back...eventually...") 03.58.05 Join scott666_ [0] (~scott666@c-24-245-59-203.mn.client2.attbi.com) 04.09.50 Part scott666_ 04.25.43 Quit TheDude2 (Read error: 54 (Connection reset by peer)) 04.35.24 Join Nibbler [0] (nibbler@port-212-202-78-119.dynamic.qsc.de) 04.46.16 # heh... realized why i kept trying to execute data.... the load address was wrong *smack* 04.46.31 # hhhhhhhaha 04.46.34 # your fault? 04.46.48 Quit arspy87 ("Leaving") 04.48.29 # *takes stone silence as "yes" 04.48.40 # well.... just when there are absolute addresses in the code... ya kinda have to use the right load address 04.48.58 # yes... hence the "*smack*" 04.49.56 # i had been getting the mnemonics written, and hadn't worried so much about the memory mapping. 05.00.22 Join brenwaterys [0] (~brenwater@dsl-spk-40.icehouse.net) 05.01.17 Part brenwaterys ("Leaving") 05.13.26 Join jkerman [0] (~jkerman@jkhouse2.jvlnet.com) 05.39.33 *** Saving seen data "./dancer.seen" 05.55.48 # bcbc 05.55.48 Quit Nibbler (Read error: 104 (Connection reset by peer)) 05.56.41 # hello 05.59.14 # I've just put a load of new goodies, including the new(er) Win32 Dev Kit & the source for my Starfield Mini Demo on my homepage ...http://homepage.ntlworld.com/cyborgsystems/Rockbox ...enjoy 05.59.48 # yaya 06.00.43 # wow nice! 06.01.53 # animation concept for othelo 06.02.03 # two flashes, then all pieces changed flip at once. 06.03.17 # and? 06.03.29 # and next turn 06.03.53 # yes, that's right 06.04.10 # i dont understand the question, sorry 06.04.25 # just an idea i mean 06.04.53 # should I be guessing that you just copied that from the othelo version history? 06.05.05 # no you said 2 flashes 06.05.08 # i built upon it 06.05.11 # with all flip at once 06.05.13 # didn't i? 06.05.25 # DAMMIT 06.05.28 # i thought i 06.05.29 # that is what is says in the version history 06.05.30 # it 06.05.32 # wtf 06.05.34 # it wasnt there a second ago 06.05.36 # i swear 06.05.39 # LMAO 06.05.53 # wtf 06.05.54 # did you just add it 06.05.54 # which version of the source are yuo reading? 06.06.03 # latest 06.06.05 # well its there 06.06.06 # but it wasnt 06.06.08 # or i didnt see it 06.06.09 # no dude - check the timestamp if you are in doubt 06.06.22 # it's 05:06 right now 06.06.24 # w t ffing f 06.06.34 # LOL 06.06.48 # buuuh 06.06.51 # noes 06.06.56 # My words are inside your head and you didn't even know - HOW good am I?? 06.07.02 # you're such a cheat bc 06.07.04 # MY IDEA 06.07.07 # idea stealer 06.07.20 # it was actually suggest some few days ago by D.Lichman 06.07.28 # NO 06.07.29 # I SUGGESTED IT 06.07.31 # just a few minutes ago 06.07.36 # it was my brilliance not his 06.07.43 # indeed - that makes three of us ;) 06.07.49 # no no 06.07.53 # you cant just steal ideas like that 06.07.56 # it doesn't work that way 06.08.45 # what's new in the starfield? 