--- Log for 10.04.112 Server: gibson.freenode.net Channel: #rockbox --- Nick: logbot_ Version: Dancer V4.16 Started: 8 days and 22 hours ago 00.03.37 # ban SypeJeossy spam 00.27.19 Quit bertrik (Quit: And That, My Liege, Is How We Know the Earth to Be Banana Shaped) 00.35.01 Join Thra11 [0] (~thrall@87.113.210.55) 00.49.44 Quit ender` (Quit: The best way to accelerate a Macintosh is at 9.8m/sec²) 01.05.25 Quit Thra11 (Quit: kthxbai) 01.11.36 # <[Saint]> gevaerts: Right, thanks. It was indeed the c200 I was thinking about wrt RAM, for some reason I had Fuze stuck in my head that day. 01.11.45 # <[Saint]> I wasn't around any of my targets to check. 01.15.48 Quit pamaury (Remote host closed the connection) 01.16.53 *** Saving seen data "./dancer.seen" 02.41.02 Quit dfkt (Quit: -= SysReset 2.55=- Sic gorgiamus allos subjectatos nunc.) 02.52.17 Quit RansomTime (Ping timeout: 264 seconds) 02.57.47 Nick namnuf is now known as funman (~fun@rockbox/developer/funman) 03.00.38 Part joecool ("Leaving") 03.14.11 Join XavierGr [0] (~xavier@rockbox/staff/XavierGr) 03.16.54 *** Saving seen data "./dancer.seen" 03.32.24 Join RansomTime [0] (~RT@wikia/vstf/Randomtime) 03.39.00 Quit MethoS- (Ping timeout: 252 seconds) 03.40.05 Quit RansomTime (Ping timeout: 265 seconds) 03.41.47 Nick enthdegree is now known as ___ENTHDEGREE___ (~BitchX@unaffiliated/enthdegree) 04.13.07 Join [Saint_] [0] (~Saint]@unaffiliated/saint/x-8516940) 04.20.29 Quit XavierGr (Ping timeout: 265 seconds) 04.35.36 Quit TheSeven (Disconnected by services) 04.35.46 Join [7] [0] (~quassel@rockbox/developer/TheSeven) 04.35.47 Quit [Saint_] (Remote host closed the connection) 04.43.06 Join amiconn_ [0] (amiconn@rockbox/developer/amiconn) 04.43.06 Quit amiconn (Disconnected by services) 04.43.23 Nick amiconn_ is now known as amiconn (amiconn@rockbox/developer/amiconn) 04.43.56 Quit pixelma (Disconnected by services) 04.43.58 Join pixelma_ [0] (pixelma@rockbox/staff/pixelma) 04.44.00 Nick pixelma_ is now known as pixelma (pixelma@rockbox/staff/pixelma) 05.16.57 *** Saving seen data "./dancer.seen" 05.35.22 Quit perrikwp (Read error: Connection reset by peer) 06.22.20 Join anewuser_ [0] (~anewuser@186.93.174.140) 06.25.11 Quit anewuser (Ping timeout: 265 seconds) 06.26.38 Quit ___ENTHDEGREE___ (Ping timeout: 265 seconds) 06.29.27 Join nosa [0] (~m00k@adsl-74-235-42-90.clt.bellsouth.net) 06.30.25 Join perrikwp [0] (~quassel@cpe-024-163-024-033.triad.res.rr.com) 06.33.35 Quit nosa-j (Ping timeout: 246 seconds) 06.33.35 Nick nosa is now known as nosa-j (~m00k@adsl-74-235-42-90.clt.bellsouth.net) 06.35.22 Quit anewuser_ () 06.40.24 Join bitcraft [0] (~bitcraft@173-20-20-92.client.mchsi.com) 06.43.04 Join Zambezi_ [0] (Zulu@bnc.fran.dotbnc.se) 06.43.11 Quit Zambezi (Read error: Connection reset by peer) 06.50.28 Quit Rower85 (Quit: Hmmm...) 06.55.08 Quit Elfish (Ping timeout: 245 seconds) 06.57.45 Join Elfish [0] (amba@2a01:4f8:100:90a1:abc:abc:abc:abc) 07.06.32 Quit bitcraft (Remote host closed the connection) 07.07.07 Join bitcraft [0] (~bitcraft@173-20-20-92.client.mchsi.com) 07.09.15 Quit bitcraft (Remote host closed the connection) 07.17.01 *** Saving seen data "./dancer.seen" 07.49.29 Join stoffel [0] (~quassel@pD9E4340C.dip.t-dialin.net) 07.57.14 Quit stoffel (Remote host closed the connection) 07.58.09 Join bitcraft [0] (~bitcraft@173-20-20-92.client.mchsi.com) 08.17.31 Join liar [0] (~liar@clnet-p09-185.ikbnet.co.at) 08.51.50 Join ender` [0] (~ender@foo.eternallybored.org) 08.58.26 Join wodz [0] (~wodz@89-76-160-35.dynamic.chello.pl) 08.58.50 Quit mc2739 (Ping timeout: 246 seconds) 09.01.59 Quit tchan (Ping timeout: 246 seconds) 09.14.03 Quit liar (Read error: Connection timed out) 09.17.03 *** Saving seen data "./dancer.seen" 09.20.08 Quit Unhelpful (Remote host closed the connection) 09.24.16 Join Unhelpful [0] (~quassel@rockbox/developer/Unhelpful) 09.31.53 Join tchan [0] (~tchan@lunar-linux/developer/tchan) 09.36.07 Quit bitcraft (Remote host closed the connection) 09.37.43 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 09.39.45 Join bitcraft [0] (~bitcraft@173-20-20-92.client.mchsi.com) 09.41.06 Join LinusN [0] (~linus@giant.haxx.se) 09.43.20 Join mortalis [0] (~mortalis@77.108.98.177) 09.43.26 # mortalis: ping 09.43.30 # wodz: pong 09.43.44 # mortalis: with your latest patch I get all white screen 09.45.54 # http://www.pastie.org/3760494 09.46.13 # mortalis:^ 09.46.59 # moreover this will need mutex for sure 09.47.14 # wodz: you still use data transform& 09.47.17 # ? 