--- Log for 08.07.112 Server: kornbluth.freenode.net Channel: #rockbox --- Nick: logbot_ Version: Dancer V4.16 Started: 23 days and 0 hours ago 00.01.34 Join belushka [0] (~Rough_Dom@optima2449.opti.carnet.hr) 00.01.38 # hi 00.02.13 # anyone know where I can find a list with hardware in sansa players? it was somewhere on rockbox site, but I can't remember where exactly 00.20.23 Join nosa [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 00.22.16 Quit mystica555_ (Ping timeout: 264 seconds) 00.22.35 Join mystica555_ [0] (~Mike@70-58-25-42.hlrn.qwest.net) 00.23.44 Quit nosa-j (Read error: Operation timed out) 00.23.47 Nick nosa is now known as nosa-j (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 00.24.20 Quit nosa-j (Client Quit) 00.26.53 Join nosa-j [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 00.32.45 Quit mystica555_ (Ping timeout: 246 seconds) 00.35.04 Join mystica555_ [0] (~Mike@97-118-135-8.hlrn.qwest.net) 00.35.15 # not sure we have a nice overview actually 00.37.21 # is the hardware in fuze v2 and clip + the same? 00.41.39 Quit Unhelpful (Ping timeout: 246 seconds) 00.44.30 Join Unhelpful [0] (~quassel@rockbox/developer/Unhelpful) 00.51.02 Quit ender` (Quit: The reason people use a crucifix against vampires is that vampires are allergic to bullshit. -- Richard Pryor) 00.53.07 Quit mgottschlag (Ping timeout: 248 seconds) 00.58.40 # belushka: http://www.rockbox.org/wiki/SansaAMS seems like a good place to start looking for info on ams based sansas 00.59.54 # under the "models" heading there are links to the various pages for the different ports 01.03.39 # I think it wouldn't hurt to have some list of sansa players and the SoC they contain 01.08.27 Quit domonoky (Read error: Connection reset by peer) 01.08.58 # bertrik, that page covers all the ams based ones at least 01.10.50 Join Wardo [0] (~Mirandaha@176-120-190-109.dsl.ovh.fr) 01.11.24 # thanks 01.11.26 Quit belushka () 01.12.26 Quit lebellium (Quit: ChatZilla 0.9.88.2 [Firefox 14.0/20120704090211]) 01.15.29 Join MikeH__ [0] (~Mike@97-118-129-67.hlrn.qwest.net) 01.18.04 Quit mystica555_ (Ping timeout: 264 seconds) 01.25.36 Quit n1s (Quit: Ex-Chat) 01.27.04 Quit MikeH__ (Ping timeout: 264 seconds) 01.28.06 *** Saving seen data "./dancer.seen" 01.30.06 Join mystica555 [0] (~Mike@97-118-129-67.hlrn.qwest.net) 01.37.17 Join tchan [0] (~tchan@lunar-linux/developer/tchan) 01.46.52 Quit mystica555 (Ping timeout: 264 seconds) 01.47.14 Quit pamaury_ (Remote host closed the connection) 01.47.38 Join mystica555 [0] (~Mike@97-118-129-67.hlrn.qwest.net) 01.49.48 Join kevinrocks123123 [0] (~485e0cf2@www.haxx.se) 01.50.53 # hello i need to know how do i make custom cfg. files for rockbox ? 01.52.25 Quit mystica555 (Ping timeout: 244 seconds) 01.52.39 # hello??? 01.52.43 Join mystica555 [0] (~Mike@70-58-25-50.hlrn.qwest.net) 01.53.37 # hello 01.54.34 # i need to know how do i make custom cfg.files for rockbox 01.54.40 Quit fs-bluebot (Ping timeout: 264 seconds) 01.56.02 # 15hello 01.56.05 Quit bluebrother (Ping timeout: 240 seconds) 01.56.06 Join fs-bluebot [0] (~fs-bluebo@f053152239.adsl.alicedsl.de) 01.56.17 # hello can you help 01.57.10 Join bluebrother [0] (~dom@rockbox/developer/bluebrother) 01.57.21 # hello can you help 01.58.47 # hello can someone help 02.00.17 # how do I coax the build system to compile a simulator build without optimizations? I want to debug it and the execution just keeps jumping around the source :P 02.00.28 # can you help 02.00.56 # kevinrocks123123: I don't even know what you're asking, and stop spamming the channel and annoying people 02.01.41 Join linuxstb [0] (~linuxstb@host86-183-199-248.range86-183.btcentralplus.com) 02.03.04 # well i want to help make custom theams for rockbox and custom icons 02.03.35 # im just asking for help 02.07.16 Quit mystica555 (Ping timeout: 264 seconds) 02.07.30 Join [Saint_] [0] (~Saint]@unaffiliated/saint/x-8516940) 02.07.38 