06.09.16 # if you had a flying through space mode the devs would jump ond it 06.09.18 # on it* 06.09.46 # beats the hell out them stamping on me - LOL 06.09.54 # LOL 06.10.04 # did i mention 06.10.11 # i meant i THINK they would jump on it. 06.10.38 # I doubt it - to be honest, I'm surprised Othelo was not removed 06.10.54 # ppl would protest 06.10.57 # i should protest 06.11.00 # STOP STAMPING ON BC 06.11.07 # mebbe 06.11.08 # LOL 06.11.11 # hmm good idea 06.11.27 # anyway - no permanent harm done 06.12.02 # ahemflythruspaceahem 06.12.06 # wtf was that noise 06.12.19 # *coughs 06.12.21 # mouse farting 06.12.22 # *a few times 06.12.37 # ah. yes. 06.12.40 # lol! 06.23.53 # time up - byeeeeeeeeeeeeeeeeee 06.23.55 Part BeSi 06.28.58 Quit midk ("Going... BYE!") 06.45.15 Quit adi|home (Client Quit) 06.45.57 Join Fedor [0] (~fedor@ncl.demon.nl) 06.49.55 Join adi|home [0] (~adi|home@as5300-9.216-194-23-47.nyc.ny.metconnect.net) 07.02.45 Join LinusN [200] (~linus@labb.contactor.se) 07.11.45 Join AciD [0] (~acid@longchamp44-1-82-67-133-87.fbx.proxad.net) 07.27.20 Join [IDC]Dragon [0] (~idc-drago@pD9512DE3.dip.t-dialin.net) 07.27.42 # <[IDC]Dragon> yo LinusN, already at work? 07.31.26 # yup 07.31.42 # <[IDC]Dragon> phew 07.32.42 # <[IDC]Dragon> I'd like to ask you if my change to mpeg.c is OK 07.32.54 # oh, yes 07.33.07 # <[IDC]Dragon> (somehow I don't feel comfortable making changes there) 07.33.10 # i haven't looked into it that deeply 07.33.39 # <[IDC]Dragon> I now alway reset the buffers on stop, that's it 07.34.08 # <[IDC]Dragon> (and let you carry on your work, must be urgent) 07.35.30 # you removed some stuff in init_recording(), any particular reason? 07.35.52 Quit Fedor (Read error: 60 (Operation timed out)) 07.35.54 # <[IDC]Dragon> because that's already done in the stop function 07.35.58 # ah, i see now 07.36.04 # good 07.36.23 # looks ok to me 07.36.29 # <[IDC]Dragon> :-) 07.37.07 # <[IDC]Dragon> I had a lengthy IRC discussion with Jens, we trying to understand it 07.37.27 # <[IDC]Dragon> (sunday morning) 07.38.53 Quit silencer (Remote closed the connection) 07.39.34 *** Saving seen data "./dancer.seen" 07.40.13 Join Nibbler [0] (nibbler@port-212-202-78-119.dynamic.qsc.de) 07.40.17 # <[IDC]Dragon> this spurious bitswap really drove me crazy, I was debugging this for like 2 days 07.40.36 # <[IDC]Dragon> (from what you can see what bad programmer I am) 07.41.19 Join silencer [0] (~silencer@nino.via.ecp.fr) 07.41.23 # or how lousy i am, since i wrote the bitswapping code :-) 07.41.41 # <[IDC]Dragon> I was always suspecting my code, and it behaved sooo erratic that I was disbelieving in causality 07.42.36 # so basically, the mp3 playback was stopped, but the bitswapping went on? 07.42.37 # <[IDC]Dragon> LinusN: not your fault, you didn't say we can use th mp3 buffer 07.43.16 # <[IDC]Dragon> yes, when it happened it always trashed my first 0x14000 bytes 07.43.28 # hehe 07.43.28 # <[IDC]Dragon> (dunno why) 07.52.06 # <[IDC]Dragon> thanks for your precious time, bye! 07.52.10 Quit [IDC]Dragon () 09.04.36 Join amiconn [0] (~jens@pD9E7E996.dip.t-dialin.net) 09.22.36 Part amiconn 09.31.18 Join Fedor [0] (~fedor@gw2.hosting.facingfacts.nl) 09.35.52 Join amiconn [0] (~jens@pD9E7E996.dip.t-dialin.net) 09.37.06 # LinusN: respect man! 09.39.35 *** Saving seen data "./dancer.seen" 09.49.08 # hola 09.51.00 # LinusN: i thought u r swedish ;) not spanish ;) 09.57.44 # ok, "hejsan" then 09.58.17 # LinusN: ;) i know only flicka ;) 10.13.05 Quit silencer ("leaving") 10.13.10 Join silencer [0] (~silencer@nino.via.ecp.fr) 