09.49.17 Join pystar90 [0] (~pystar90@frnk-4d00838d.pool.mediaWays.net) 09.49.30 # mortalis: no why? 09.50.04 # wodz: I see it in lcd_data and lcd_cmd 09.51.23 # mortalis: right but this are used only to setup controller in bypass mode, after switch to buffered writes this are not used 09.53.55 # wodz: hm, in 16bit mode my display doesn't work untill I'm not removed it 09.54.48 # ok, I'll look at this later, work is calling 09.54.51 Quit wodz (Quit: Leaving) 10.00.01 Join RansomTime [0] (~RT@wikia/vstf/Randomtime) 10.10.14 # Commit d3ead23 in rockbox by 03Thomas Martitz: touchscreen: fix some issues/crashes with clicking the list title. 10.13.49 # d3ead23 build result: All green 10.17.38 Quit mc2739 (Ping timeout: 245 seconds) 10.17.51 # FS#12640 seems pretty major 10.17.52 # http://www.rockbox.org/tracker/task/12640 3Olympus Mrobe MR-100 no button functions (bugs, unconfirmed) 10.21.34 Join jm [0] (jm@epicsol.org) 10.25.37 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 10.30.53 Join wodz [0] (~wodz@iwl138.internetdsl.tpnet.pl) 10.35.23 # Commit a5b0a1d in rockbox by 03Thomas Martitz: Call radio_init() from hosted's init() too. 10.36.18 Join pamaury [0] (~quassel@vit94-1-82-67-248-70.fbx.proxad.net) 10.36.18 Quit pamaury (Changing host) 10.36.18 Join pamaury [0] (~quassel@rockbox/developer/pamaury) 10.37.55 # a5b0a1d build result: All green 10.38.18 # Commit 2406005 in rockbox by 03Thomas Martitz: Remove a useless sleep() from hosted's init(). 10.40.42 # 2406005 build result: 0 errors, 3 warnings (Thomas Martitz committed) 10.42.31 Quit bitcraft (Remote host closed the connection) 10.42.47 Join dfkt [0] (dfkt@chello084112032026.1.11.vie.surfer.at) 10.43.00 Quit dfkt (Changing host) 10.43.00 Join dfkt [0] (dfkt@unaffiliated/dfkt) 10.44.50 # * [Saint] wonders how kugel seems to keep finding touchscreen bugs that he can never reproduce. 10.46.11 # <[Saint]> there's two in particular, the apparent "issue with scroll bar on the left" (I've actually seen at least one other person report this, but I can't reproduce on any of my devices), and the one you just fixed (you mentioned it a while ago and I couldn't reproduce that either). 10.46.46 Join Thra11 [0] (~thrall@46.114.113.87.dyn.plus.net) 10.47.20 Quit qnm (Read error: Operation timed out) 10.47.55 Join qnm [0] (~qnm@2001:44b8:3110:f300:208:9bff:fec0:179a) 10.49.32 # [Saint]: the first one required the scrollbar to be on the left and top (thus, statusbar off or at the bottom). the kinetic scrolling code inserted a "virtual touch" at 0,0. if the scrollbar was at this position it would scroll up 10.49.49 # the second one was a regression introduced with my latest rewrite 10.50.32 # <[Saint]> Yeah, you've explained the scrollbar thing to me, I could still never reproduce it though. 10.50.43 # <[Saint]> My theme seems to be immune to it or something. 10.50.53 Quit mc2739 (Ping timeout: 260 seconds) 10.51.57 # it has a ui viewport, the scrollbar isn't at 0,0 10.57.48 Join mc2739 [0] (~mc2739@71.20.87.137) 10.58.00 Quit mc2739 (Changing host) 10.58.00 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 11.07.55 # <[Saint]> Aha! 11.08.02 # <[Saint]> Right....thanks for clearing that up. 11.08.49 # <[Saint]> When you explained it previously, I had thought the positioning applied to the UI viewport and wasn't screen relative. 11.13.14 Join MethoS- [0] (~clemens@134.102.106.250) 11.17.06 *** Saving seen data "./dancer.seen" 11.18.05 Quit user890104 (Ping timeout: 272 seconds) 11.22.21 Join user890104 [0] (venci@Addicted.to.Minecraft.ipv6.6bez10.info) 11.38.47 Join anewuser [0] (~anewuser@186.93.174.140) 11.38.47 Quit anewuser (Changing host) 11.38.47 Join anewuser [0] (~anewuser@unaffiliated/anewuser) 11.41.50 Join evilnick [0] (d92ba8fc@rockbox/staff/evilnick) 11.54.16 Quit mc2739 (Ping timeout: 260 seconds) 12.01.36 Join XavierGr [0] (~xavier@rockbox/staff/XavierGr) 12.02.02 Quit XavierGr (Client Quit) 12.02.36 Join XavierGr [0] (~xavier@rockbox/staff/XavierGr) 12.03.52 Join OzzieJacks [0] (~OzzieJack@24-246-47-198.cable.teksavvy.com) 12.11.53 Quit The_prospector (Read error: Connection reset by peer) 12.11.55 Join The_prospector|2 [0] (baconmaste@unaffiliated/cornman) 12.12.52 # Does rockbox downsample the color depth of images when they are loaded with %x and not when loaded with %X? 12.13.06 # I am experimenting with the %VB tag and when I load a background image with %x it looks 8-bit. 12.13.19 # This is on an SDL build. 