Join mystica555 [0] (~Mike@70-58-25-50.hlrn.qwest.net) 02.27.04 Quit mystica555 (Ping timeout: 264 seconds) 02.27.30 # yuriks: edit the Makefile to add -O0 02.27.37 Join mystica555 [0] (~Mike@70-58-25-50.hlrn.qwest.net) 02.28.24 Quit Xerion (Quit: ) 02.29.39 Quit bertrik (Ping timeout: 248 seconds) 02.31.58 Quit shamus (Read error: Connection reset by peer) 02.32.10 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 02.33.51 # funman: ended up doing that. I thought that setting the debug flag in configure would do that, though 02.42.04 Quit mystica555 (Ping timeout: 264 seconds) 02.42.42 Join mystica555 [0] (~Mike@70-58-25-50.hlrn.qwest.net) 02.45.40 Quit TheLemonMan (Ping timeout: 264 seconds) 02.50.07 Quit Rower85 (Quit: Hmmm...) 02.50.28 Quit mystica555 (Ping timeout: 264 seconds) 02.51.19 # glyph fallback works :D 02.51.33 # in a hardcoded and leaks-fonts way, but works 02.52.34 Join mystica555 [0] (~Mike@70-58-25-108.hlrn.qwest.net) 03.07.16 Quit mystica555 (Ping timeout: 264 seconds) 03.07.39 Join mystica555 [0] (~Mike@70-58-25-108.hlrn.qwest.net) 03.14.26 Quit shamus (Ping timeout: 255 seconds) 03.15.18 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 03.20.15 Join SrRaven [0] (~SrRaven@93.186.32.118) 03.20.54 # Helllllllo,I'm using the rockbox utility and trying to do it with my Clip+ but whatever I do (with positive results) my firmware stays original,any ideas why? 03.24.06 # <[Saint_]> Doesn't sound very much like a positive result, then. 03.25.27 # <[Saint_]> Lets start with replacing "whatever I do" with what you're actually doing. 03.27.01 Quit kevinrocks123123 (Quit: CGI:IRC (EOF)) 03.28.00 # I tried the complete install and installing bootloader and rockbox in single steps 03.28.06 # all with the same result,that being none basicly 03.28.10 *** Saving seen data "./dancer.seen" 03.28.17 # I see the folders on the player,but thats it 03.29.22 # <[Saint_]> Are you administrator? 03.29.26 # yes 03.30.30 # <[Saint_]> The firmware file you're supplying is correct, ie. a firmware upgrade is performed with an unmodified file? 03.31.04 # I assume so, cause it wont let me add any other than the real one 03.32.36 # <[Saint_]> Possible stupid question: you've rebooted since? 03.32.57 # my mp3 player ? yes multiple times 03.34.00 # <[Saint_]> If its not performing a firmware upgrade, which should be very obvious, _something_ is going horribly wrong... 03.34.02 # <[Saint_]> Hmmm. 03.34.51 # Yeah no fcking idea what is going wrong at some step 03.35.22 # <[Saint_]> With it being rbutil related, and a target I don't own, best I can do is prod bluebrother 03.36.34 Join BHSPitMonkey [0] (~stephen@unaffiliated/bhspitmonkey) 03.36.48 # poopi 03.37.52 Quit mystica555 (Ping timeout: 264 seconds) 03.53.56 Quit shamus (Read error: Connection reset by peer) 03.54.26 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 04.03.06 Join TheSphinX^ [0] (~briehl@p5B3236F5.dip.t-dialin.net) 04.06.22 Quit TheSphinX_ (Ping timeout: 245 seconds) 04.12.37 Quit XavierGr () 04.12.48 # Hey, can someone review my change? http://gerrit.rockbox.org/r/290 04.13.27 Quit amiconn (Disconnected by services) 04.13.28 Join amiconn_ [0] (amiconn@rockbox/developer/amiconn) 04.13.33 Nick amiconn_ is now known as amiconn (amiconn@rockbox/developer/amiconn) 04.13.39 Quit pixelma (Disconnected by services) 04.13.40 # It implements glyph fallback for fonts. I tested it on my clip+ (and on the sim). I plan on improving it (configurability and better missing glyph detection) but for now it's already an improvement 04.13.40 Join pixelma_ [0] (pixelma@rockbox/staff/pixelma) 04.13.43 Nick pixelma_ is now known as pixelma (pixelma@rockbox/staff/pixelma) 04.16.26 # yuriks: first thought is that table is definitly not acceptable 04.18.10 # JdGordon: why? is it too large? 