10.31.56 Join limbus [0] (~manuel@kernel.cycos.net) 11.09.53 Quit Nibbler (Read error: 54 (Connection reset by peer)) 11.19.55 Quit amiconn (zelazny.freenode.net irc.freenode.net) 11.19.55 NSplit zelazny.freenode.net irc.freenode.net 11.19.55 Quit Fedor (zelazny.freenode.net irc.freenode.net) 11.24.19 NHeal zelazny.freenode.net irc.freenode.net 11.24.19 NJoin amiconn [0] (~jens@pD9E7E996.dip.t-dialin.net) 11.24.19 NJoin Fedor [0] (~fedor@gw2.hosting.facingfacts.nl) 11.39.36 *** Saving seen data "./dancer.seen" 11.59.18 Join MeeBit [0] (MeeBit@64-40-51-239.ncplus.net) 11.59.27 Part MeeBit 12.32.02 Join Nibbler [0] (nibbler@port-212-202-78-119.dynamic.qsc.de) 13.08.55 # have you got your ears on linus ? 13.08.55 Quit Nibbler (Read error: 54 (Connection reset by peer)) 13.15.53 # c0utta: sort of 13.16.19 # i've done the f3 "hardcoded" work 13.16.33 # ah, nice 13.16.58 # i also need some advice about some of the on+play code 13.18.18 # there are many options with playlist, especially with queue (yes/no) and insert 13.19.25 # do you think that i should write individual functions for each option ? or allow them to be configured from the file ? 13.19.51 # the file? 13.20.12 # sorry, the kayepad mapping file that i read 13.20.21 # s/kayepad/keypad 13.20.32 # but i thought f3 was to be hardcoded? 13.20.55 # * LinusN tries to remember earlier conversations 13.21.00 # ok, assume it's hardcoded 13.22.13 # look in onplay.c, function playlist_options 13.24.29 # i see it, now what is your question? 13.25.04 # the position and queue parameters mean that there are 6 combinations, correct ? 13.29.02 # yes 13.29.40 # do you suggest create 6 different actions, or creating one action (called action_playlist_insert) and using parameters ? 13.30.04 # don't forget that this may be pulled from the file (although it's hardcoded at the moment) 13.33.12 # hmmm, i think you should whichever is simplest 13.33.21 # "should do" 13.34.00 # 6 actions mean more modularity, so i'd like to do that 13.36.37 # also, how do i do a "cvs update -dP" now that we're not using sourceforge ? 13.38.22 # you need to check out again 13.38.32 # or change each CVS/Root file 13.39.07 # change each CVS/Root file ? manually ? 13.39.23 # change the host name in the Root file from cvs.sourceforge.net to rockbox.haxx.se 13.39.39 *** Saving seen data "./dancer.seen" 13.39.41 # thanks 13.39.46 # that, or check out again 13.40.11 # checking out will overwrite my work tho 13.40.21 # won't it ? 13.40.23 # yup 13.40.56 # i'll change each CVS/Root file then 13.40.58 # you can create a patch file and apply it to the newly checked out repository 13.41.32 # but i need to create a patch against rockbox.haxx.se ? 13.41.42 # not necessarily 13.41.57 # there haven't been that many changes since we moved 13.42.20 Quit adi|home (Client Quit) 13.42.23 # still, changing the root files is probably the simplest approach 13.43.14 # thx linus - you busy at work huh ? 