12.19.01 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 12.21.41 Join jdgord [0] (~jdgord@rockbox/developer/JdGordon) 12.22.17 Join lorenzo92 [0] (~chatzilla@host147-111-dynamic.21-79-r.retail.telecomitalia.it) 12.31.18 # kugel: I have just checked: radio_init is not called uhm uhm 12.31.25 # from main... 12.32.07 Quit anewuser () 12.34.16 # pff I cannot understand, It's a little weird going through all the ifdefs, opinions needed :D 12.34.43 Quit mc2739 (Ping timeout: 252 seconds) 12.39.47 # lorenzo92: I fixed that a few hours ago 12.40.34 # ahh okay :) so now how to proceed? I mean, how to update the source within my current workspace? sorry but this git is something really different from svn 12.40.45 # (but loot better :)) 12.42.45 # lorenzo92: rebase your branch. (git rebase origin/master) 12.42.55 # and push once more to gerrit 12.43.21 # after doing and ammending your other changes 12.47.30 Quit lorenzo92 (Ping timeout: 264 seconds) 12.54.51 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 12.56.24 Quit pamaury (Remote host closed the connection) 12.57.11 Join ccri [0] (551ff31e@gateway/web/freenode/ip.85.31.243.30) 13.00.50 # hi, i have problem with my fuze+ and i don't niow what i can do to fix it.. If i start it in rockbox bootloader then thiis give me "Not file found". In OF - i see logo and nothing more.. Would somebody help me? 13.01.50 # What is the exact error that the bootloader gives you? 13.03.09 # [..] Loading Fireware.. \n"File not found.. 13.04.24 # that means bootloader can't find .rockbox folder or actual rockbox image inside it 13.05.31 # <[Saint]> Which could mean a multitude of things... 13.05.51 # <[Saint]> The fact that it happens (or, a similar thing happens) in the OF also is quite worrying, though. 13.05.59 # <[Saint]> Perform a disk check. 13.06.18 # and when i boot in OF then this logo displaying nonstop 13.06.27 Quit OzzieJacks (Ping timeout: 246 seconds) 13.06.28 # <[Saint]> Yes, I read that. 13.06.33 # <[Saint]> Perform a disk check. 13.06.49 # how i can do that? 13.06.57 # <[Saint]> What OS do you use? 13.07.07 # liniux 13.08.32 # when i try with gparted there is no sdb partitions 13.09.45 # <[Saint]> fsck -r /mount/point/of/device 13.09.59 # dd if=/dev/sdb of=/dev/null dd: opening '/dev/sdb': No medium found 13.10.41 # that same with sdc 13.11.55 # ls -1 /dev/sd{b,c}*|wc -l (only 2 lines) 13.12.35 Join skx` [0] (skx@78-22-77-137.access.telenet.be) 13.14.00 # i dont have mount point 13.14.51 # So, none of: Rockbox, the OF or your PC can "see" the flash storage? Have you opened the player up and messed with the connection? 13.15.10 # I don't advise doing that! Just wondering if you have already done this? 13.16.34 # i connect the usb in rockbox then this is freezed then i disconnect and do hardreset.. and it looks like now 13.17.07 *** Saving seen data "./dancer.seen" 13.17.10 Join TheLemonMan [0] (~LemonBoy@adsl-ull-87-254.45-151.net24.it) 13.19.40 # looks like partition with data is dead 13.23.09 Quit mc2739 (Ping timeout: 276 seconds) 13.24.54 # maybe dd'ing this in recovery mode can fix it? 13.25.57 # http://www.rockbox.org/irc/log-20120206#15:36:58 13.26.55 # ccri: wait for funman - he is our sansaAMS expert 13.27.22 # ok 13.30.10 Quit [Saint] (Remote host closed the connection) 13.35.22 # btw. This player is still under warranty. How rockbox users are treated by SanDisk? 13.36.42 # in the case that is hardware.. 13.40.24 # hm 13.40.50 # %x(foo,...) works while %x(fo,...) doesnt 13.45.04 Join lorenzo92 [0] (~chatzilla@host199-104-dynamic.17-79-r.retail.telecomitalia.it) 13.46.07 Quit lorenzo92 (Client Quit) 13.46.29 Join lorenzo92 [0] (~chatzilla@host199-104-dynamic.17-79-r.retail.telecomitalia.it) 13.48.33 # kugel: i did the rebase but as output I got: "Current branch is up to date" 13.57.52 Join einhirn [0] (Miranda@vpn10.rz.tu-clausthal.de) 13.58.14 Quit einhirn (Client Quit) 14.02.41 # lorenzo92: try git fetch origin first 14.02.51 # that downloads the updates from the git server 14.04.36 # kugel: git pull --rebase will do that for you, also 14.05.14 # if he has checked out master locally yes 14.06.26 # not sure what you mean; pull will always grab the upstream of the current branch, whatever that branch is and whatever the upstream is 14.07.37 # that's what it's for 14.09.52 # okay thank you both, before I need to update my git repository on the pc (git pull --rebase) and then it's ok ;) 14.10.15 # I'll do again a git commit -a --amend to be sure, I'll compile to check and then I'll push! 14.20.19 # wodz: My thoughts about how lcdif works. Lcdif expect commands and data in one of two forms: 24bit or 16bit. lcd_data_transform required for transforming 16bits to 24. Now we can use 16bit format and transform doesn't need at all. lcdif doesn't know what kind of data we send (some kind of parameters or pixels), so ALL commands and ALL data must be in 24bit form or 16bit form (not only pixels). 