04.18.29 # no, its really not a good way to do it 04.19.21 # if you go through all the loaded fonts and check if the char exists then that is better 04.19.33 # but just loading extra fonts is not doable 04.21.06 # <[Saint_]> I'm not sure this is a sane way to handle it. I'd much rather see the default font for all cabbies be gnu uniting so it "just works", and implement the idea JdGordon had a while ago about themes asking for a font height rather than a particular font so the user can always supply their own font with the needed glyphs and a theme can still specify multiple font heights. 04.21.18 # what would load the fonts then? And a bunch of fonts have ranges that cover a lot of characters but neverthless have boxes filling most glyphs, so you need a whitelist anyway 04.21.26 # <[Saint_]> Bah! *gnu unifont 04.21.39 # unless you add in a 'valid glyph' bitmask to the font format 04.21.59 # [Saint_]: but unifont is only available in size 16, that's a problem 04.22.06 # it's a tricky problem, but I dont tihnk whitelisting 2 fonts is a good solution 04.22.09 # <[Saint_]> I can fix that. 04.22.52 # JdGordon: the intention is to move the whitelist to a config file 04.22.56 # <[Saint_]> I actually have a huge set of anti aliased gnu unifont fonts already. 04.23.23 # yuriks: are the ranges glyph codes? or file offsets? 04.23.24 # <[Saint_]> I don't think substitution of fonts from missmatched sets is any sort of fix. Sorry. 04.23.29 # JdGordon: glyph codes 04.23.33 # ok 04.24.01 # <[Saint_]> A font set with all glyphs, much saner. Its only the default theme we need to care about here. 04.24.05 # [Saint_]: my main reason for this is that Rockfont size 8 is perfectly readable, but lacks japanese characters 04.24.20 # meanwhile, Sazanami-Mincho has them, but at size 8 is pretty darn unreadable 04.24.48 # <[Saint_]> yuriks: so, wouldn't the easy fix just have been to ask for more fonts (I have a lot), or generate one? 04.25.02 # <[Saint_]> This seems like a big solution to a small problem. 04.25.16 # No, I like the sollution, just not with the lookup table 04.25.44 # <[Saint_]> I think ripping glyphs from other font sets is *ugly* personally. 04.25.56 # better than []'s though 04.25.59 # [Saint_]: it's the first thing I thought of, but it seemed quite inflexible. Visual end result is the same anyway 04.26.14 # <[Saint_]> And only works if you have a font of that height (or less?) that already has those glyphs. 04.26.28 # <[Saint_]> In which case it seems sane to use that font fully. 04.26.50 # yuriks: can you change it to go through all the loaded fonts and check the ones with the correct font size for the glyph please? 04.26.57 # that can then be configured later 04.27.08 # that will be pushed asap :) 04.27.38 # JdGordon: I'll have to see if it'll work. If not I'll have to go ahead and implement the invalid glyph heuristic 04.27.56 # also, the has_glyph() logic looks odd to me 04.28.02 # what is pf->size? 04.28.14 # anyone know if all fonts have a dedicated 'box' character, or do some use 'space' or whatever? 04.28.27 # <[Saint_]> Well...I for one am putting my hand up an saying "sorry, but, I hate this idea with a passion" 04.28.41 # JdGordon: that code is just ripped from what was in the functions before, only I moved it to a separate function 04.28.42 # <[Saint_]> I really am sorry, I just don't think its the right fix here. 04.28.59 # yuriks: ah ok, then we'll assume its correct :) 04.29.01 # pf->size is the number of glyphs in the font. It's the only indicator of what's a valid glyph contained in the font afaik 04.29.09 # it isn't failproof though 04.29.19 # [Saint_]: noted 04.29.21 # some fonts have missing glyphs inside that range 04.29.49 # so I was thinking of comparing the glyph data pointer to the 'default char' pointer to see if they're equal (and if soo, it's an invalid glyph) 04.30.17 # all it takes is a font pointing the default char to @ (like I think one does) or anothre valid char instead of the dummy 'box' glyph to break that though 04.30.36 # [Saint_]: What do you