14.01.54 DEBUG EOF from server (No route to host) 14.01.54 *** Cleanup 14.01.54 *** Connected to irc.eu.freenode.net on port 6667 14.01.54 *** Logfile for #rockbox started 14.01.54 *** Server message 501: 'logbot_ :Unknown MODE flag' 14.01.54 Mode "logbot_ :+i" by logbot_ 14.01.55 Join logbot_ [242] (~bjst@labb.contactor.se) 14.01.55 Join Fedor [0] (~fedor@gw2.hosting.facingfacts.nl) 14.01.55 Join amiconn [0] (~jens@pD9E7E996.dip.t-dialin.net) 14.01.55 Join limbus [0] (~manuel@kernel.cycos.net) 14.01.55 Join silencer [0] (~silencer@nino.via.ecp.fr) 14.01.55 Join AciD [0] (~acid@longchamp44-1-82-67-133-87.fbx.proxad.net) 14.01.55 Join LinusN [200] (~linus@labb.contactor.se) 14.01.55 Join jkerman [0] (~jkerman@jkhouse2.jvlnet.com) 14.01.55 Join mecraw__ [0] (~mecraw@c-24-9-226-58.client.comcast.net) 14.01.55 Join G-UNIT [0] (~a@Ottawa-HSE-ppp258410.sympatico.ca) 14.01.55 Join Strath [0] (aopen@dgvlwinas01pool0-a198.wi.tds.net) 14.01.55 Join logbot [242] (~bjst@labb.contactor.se) 14.01.55 Join Ka_ [0] (~tkirk@pcp261013pcs.howard01.md.comcast.net) 14.01.55 Join c0utta [0] (~c0utta@125.cust38.nsw.dsl.ozemail.com.au) 14.01.55 Join dwihno [0] (~dw@81.8.224.89) 14.01.55 Join Ka__ [0] (~tkirk@65.216.194.2) 14.01.55 Join Hadaka [0] (naked@naked.iki.fi) 14.01.55 Join mbr [0] (~mb@stz-softwaretechnik.com) 14.01.55 Join webmind [0] (~cme2@217-195-236-172.dsl.esined.net) 14.01.55 Join ze [20] (psyco@adsl-67-123-40-187.dsl.lsan03.pacbell.net) 14.01.55 Join CompBrain [0] (pcislot1@pcp01270874pcs.kilng01.ct.comcast.net) 14.09.35 Quit LinusN (Read error: 104 (Connection reset by peer)) 14.09.45 Quit logbot (Read error: 104 (Connection reset by peer)) 14.11.00 Join LinusN [200] (~linus@labb.contactor.se) 14.11.02 Join [IDC]Dragon [0] (~idc-drago@pD9512DE3.dip.t-dialin.net) 14.11.09 # hi Jörg 14.11.15 # <[IDC]Dragon> Hi again 14.11.42 # <[IDC]Dragon> gcc does not inline functions like instructed, Is there a way to force it? 14.12.23 # machine code by hand? :) 14.16.01 # [IDC]Dragon: What do you want to do? Did you have a look at how this is done for set_irq_level()? 14.17.33 # <[IDC]Dragon> it's static inline there, let's see if that helps... 14.18.15 # <[IDC]Dragon> ahh, yes! 14.25.47 # Btw: My latest grayscale framework (finally committed) contains an alignment fix now, thanks for your bug report. 14.26.31 # <[IDC]Dragon> I've seen that, thanks. 14.26.50 # <[IDC]Dragon> have to merge with my JPEG decoder 14.28.38 # <[IDC]Dragon> is there a way to find out how much memory gray_init_buffer() took? 14.30.53 # No, (not yet). The return value of gray_init_buffer() is the number of bitplanes it could fit into the buffer, the maximum being the requested number (<=32). 14.31.42 # Perhaps I could return that in the buffer size variable. That would require to hand it over as a pointer, though. 14.32.12 # <[IDC]Dragon> good idea 14.32.37 # <[IDC]Dragon> update it with the remaining buffer size 14.33.29 # Hmm. Updating it with the remaining size would imo also require to advance the buffer pointer to the start of the remaining area. 14.34.17 # That would require it to be a pointer to a pointer, not very straightforward to use. 14.34.19 # <[IDC]Dragon> hmm, that's another way 14.34.50 # My first thought was to return the size that was actually taken by the grayscale buffer. 