14.21.46 # mortalis: yeah, that was my though also but I hadn't time to proof this 14.22.14 Join pamaury [0] (~quassel@sphinx.lix.polytechnique.fr) 14.22.14 Quit pamaury (Changing host) 14.22.14 Join pamaury [0] (~quassel@rockbox/developer/pamaury) 14.35.49 Quit lorenzo92 (Ping timeout: 260 seconds) 14.56.00 Quit rudi_s (Ping timeout: 252 seconds) 15.00.24 Quit perrikwp (Read error: Connection reset by peer) 15.01.36 Join perrikwp [0] (~quassel@cpe-024-163-024-033.triad.res.rr.com) 15.10.07 Quit mortalis (Quit: KVIrc 4.1.1 Equilibrium http://www.kvirc.net/) 15.14.44 # pamaury: hi, I have fuze+. When I poweron it there is "Not file found". In OF i see only logo for few minuts then auto-poweroff. This happened first time when i put usb in rockbox, it freezed and i do hardreset... What can I do to fix it? Would you help me? 15.15.55 # ccri: sorry I misread your player type. pamaury is fuze+ expert 15.17.10 *** Saving seen data "./dancer.seen" 15.17.19 Join Rower85 [0] (husvagn@v-413-alfarv-90.bitnet.nu) 15.17.23 # no porblem :) 15.18.36 # ccri: what happen if you plug the usb cable ? Does it mount ? 15.19.45 # yes but only /dev/sdb and if i dd if=/dev/sdb of=/dev/null then dd puts me: opening '/dev/sdb': No medium found 15.20.17 # s/yes/no/ 15.20.28 Quit wodz (Quit: Leaving) 15.21.00 # did you try to usb the OF usb mode ? Power off, hold volume down and plug the usb cable and after a few seconds release volume down 15.21.13 # *to use 15.21.13 # black screen 15.21.40 Quit evilnick (Ping timeout: 245 seconds) 15.21.56 Join rudi_s [0] (~simon@austria125.server4you.de) 15.21.58 # only black screen 15.22.29 # do you have a micro-sd ? 15.22.52 # no 15.23.26 # hmm, that doesn't sound too good, perhaps a hardware problem...Do you have linux or windows ? 15.24.24 # linux 15.25.34 # and i have rockbox with source 15.25.50 # ok cool, then we try to reinstall the OF, see if it works 15.26.14 # ok 15.26.24 # basically you first need to follow http://www.rockbox.org/wiki/SansaFuzePlusPort until the mkimxboot step 15.26.37 # when you are there please tell me 15.27.08 Join WalkGood [0] (~4@unaffiliated/walkgood) 15.27.17 # ok i have this 15.27.46 # done before 15.27.56 # ok then run the same ./mkimxboot command but replace "dualboot" with "recovery" 15.28.41 # ok 15.29.05 # whats now? 15.29.05 # then send put your device in recovery mode (power off, hold volume up and plug usb, wait a few seconds) 15.29.58 # ok :) black screen but something in dev 15.30.59 # If not done, you need to build sbloader (in utils/imxtools) and then the sb file produce by mkimxboot to the device this way: ./sbloader 1024 file.sb 15.30.59 # sbload? 15.31.15 # ok 15.31.19 # whats now? 15.31.39 # the screen should not stay black and display a few things 15.32.23 # and it should report as a mass storage device 15.32.24 # no partition found/usb: connected/bootloader usb mode 15.33.03 # i see only /dev/sdb* 15.33.12 # ok, try to run fdisk on it 15.33.55 # http://paste.xinu.at/yey7M/ 15.34.16 Quit bluebrother (Disconnected by services) 15.34.22 Join bluebrother [0] (~dom@rockbox/developer/bluebrother) 15.35.13 # ok, now you need to have the OF sb file at hand (sandisk-firmware.sb) and dd it to /dev/sdb2 this way: 15.35.13 # dd if=sandisk-firmware.sb bs=512 seek=4 of=/dev/sdb2 15.35.23 # (don't forget the seek=4 !!) 15.37.19 # sandisk? OF or patched? 15.37.39 Quit fs-bluebot (Ping timeout: 260 seconds) 15.37.45 # OF 15.38.08 # ok 15.38.53 Join fs-bluebot [0] (~fs-bluebo@g224239227.adsl.alicedsl.de) 15.40.20 # When finished, just unplug your device and try to boot normally. Hopefully the OF should work 15.41.38 # i hope too. this player iis under warranty. How rockbox users are treated by SanDisk? If it's hardware. 15.42.10 # oups: dd: writing '/dev/sdb2': Input/output error 15.43.28 # pamaury: nothing to worry? 15.43.35 # not normal 15.44.30 Join Topy44 [0] (~Topy44@f048238189.adsl.alicedsl.de) 15.45.33 # if you can't write the firmware you won't be able to do anything. Did it write something or failed on the first sector ? 