prefer? Baking fonts before hand? 04.31.30 # yuriks: yeah, I dont know the font format, but surely it should say if the char is missing or not? 04.31.42 # JdGordon: I don't think it does :( 04.32.47 # <[Saint_]> JdGordon: just so you know, you're aware the idea you had about themes asking for a font size, rather than a specific font, could negate this additional f***ery (and, IMO, is the "right" fix here (along with all cabbies using GNU Unifont which I'll supply fonts for)) yeah? ...just so I know. 04.33.11 # no it cant, not comeplty 04.33.15 # this is needed also 04.33.25 # <[Saint_]> How? 04.33.45 # <[Saint_]> To "fix" themes? That's the authors job. 04.34.06 # what is a user supposed to do if they want the latin glyhps from 16-aaaaa.fnt but that doesnt have the japanese glyphs? 04.34.24 # they are forced to remake the font (which is unacceptable), or find a different font 04.34.43 # (this is the approach taken by desktop font rendering engines, too) 04.34.51 # <[Saint_]> Use GNU Unifont that surely has all those glyphs? 04.35.13 # ? 04.35.26 # yuriks: there is pf->defaultchar which might be what you want? 04.36.05 # oh.... yuck 04.36.09 # JdGordon: that one indicates what's the box char code, not the glyph. It's a good way to test, but some fonts set it to a valid glyph 04.36.19 # valid character* 04.38.06 # [Saint_]: the reason im against the table is because its alot of nasty extra code... but just shooting through the loaded fonts adds very little overhead for alot of gain. of course fixing the fonts is the better option 04.38.18 # <[Saint_]> JdGordon: I guess my point is, that for this to work they will need to have a font (or fonts) that are a: the same height, and b: include the missing glyphs. Since GNU Unifont will already have all those glyphs, and we can make one for any needed height, shouldn't a user with these font requirements just be using GNU Unifont anyway? 04.38.51 # <[Saint_]> That seems saner to me than fuckery in-core to make it work. 04.40.23 # [Saint_]: Sazanami-Mincho is availabled in all sizes 8-14, so for at least CJK that has it covered 04.40.31 # <[Saint_]> Allow a way for the user to override hardcoded fonts, which you planned anyway, and it "just works" across the board. 04.41.09 # [Saint_]: but you always say how fugly gnufont is 04.41.45 # <[Saint_]> yuriks: for "just works" we really need 8~36 (I think I have most of these in my repo already in GNU Unifont) 04.42.10 # anyway, rockfont: https://dl.dropbox.com/u/1990844/2012-07/font-rockfont.png sazanami: https://dl.dropbox.com/u/1990844/2012-07/font-sazanami.png 04.42.11 # <[Saint_]> JdGordon: and you said it didn't matter I believe? 04.42.17 # and both on the same screen: https://dl.dropbox.com/u/1990844/2012-07/font-merged.png 04.42.22 # I think sazanami looks awful 04.42.29 # <[Saint_]> JdGordon: these would be in the font pack. 04.42.40 # <[Saint_]> (Apart from the one cabbie uses) 04.43.18 # <[Saint_]> No, I wouldn't put ~15 sets of unifont in the binary download :) 04.43.55 # <[Saint_]> We already ship one copy of gnu unifont anyway, so nothing lost. 04.44.21 # JdGordon: re. searching through loaded fonts: you'd still need a way to force loading of some font independently of the theme, though (unless there's already something that does that and I don't know about) 04.46.00 # <[Saint_]> There was talk of allowing the user to override fonts the theme hardcodes, so it only asks for a height, and could use any font of that height. 04.46.21 # yuriks: yes, but thats to be decided 04.46.41 # JdGordon: so you only object to the glyph ranges part of the table? 04.46.55 # the table lookup yes 04.47.16 # go through the loaded fonts array and chck those fonts for a suitable one 04.49.20 # I'll see if I can write a more reliable missing glyph detection, then do that 04.49.30 # I already found at least one font that gives problems 04.49.39 # * [Saint_] is reminded he should submit his GNU Unifont(s) to territory for the font pack. 04.49.42 # (claims to have glyphs but doesn't) 04.49.53 # <[Saint_]> What are the min/Max heights wanted there? 