14.35.13 # <[IDC]Dragon> ok, however 14.35.33 # <[IDC]Dragon> I just like to place my variable size stuff behind it 14.35.42 # <[IDC]Dragon> so I need to know where it ends 14.37.45 # You wil be always on the safe side if you place your stuff at (gbuf + gbuf_size) since it is guaranteed that grayscale never takes more space than gbuf_size. 14.38.14 # *will 14.41.35 # <[IDC]Dragon> sure, but that's a value I supply 14.45.36 # Yes, and you can supply a value that is barely enough to fit the desired grayscale buffer. The formula for calculating this is given in the framework. 14.46.46 # <[IDC]Dragon> just copying that already... 14.46.55 Quit AciD (Read error: 54 (Connection reset by peer)) 14.47.20 Join NibbIer [0] (nibbler@port-212-202-78-119.dynamic.qsc.de) 14.49.46 # [IDC]Dragon: Perhaps I will modify this to return the number of bytes occupied. 14.50.16 # I will change gray_drawbitmap() as well to use the same bitmap format as lcd_bitmap(), so one can use bmp2rb for it as well. 14.51.27 # Next thing is to integrate font support. This will require an api change though. 14.51.36 # LinusN, are you listening? 14.54.43 # <[IDC]Dragon> tGraymap is tGraybuf now, I guess? 14.56.33 # amiconn: i'm here now 14.57.09 # [IDC]Dragon: Yes, for quite a while, since it is not really a map, but a buffer. 14.58.08 # LinusN: A question - who is responsible for sorting plugin api functions? 14.58.47 # There is a comment stating that this should be done when breaking compatibility next time. 14.59.10 # nobody is responsible 14.59.15 # The api version number was incremented recently, but no sorting took place... 14.59.43 # Am I correct that incrementing the version number breaks compatibility? 14.59.44 # the next person who makes an incompatible change to the API gets to sort the functions 15.00.29 # well, you increment the version number when you make an incompatible change 15.00.29 # <[IDC]Dragon> yes, that's overdue. 15.00.42 # <[IDC]Dragon> (I didn't dare to break it) 15.01.26 # <[IDC]Dragon> but made a big fat comment that this has to be done if bumping PLUGIN_MIN_API_VERSION 15.01.32 # [IDC]Dragon: Didn't you inrement the api version number? 15.01.45 # <[IDC]Dragon> yes, PLUGIN_API_VERSION 15.01.54 # Ah ok 15.01.56 # <[IDC]Dragon> you have to doso if adding stuff 15.02.48 # <[IDC]Dragon> but when breaking I'd like to remave a few 15.02.54 # <[IDC]Dragon> remove 15.10.16 Join Ralle[DK] [0] (~Ralle@129.142.195.95) 15.10.21 # hey 15.10.36 # hey cowboys 15.12.53 # hi 15.13.28 # hey 15.13.29 # yeh 15.13.30 # hey 15.13.32 Quit Ralle[DK] (Client Quit) 15.15.43 # bye 15.15.44 # :) 15.20.20 # hoi 15.26.12 Quit mecraw__ ("Trillian (http://www.ceruleanstudios.com)") 15.39.41 *** Saving seen data "./dancer.seen" 15.40.03 Join elinenbe [0] (trilluser@207-237-224-177.c3-0.nyr-ubr1.nyr.ny.cable.rcn.com) 15.48.36 Part LinusN 16.23.18 DEBUG Lost contact with server 16.23.18 *** Cleanup 16.23.18 *** Cleanup 16.23.18 *** Saving seen data "./dancer.seen" 16.23.18 *** Exit 16.23.23 *** Started Dancer V4.16p1 16.23.23 DEBUG gethostbyname(2) failed for irc.eu.openprojects.net (No such file or directory) 16.23.23 DEBUG gethostbyname(2) failed for irc.eu.openprojects.net (No such file or directory) 16.23.23 DEBUG gethostbyname(2) failed for irc.eu.openprojects.net (No such file or directory) 16.23.23 DEBUG