15.46.12 # dd isnt quit, looks like it do something 15.46.22 # but i dont know 15.47.08 # to know what dd is doing you can run kill -USR1 `pidof dd` in another console iirc 15.47.29 # empty 15.48.36 # so dd is still doing something ? 15.49.20 # thats look. locked cmd line.. 15.49.42 # doing or freezed 15.50.44 # probably freezed 15.50.57 # try to unplug your device 15.50.58 # http://paste.xinu.at/1u3/ 15.51.21 # output.. 15.52.00 # hmm, that is quite bad because if it successfully wrote something, it mean your device will not boot because the image is corrupted... Can you try to boot it or boot the OF ? 15.52.52 # exacly like before, nothiing change 15.53.15 # so it's stuck at the logo ? 15.53.23 # yeah 15.53.45 # and i see rockbox bootloader 15.54.35 # it really seems similar to the common hardware failure of the fuze+: the internal storage doesn't write anymore :( Perhaps you can retry the procedure: put it in recovery mode, sbload the bootloader and dd the OF ? 15.55.14 # i can try 15.59.16 # how about service and rockbox? 16.00.01 # no idea, i think using rockbox can void the warranty but as usual that's up to the service... 16.00.03 # again: dd: writing '/dev/sdb2': Input/output error 16.00.25 # I don't know of anyone who had this problem and was still under warranty I think 16.00.39 # when did you buy it ? 16.00.54 # did it happen immediately after putting rockbox on it and did rockbox worked for a while ? 16.02.48 # i buy it for my trip i december 2011, cheap and good and rocbox in road.. :) rockbox in board after march 2012.. 16.04.46 # if nothing shows up at all you can say its because of their firmware updates 16.05.07 # TheLemonMan: unfortunately, rockbox bootloader shows up :-/ 16.05.50 # hrm, you can try destroying the bootloader 16.06.14 # we just tried without success 16.06.25 # nand stuck in ro ? 16.06.30 # yeah 16.07.19 # you write something but in fact nothing is written. Writing a single byte would be sufficient to prevent it from booting... 16.07.59 # thats really strange. is the code using the gpmi hw ? 16.08.22 # no the flash has a sd interface 16.08.42 # emmc to be more precise 16.09.40 # any chance to dump the debug registers after/before the write ? 16.10.36 # He is not the first one, Jean-Louis Biasini who helped the port also had it and several people reported similar problems on the Sandisk forums. We did advanced experiments on Jean-Louis's device and it really sounded like a hardware bug: you write, the flash reports success. 16.11.48 Quit jdgord (Quit: Bye) 16.12.18 # ccri: I'm really sorry but I can't do much more. If you are willing to try, I could experiment one more thing but it's unlikely to work 16.13.30 # i can try if it might help me or sombady else 16.13.55 # that's just to test a theory, it can't harm anyway 16.14.03 # ok 16.14.25 Join enthdegree [0] (~BitchX@unaffiliated/enthdegree) 16.14.25 # ok, you need to edit some code: open bootloader/imx233.c 16.15.51 # ok i have 16.15.52 # around like 160, just before "ret = storage_init();", insert the following lines: 16.15.52 # printf("unplug USB"); 16.15.52 # sleep(HZ * 10); 16.15.52 DBUG Enqueued KICK pamaury 16.15.52 # power_off(); 16.15.56 # *line 16.17.28 # then recompile the bootloader, rebuild the recovery image using mkimxboot and send it using sbloader. It should display a few lines and then print "unplug USB". At this point, unplug the cable and wait a few second. The device should powerdown itself. Then try to reboot normally 16.18.23 # This will force a clean power down, the fuze+ is quite sensitive to this. 16.19.21 Join The_prospector [0] (baconmaste@unaffiliated/cornman) 16.19.46 Quit The_prospector|2 (Read error: Connection reset by peer) 16.26.21 # ok done.. what now? 16.26.52 # pamaury: ^^ 16.27.15 # just try to boot, if the situation doesn't improve then I can't do more. 16.28.28 # nothing improved i think 16.29.10 Quit XavierGr () 16.41.58 Quit TheLemonMan (Quit: WeeChat 0.3.7) 16.47.46 Quit Keripo (Quit: Leaving.) 17.04.46 Part LinusN 17.10.38 Quit Thra11 (Ping timeout: 265 seconds) 17.17.14 *** Saving seen data "./dancer.seen" 17.17.26 Join n1s [0] (~n1s@nl118-175-223.student.uu.se) 17.17.26 Quit n1s (Changing host) 17.17.26 Join n1s [0] (~n1s@rockbox/developer/n1s) 17.20.58 Join Thra11 [0] (~thrall@87.113.53.243) 17.29.26 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 17.34.25 # any news regarding the ipod nano 2g usb charger issue? 17.37.45 Join swilde [0] (~wilde@aktaia.intevation.org) 17.46.07 Quit mc2739 (Ping timeout: 240 seconds) 17.47.14 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 17.48.28 # which issue exactly? 