04.50.09 # what does unifont look like at size 8? 04.50.18 # <[Saint_]> I've gone up to 50px iirc, and as low as 10 I think. Need to check. 04.50.44 # <[Saint_]> yuriks: lets face it, it looks crap at any height :) 04.50.51 # scorche: can you add .sbs and .fms to the attachable extensions on the fourms please? 04.51.03 # I doubt it'll be usable at < 8px 04.51.09 # <[Saint_]> These are antialiased though, so look a little better than the bitmap versions. 04.52.43 Join webguest01 [0] (~d810416d@www.haxx.se) 04.55.03 # 12:42 <[Saint_]> JdGordon: and you said it didn't matter I believe? <- you misunderstood, my point was that your solution is not complete and we really should be doing glyph fallback for years 04.56.07 Quit [7] (Disconnected by services) 04.56.12 Join TheSeven [0] (~quassel@rockbox/developer/TheSeven) 04.58.00 # <[Saint_]> I think its weird though, as for it to work you'd need to have a font of that height, with the missing glyphs on the disk anyway...so if the user has specific glyph requirements that font should be being used. Not glyphs ripped from it. 04.58.52 # sure, but doing a best effort lookup is infinitly better than showing an empty box on the few glyphs which they might be missing (and not even know they need) 04.59.04 # you're forcing a fuck ugly font on pretty much everyone 04.59.43 # <[Saint_]> No, on those that require it. 05.00.25 # <[Saint_]> Its a fact that cabbie should be using GNU Unifont as a default, so its only custom themes that really matter here. 05.00.33 # 99.9% of the glpyhs I need are latin, but i cant be usre i dont have tracks which want CJK but the font im using doesnt have it 05.00.49 # for a few extra LOC which ideally wont run ever its worth it 05.01.12 # our font configuration system sucks - fact :p 05.12.27 Quit [Saint_] (Remote host closed the connection) 05.13.10 # is a sansa fuze+ the same as sansa fuze v2? 05.15.24 # <[Saint]> webguest01: No. 05.16.02 # so fuze+ is not supported then? 05.17.35 # <[Saint]> No, what gives you that idea? 05.17.57 # <[Saint]> It is clearly listed on the main page. Were it not supported, it wouldn't be. 05.19.09 # <[Saint]> If there's something the site says that gives you this impression, please tell us, and let us know how we might address it so that someone can do so if there's a legitimate need. 05.19.36 # I see it now, but in the unstable list 05.19.42 # <[Saint]> I think "Rockbox runs on these players, but is incomplete, less usable or has problems that limit it to advanced users:" is pretty clear, though. 05.19.42 # I was looking at this: http://www.rockbox.org/wiki/SansaFuze 05.19.49 # <[Saint]> Ah. 05.20.41 # <[Saint]> Well, the "Fuze(v1/2) and the Fuze+ are different targets, so you wanted: http://www.rockbox.org/wiki/SansaFuzePlus instead 05.21.18 # I see no, thanks 05.21.34 # *I see now, thanks 05.28.14 *** Saving seen data "./dancer.seen" 05.43.45 Quit webguest01 (Quit: CGI:IRC) 06.02.02 # JdGordon: I don't think there's any reasonable way to do better missing glyph checks. The idea I had breaks with fonts that need the glyph cache 06.02.20 # (the file offset of the glyph isn't known if it isn't in the cache) 06.10.49 Quit Wardo (Quit: Blarglarg) 06.15.19 Quit anewuser (Read error: Connection reset by peer) 06.27.05 Quit prof_wolfff (Ping timeout: 264 seconds) 07.03.35 # JdGordon: you dont have permission to do that? 07.03.55 # either way - added 07.10.28 Join nosa [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 07.13.02 Quit nosa-j (Read error: Connection reset by peer) 07.13.04 Nick nosa is now known as nosa-j (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 07.13.09 # JdGordon: I'm guessing changing the font format isn't acceptable? 