gethostbyname(2) failed for irc.eu.openprojects.net (No such file or directory) 16.23.23 DEBUG gethostbyname(2) failed for irc.eu.openprojects.net (No such file or directory) 16.23.23 DEBUG gethostbyname(2) failed for irc.eu.openprojects.net (No such file or directory) 16.23.23 DEBUG gethostbyname(2) failed for irc.eu.openprojects.net (No such file or directory) 16.23.23 DEBUG gethostbyname(2) failed for irc.eu.openprojects.net (No such file or directory) 16.23.23 *** Unable to connect to irc.eu.openprojects.net on port 6667 (tried 8 times) 16.23.23 *** Cleanup 16.23.23 *** Connected to irc.freenode.net on port 6667 16.23.23 *** Logfile for #rockbox started 16.23.53 *** Server message 501: 'logbot :Unknown MODE flag' 16.23.53 Mode "logbot :+i" by logbot 16.23.54 Join logbot [242] (~bjst@labb.contactor.se) 16.23.54 Join Bagder [241] (~dast@labb.contactor.se) 16.23.54 Join elinenbe [0] (trilluser@207-237-224-177.c3-0.nyr-ubr1.nyr.ny.cable.rcn.com) 16.23.54 Join NibbIer [0] (nibbler@port-212-202-78-119.dynamic.qsc.de) 16.23.54 Join [IDC]Dragon [0] (~idc-drago@pD9512DE3.dip.t-dialin.net) 16.23.54 Join Fedor [0] (~fedor@gw2.hosting.facingfacts.nl) 16.23.54 Join amiconn [0] (~jens@pD9E7E996.dip.t-dialin.net) 16.23.54 Join limbus [0] (~manuel@kernel.cycos.net) 16.23.54 Join silencer [0] (~silencer@nino.via.ecp.fr) 16.23.54 Join jkerman [0] (~jkerman@jkhouse2.jvlnet.com) 16.23.54 Join G-UNIT [0] (~a@Ottawa-HSE-ppp258410.sympatico.ca) 16.23.54 Join Strath [0] (aopen@dgvlwinas01pool0-a198.wi.tds.net) 16.23.54 Join Ka_ [0] (~tkirk@pcp261013pcs.howard01.md.comcast.net) 16.23.54 Join c0utta [0] (~c0utta@125.cust38.nsw.dsl.ozemail.com.au) 16.23.54 Join mbr [0] (~mb@stz-softwaretechnik.com) 16.23.54 Join webmind [0] (~cme2@217-195-236-172.dsl.esined.net) 16.23.54 Join ze [20] (psyco@adsl-67-123-40-187.dsl.lsan03.pacbell.net) 16.23.54 Join CompBrain [0] (pcislot1@pcp01270874pcs.kilng01.ct.comcast.net) 16.23.54 Join Hadaka [0] (naked@naked.iki.fi) 16.23.54 Join Ka__ [0] (~tkirk@65.216.194.2) 16.23.54 Join dwihno [0] (~dw@81.8.224.89) 16.31.12 Join mecraw__ [0] (~mecraw@69.2.235.2) 16.47.06 Join AciD [0] (~acid@longchamp44-1-82-67-133-87.fbx.proxad.net) 17.28.39 Part Bagder 17.46.14 Quit AciD (Read error: 54 (Connection reset by peer)) 17.52.31 Quit Fedor (Read error: 60 (Operation timed out)) 17.58.58 Quit [IDC]Dragon () 18.01.26 Join Guest1 [0] (~jirc@fw.macrovision.com) 18.02.18 Quit Guest1 (Client Quit) 18.16.30 Quit Strath ("ChatZilla 0.9.61 [Mozilla rv:1.7b/20040316]") 18.23.25 *** Saving seen data "./dancer.seen" 18.42.22 Quit mecraw__ ("Trillian (http://www.ceruleanstudios.com)") 18.42.22 Quit NibbIer (Read error: 54 (Connection reset by peer)) 19.08.07 Join mattzz [0] (~mattzz@62.109.107.214) 19.24.46 Join mecraw__ [0] (~mecraw@69.2.235.2) 19.39.06 Quit limbus () 19.40.38 Join cjnr11 [0] (dfd@bobillot-5-82-224-193-23.fbx.proxad.net) 19.40.43 Part cjnr11 19.45.23 Join AciD [0] (~acid@longchamp44-1-82-67-133-87.fbx.proxad.net) 20.16.36 Join Nibbler [0] (nibbler@port-212-202-78-119.dynamic.qsc.de) 20.23.29 *** Saving seen data "./dancer.seen" 20.27.53 Quit AciD (Connection reset by peer) 20.34.21 Join BeSi [0] (~bluechip@213.107.250.61) 20.38.08 Join Kevin_S [0] (Kevin_S@193.41.249.144) 20.38.34 # hello ppl 20.40.19 # anybody here /> 20.40.20 # ? 