17.50.02 Join mortalis [0] (4d6c62b1@gateway/web/freenode/ip.77.108.98.177) 17.56.35 # funman: IIRC the fact that the nano2g doesn't detect chargers properly because it's not doing DETECT_BY_REQUEST, which is obviously blocked by usb not working at all 18.04.19 # that one indeed :) 18.04.25 # any progress yet? 18.05.23 # no 18.13.00 Quit Zambezi_ (Changing host) 18.13.00 Join Zambezi_ [0] (Zulu@unaffiliated/zambezi) 18.13.08 Nick Zambezi_ is now known as Zambezi (Zulu@unaffiliated/zambezi) 18.13.45 Join domonoky [0] (~Domonoky@rockbox/developer/domonoky) 18.14.35 Join jordan` [0] (~gromit@2001:660:3302:2826:225:90ff:fe20:d9a8) 18.30.20 Quit jordan` (Quit: Coyote finally caught me) 18.30.34 Join jordan` [0] (~gromit@2001:660:3302:2826:225:90ff:fe20:d9a8) 18.43.18 Join TheLemonMan [0] (~LemonBoy@adsl-ull-87-254.45-151.net24.it) 18.50.12 Quit swilde (Remote host closed the connection) 18.51.03 Join bertrik [0] (~bertrik@ip117-49-211-87.adsl2.static.versatel.nl) 18.51.03 Quit bertrik (Changing host) 18.51.03 Join bertrik [0] (~bertrik@rockbox/developer/bertrik) 18.53.55 Quit pamaury (Remote host closed the connection) 18.59.09 Join lebellium [0] (~chatzilla@e179141057.adsl.alicedsl.de) 19.11.42 Join tisqueldotim [0] (~Pro7@178.16.7.243) 19.17.16 *** Saving seen data "./dancer.seen" 19.17.45 Quit enthdegree (Ping timeout: 265 seconds) 19.17.50 Join saratoga_ [0] (98032941@gateway/web/freenode/ip.152.3.41.65) 19.17.55 Quit saratoga_ (Client Quit) 19.24.15 Join alexrudnick [0] (~alexr@156-56-93-146.dhcp-bl.indiana.edu) 19.28.34 Join XavierGr [0] (~xavier@rockbox/staff/XavierGr) 19.39.24 Join leavittx [0] (~leavittx@89.221.199.187) 19.40.26 # hi there ... 19.43.15 Join bitcraft [0] (~bitcraft@173-20-20-92.client.mchsi.com) 19.43.42 Quit The_prospector (Read error: Connection reset by peer) 19.45.31 Quit pystar90 (Remote host closed the connection) 19.48.31 Join pamaury [0] (~quassel@vit94-1-82-67-248-70.fbx.proxad.net) 19.48.31 Quit pamaury (Changing host) 19.48.31 Join pamaury [0] (~quassel@rockbox/developer/pamaury) 19.59.44 Quit TheLemonMan (Quit: WeeChat 0.3.7) 20.09.34 Join lorenzo92 [0] (~chatzilla@host194-104-dynamic.17-79-r.retail.telecomitalia.it) 20.10.55 # how to publish a draft comment on gerrit? :S 20.12.50 # ah okay found :) 20.13.03 Nick kugel is now known as kugelp (~kugel@rockbox/developer/kugel) 20.13.25 # lorenzo92: use the review button 20.13.38 # exactly :D 20.14.05 # hi there ... can i put rockbox o my ipod v5 yet ?? 20.14.17 # ipod classic that is .... 20.14.44 # kugelp: before committing I wanted to discuss about debug_menu includes... 20.17.47 # tisqueldotim: the 5th gen has been supported for ages. The 6th gen (classic) mostly works, but it's not really recommended yet as there are serious limitations (such as no dual boot, no integration in the rockbox installer, possibly some instabilities...) 20.23.48 # JdGordon: b37e6bc8c (lcd rework) breaks the mr100. Any suggestions on what to try? 20.23.57 # gevaerts, I'll just check if i've actually got that .... 20.25.59 # gevaerts, Yeah I've gt the 6th gen 120GB model ... how do proceed ?? 20.26.20 # **I 20.27.56 # tisqueldotim: have a look at http://www.rockbox.org/wiki/IpodClassicPort 20.28.00 # I don't know much more 20.28.08 Join einhirn [0] (~Miranda@p4FC75086.dip0.t-ipconnect.de) 20.30.49 Quit WalkGood (Quit: ♪ ♫ ♪ ♫ ♪ ♫ ♪) 20.32.20 Quit einhirn (Ping timeout: 248 seconds) 20.35.09 # OK so I've got a bid on a 5th gen ipod that finishes in 20 minutes..... I really need a no0b's guide as to how to load rockbox to it... is there a decent guide available (I will keep on this channels for the next 24 hours for all of your responses ) thanx in advance... :) 20.37.40 # fs-bluebot: .explain manual to tisqueldotim 20.37.40 # tisqueldotim: 3manual: The Rockbox manual is available in PDF and HTML format at http://www.rockbox.org/manual.shtml 20.37.57 # opening... 20.38.08 # Commit debe77a in rockbox by 03Dominik Riebeling: Check for existing firmware file on H100 / H300. 20.39.09 Quit XavierGr (Disconnected by services) 20.39.11 Join XavierGr [0] (~xavier@rockbox/staff/XavierGr) 20.40.36 # debe77a build result: All green 20.41.44 # So I have a Sansa Clip+ that seems to be stuck on the "Refreshing your media" screen from the original firmware, but I'd really like to install Rockbox on it -- does anybody know how to do a hard reset on such a device, if it won't boot up? 20.41.46 # bluebrother, I guess i'm looking at the ipod "video" for the 5th gen , then ?? 20.43.59 Join anewuser [0] (~anewuser@186.93.204.61) 20.43.59 Quit anewuser (Changing host) 20.43.59 Join anewuser [0] (~anewuser@unaffiliated/anewuser) 20.44.46 Quit Topy44 (Ping timeout: 246 seconds) 20.45.15 # All I really want to know ... is is it possible to have a 128GB CF card used with an ipod using rockbox ?? 20.45.51 # if you manage to physically get it done there is no reason for that to not work. 20.46.07 # That should work, although I do seem to remember that the ipod video is a bit picky about CF adapters 20.46.08 # if you want to CF mod an Ipod I'd suggest going for an Ipod mini 20.46.24 # since the mod is dead easy on that one. 20.46.41 # oh OK .. so an ipod mini ... does that do video ?? 20.46.49 # of course that also means you don't get a color display -- it's a mini after all 20.47.15 # well, Rockbox can play mpeg2 video. But you really don't want to use that on a greyscale player ... 20.47.22 # Interesting ... thank-you one and all !! 20.47.29 # but what's the point about video on Ipods anyway? 20.47.57 # todays mobile phones, tablets and laptops are much better suited for playing back video 20.48.15 # mm video on ipod means you can watch vodcasts , isn't it ?? 20.48.27 # vodcast? 20.48.34 # podcast +video 20.48.59 Ctcp Ignored 1 channel CTCP requests in 0 seconds at the last flood 20.48.59 # * bluebrother doesn't have a need for that 20.49.08 # sure thing ... 20.49.40 # after all, a DAP is for mobile use. And when being mobile you also need to look after other things than the player :) 20.50.04 # My 2nd question is that i want to display "lyrics" on my songs/ tracks so i can do language learning programs etc.... 20.50.08 # and for things like a train trip a laptop is much better. Bigger display, ... 20.51.28 # * tisqueldotim recalls he doesn't have trains in iom... :) 20.51.47 # lorenzo92: then discuss :-) 20.51.55 # so the / lyrics / question ..... 20.51.59 # look for lrcplayer in the manual 20.52.11 # scanning... 20.52.39 # hmm, why isn't lrcplayer documented in the wiki? 20.53.06 Join Topy44 [0] (Topy44@f049076032.adsl.alicedsl.de) 20.54.22 # says it doesn't sync anyway .... http://www.rockbox.org/tracker/task/12486?string=lrcplayer&project=1&type%5B0%5D=&sev%5B0%5D=&pri%5B0%5D=&due%5B0%5D=&reported%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B0%5D=&opened=&dev=&closed=&duedatefrom=&duedateto=&changedfrom=&changedto=&openedfrom=&openedto=&closedfrom=&closedto= 20.56.16 # not exactly. 20.56.42 # that entry says that there is a problem with a specific combination of tags. 20.57.16 # oh ok .. where's the wii entry then ?? 20.59.05 # wii? How is that related to a console? 20.59.47 # sox wiki ... 20.59.57 # **soz wiki '... 21.00.02 # wtf? 21.00.21 # i meant is there a wiki entry .... 21.00.33 # no 21.00.50 # can i alter the wiki ?? 21.00.58 # as I said earlier, lrcplayer is documented in the manual, but (for some reason not known to me) not in the wiki 21.01.15 # well, the point of a wiki is to get edited by people, isn't it? 21.01.35 # oh ok then .. perhaps i will .. 21.02.54 # coffee on the go ... brback ... 21.03.02 Quit mortalis (Quit: Page closed) 21.08.59 Nick kugelp is now known as kugel (~kugel@rockbox/developer/kugel) 21.10.20 # lorenzo92: you didn't rebase properly 21.10.25 Quit alexrudnick (Quit: leaving) 21.11.16 # the commits before yours are 4 days old. the radio_init fix was today 21.13.23 # see git log output 21.17.17 *** Saving seen data "./dancer.seen" 21.17.57 Quit leavittx (Ping timeout: 252 seconds) 21.21.59 # kugel: I can see your commits, beware that I did not pushed last modifications yet ;) 21.22.35 # okay. I was looking at your last push 21.22.50 # ah okay I'll do it right now ;) 21.23.57 # its strange that you need to include radio.h in debug_menu.c to enable a debug item 21.25.43 # it isn't because it is imported only on NATIVE platforms following ifdefs... 21.26.16 # okay 21.26.33 # I also reviewed keymappings ;) 21.26.33 # then its probably OK 21.29.13 # committed... 21.29.37 Join TheLemonMan [0] (~LemonBoy@adsl-ull-87-254.45-151.net24.it) 21.32.57 # cool. so, what about the kernel module? 21.34.37 # eh good question...I tried with the makefile I sent you some days ago but apparently there was something wrong (nothing to be done for all..,but no executable uhm) 21.35.03 # basically I guess we need only kernel's headers 21.35.04 # ah yeah 21.35.54 # that was because the all target doesn't create a file named all 21.36.34 # yes I would like a solution where we only import the header into our tree 21.37.15 # so basically my makefile was non-working you say? 21.37.44 # it needs some tweaks 21.38.05 # anyway, it depends on the kernel source 21.39.17 # uhm 21.39.30 # what do you mean? 21.42.25 # you need the extracted kernel source for it no? 21.44.08 # yes yes and I did something, got /home/lorenzo/YP-R0_DEV/si4709_module/.tmp_versions/si4709.mod: Directory nonexistent 21.44.14 # I'll try to mkdir... 