20.48.55 Join AciD [0] (~acid@longchamp44-1-82-67-133-87.fbx.proxad.net) 20.49.09 # nope 21.04.52 # wassup? 21.09.13 Quit mattzz ("Client exiting") 21.12.50 # o 21.12.52 # webmind 21.13.47 # Kevin_S, ? 21.15.40 Join Hacman [0] (~jirc@82-39-50-33.cable.ubr03.benw.blueyonder.co.uk) 21.15.45 # hello? 21.15.50 Join Rjc1286_ [0] (Joosa@ool-44c4728b.dyn.optonline.net) 21.15.53 # is there anyone here? 21.16.19 # hey, can someone help me with cygwin 21.16.55 # Hello all - i own a jukebox recorder 20 V2 (modified FM version) and need a copy of the pinouts for the USB port - any ideas? 21.17.32 # ? 21.17.43 # standard usb port 21.18.24 # yea, but i need to know which ones are used to charge the battery from the usb port, and what voltage they use, as my charger is bust 21.19.01 Quit Hacman (Client Quit) 21.19.11 Join Hacman [0] (~jirc@82-39-50-33.cable.ubr03.benw.blueyonder.co.uk) 21.19.15 Part Rjc1286_ 21.19.23 # so anyone got any ideas? 21.20.25 # has anyone got any ideas regarding the pinouts of the jukebox recorder v2? 21.20.45 DBUG Enqueued KICK Hacman 21.20.45 # 8? 21.21.33 # any ideas? 21.22.15 Quit Hacman (Client Quit) 21.38.16 Join Rjc1286_ [0] (Joosa@ool-44c4728b.dyn.optonline.net) 21.38.24 Part Rjc1286_ 21.39.01 Join george_4_man [0] (Joosa@ool-44c4728b.dyn.optonline.net) 21.39.25 # is there anyone who can assist me with cygwin? 21.41.20 # im busy, but maybe 21.42.02 # i'm trying to compile, but it says i don't have sh-elf-gcc 21.42.05 # where can i get that? 21.47.41 Join jakesir [0] (solaris@pool-141-157-101-228.balt.east.verizon.net) 21.49.30 Part george_4_man 21.51.57 Join mattzz [0] (~mattzz@b107214.adsl.hansenet.de) 22.11.29 Join amiconn_ [0] (~jens@pD9E7ED1D.dip.t-dialin.net) 22.17.33 Quit amiconn (Read error: 60 (Operation timed out)) 22.17.33 Nick amiconn_ is now known as amiconn (~jens@pD9E7ED1D.dip.t-dialin.net) 22.18.20 Join mike18 [0] (mike@CPE-24-208-87-216.neb.rr.com) 22.19.55 # ok im making playlists 22.19.59 # and when i load them in rockbox 22.20.05 # it just says "end of song file" 22.20.22 # ? 22.23.33 *** Saving seen data "./dancer.seen" 22.36.15 Join Bagder [0] (~daniel@c25025a.hud.bostream.se) 22.45.15 Quit Kevin_S () 23.15.52 Quit mattzz ("Client exiting") 23.16.43 # anyone know where i can get uart_boot program to read and write the flash?? 23.21.23 # ask Jörg ;-) 23.22.52 # he ain't here 23.22.55 # thx 23.24.14 # right, but he's the main flashing magician 23.26.49 # that i know, he told me to build me level converter and do serial modification on my v2, I'm all done with my homework and ready to rock, again 23.27.33 # i'm gonna leave message for him 23.28.32 # this link doesn't work http://joerg.hohensohn.bei.t-online.de/archos/flash/flash_sourcecode.zip 23.44.57 Join friday101 [0] (~why@pcp06796835pcs.bowie01.md.comcast.net) 23.45.55 # anybody here an actual programmer for rockbox? 23.46.34 # yes 23.47.22 # Hey Mr B ...is the typo deliberate?? ....LOL 23.47.55 Nick BeSi is now known as bluEchiP (~bluechip@213.107.250.61) 23.51.33 Join arspy87 [0] (~arspy87@h00062598fa3b.ne.client2.attbi.com) 23.54.12 Quit Bagder ("Leaving")