21.45.08 # uhm it doesn't do something special...just creates a .mod file! 21.45.52 # that's right isn't it? 21.46.12 # but nothing else... 21.46.40 # its content is both path for output .ko and .c 21.46.50 # *.o 21.50.44 # kugel: wait! I got the .o file! 21.50.51 Quit dfkt (Quit: -= SysReset 2.55=- Sic gorgiamus allos subjectatos nunc.) 21.52.19 # kugel: got it! 21.52.51 # from terminal, I run that first: make -C ../linux-2.6.24-2.4.2-base ARCH=arm CROSS_COMPILE=arm-ypr0-linux-gnueabi- M=`pwd` modules 21.52.53 # then 21.53.04 Join leavittx [0] (~leavittx@89.221.199.187) 21.53.06 # make -C ../linux-2.6.24-2.4.2-base ARCH=arm CROSS_COMPILE=arm-ypr0-linux-gnueabi- M=`pwd` si4709.o 21.53.13 # ops sorry the other way round :p 21.55.34 Join enthdegree [0] (~BitchX@unaffiliated/enthdegree) 21.57.40 Quit Thra11 (Ping timeout: 252 seconds) 21.59.45 # uhm cannot achieve it again lol 22.00.56 # pff I'm little lost :D 22.01.42 Join since96 [0] (~chatzilla@ARennes-358-1-224-104.w2-12.abo.wanadoo.fr) 22.01.44 Join Thra11 [0] (~thrall@87.115.12.108) 22.01.47 # hi 22.02.05 # what is the programming langage used in rockbox ? 22.03.20 # C 22.03.42 # are you sure ? 22.04.12 # how can i made games for it ? 22.04.23 # yes ;) mainly C, then there are also some scripts (makefiles, and others too) 22.04.41 # is python used ? 22.04.42 # I think you can write a game in lua too 22.04.47 # since96: you should have a look at "plugins developement" ;) 22.04.58 # yes lua too 22.05.06 # ok, thanks lorenzo and bertrik :) 22.05.07 # python -> not supported 22.05.22 # damn ! :/ 22.05.35 # hehe too easy :p I'm jocking hihi 22.05.42 # ^^ 22.05.54 # anyway you could take a look at already developed plugins too to get an idea ;) 22.06.20 # where is the plugins developpement page ? :-/ 22.06.25 # sorry, I also don't know how to properly build kernel modules 22.06.30 # i can't find it ^^ 22.06.58 # kugel: uhm at least I have seen the .ko file :) tomorrow I will investigate into that better... 22.07.19 # in case, suggestion where to put the make script? 22.09.57 Quit since96 (Quit: ChatZilla 0.9.88.2 [SeaMonkey 2.8/20120312220748]) 22.10.56 # I'd say integrate it into the patch-firmware.she script in utils/ypr0 22.11.53 # okay I'll dig that tomorrow ;) 22.12.00 Quit lorenzo92 (Quit: ChatZilla 0.9.88.2 [Firefox 11.0/20120310010316]) 22.14.32 # gevaerts: I think http://git.rockbox.org/?p=rockbox.git;a=blobdiff;f=firmware/target/arm/olympus/mrobe-100/lcd-remote-mr100.c;h=edcdde72535e1d08adf6a71382d2bc3ac12f0c80;hp=aa3d228952f6b9fc30c8033c01c88bba8a708c64;hb=b37e6bc8c119289aca8740dd5e3b60d72f9d6b40;hpb=15c69b8bafc3e89e1a825b5bbefef4a97f0001b1 lacks a * for dereference 22.15.31 # kugel: that URL didn't survive for me. Do you have a line number? 22.16.26 # * gevaerts looks at the diff 22.16.27 # hm 22.16.30 # Yes 22.17.46 # or no, not sure 22.17.58 # oh that's already fixed in master 22.19.50 # It almost has to be something like that though 22.24.09 # Hmm 22.24.24 # Either that or it broke again later and my bisect is wrong 22.25.10 # * gevaerts investigates that possibility 22.27.30 # Seems not. c0a2c3fe is still broken 22.27.58 # Hm, it *does* sometimes get to the menu, and it definitely gets to the splash screen 22.28.21 Quit adnap (Ping timeout: 245 seconds) 22.28.52 Join Keripo [0] (~Keripo@seas0885.wireless-pennnet.upenn.edu) 22.42.55 Quit leavittx (Ping timeout: 260 seconds) 22.51.26 Join dhrasmus [0] (~dhrasmus@c-98-246-195-168.hsd1.or.comcast.net) 22.58.22 Quit TheLemonMan (Quit: WeeChat 0.3.7) 23.03.44 Quit bitcraft (Remote host closed the connection) 23.14.00 Quit n1s (Quit: Ex-Chat) 23.16.18 Quit Thra11 (Ping timeout: 265 seconds) 23.16.36 Join Thra11 [0] (~thrall@46.208.210.23) 23.17.21 *** Saving seen data "./dancer.seen" 23.29.17 Quit dhrasmus (Quit: Leaving) 23.37.21 Quit Thra11 (Remote host closed the connection) 23.40.00 Join Thra11 [0] (~thrall@46.208.210.23) 23.41.58 Quit Thra11 (Remote host closed the connection) 23.44.42 Join Thra11 [0] (~thrall@46.208.210.23) 23.48.01 Quit Keripo (Ping timeout: 252 seconds) 23.56.29 Quit pamaury (Remote host closed the connection)