07.21.34 # nevermind, I was thinking of including a bitmap of included glyphs, but even that will still be too large to load into memory 07.28.17 *** Saving seen data "./dancer.seen" 07.44.45 Join kevku [0] (x@heaaqi4aafadxgaamaafaadyaby.dyn.reverse.name) 08.11.29 Quit soap (Ping timeout: 264 seconds) 08.14.36 Join soap [0] (~soap@cpe-76-181-64-173.columbus.res.rr.com) 08.14.36 Quit soap (Changing host) 08.14.36 Join soap [0] (~soap@rockbox/staff/soap) 08.21.38 Join Ward [0] (~Mirandaha@176-120-190-109.dsl.ovh.fr) 08.22.02 Nick Ward is now known as Guest16919 (~Mirandaha@176-120-190-109.dsl.ovh.fr) 08.49.15 Join Tomthetom [0] (~adb0f21f@www.haxx.se) 08.49.22 # Hey people. 08.49.42 Quit Tomthetom (Client Quit) 08.51.16 Join einhirn [0] (~Miranda@p4FC746DD.dip0.t-ipconnect.de) 08.54.02 Join pretty_function [0] (~sigBART@123.252.215.215) 08.54.58 Join n1s [0] (~n1s@nl118-174-190.student.uu.se) 08.54.58 Quit n1s (Changing host) 08.54.58 Join n1s [0] (~n1s@rockbox/developer/n1s) 08.58.58 Join bertrik [0] (~bertrik@ip117-49-211-87.adsl2.static.versatel.nl) 08.58.58 Quit bertrik (Changing host) 08.58.58 Join bertrik [0] (~bertrik@rockbox/developer/bertrik) 09.05.54 Join lazerbeak [0] (~lazerbeak@host86-177-184-108.range86-177.btcentralplus.com) 09.25.34 Join TheLemonMan [0] (~LemonBoy@adsl-ull-200-213.50-151.net24.it) 09.26.16 # <[Saint]> heh... lazerbeak, awesome :) 09.26.31 # :D 09.26.33 # yuriks: yeah, prob not 09.27.54 Quit einhirn (Quit: Miranda IM! Smaller, Faster, Easier. http://miranda-im.org) 09.28.21 *** Saving seen data "./dancer.seen" 09.53.49 # whats the average price for a clip zip (in euros) ? 09.57.06 # I see one in a dutch webshop at about E40,- 09.57.59 # SrRaven: how did you select the player? Did you select it manually or did you use autodetection? 09.59.43 # bertrik: 4gb ? 10.00.06 # yes 10.00.42 # also. I'd like to see the output of the system trace (aftrr prforming the installation) and the system info 10.01.06 # both are located in Help / Troubleshooting 10.06.51 Join ender` [0] (krneki@foo.eternallybored.org) 10.12.19 Join yuriks_ [0] (~yuriks@189.58.188.90) 10.14.44 Quit yuriks (Ping timeout: 246 seconds) 10.15.55 # [Saint]: it's usually a good idea to ask for the output of those dialogs in case of problems :) 10.17.46 # <[Saint]> bluebrother: I probably should've done so, yes. But he may have got the impression I would have done something with them personally :) 10.18.16 # <[Saint]> As opposed to "Thanks, but you still have to wait for the guy that knows what he's doing" :D 10.19.11 # <[Saint]> bluebrother: he's still here, you can ask him now! 10.19.17 # * [Saint] runs away... 10.23.03 Join JdGord [0] (~AndChat80@114.72.182.78) 10.23.08 Quit pretty_function (Quit: time to get some munchies) 10.28.03 Quit TheLemonMan (Quit: WeeChat 0.3.8) 10.29.20 # [Saint]: I already did :) 10.42.51 Quit BHSPitMonkey (Remote host closed the connection) 10.42.57 Quit mikroflops (Ping timeout: 265 seconds) 10.52.57 # <[Saint]> bluebrother: so, what was the issue in the end? 10.53.09 # <[Saint]> Which obvious thing I should have thought of did I not think of? 10.53.46 # bluebrother I did it manually 11.12.03 Join mikroflops [0] (~yogurt@h-34-21.a238.priv.bahnhof.se) 11.25.49 Join Horscht [0] (~Horscht@xbmc/user/horscht) 11.28.19 Quit Horschti (Ping timeout: 248 seconds) 11.28.25 *** Saving seen data "./dancer.seen" 11.37.43 # SrRaven: are you absolutely sure your player is a clip+? 11.38.04 # also, as I said, please post the output of Help / Troubleshooting / System Info 11.38.43 # that way we can make sure the player is actually the player you think it is 11.39.05 # and there is a reason why we have an autodetection feature ... 11.39.08 # * bluebrother sighs 11.39.27 # seems we need to enforce autodetection at least on first run 11.40.42 # (for the record, we just had an issue with a user thinking his e200v2 is an e200v2 while it actually was an e200) 11.45.23 Join pamaury [0] (~quassel@vit94-1-82-67-248-70.fbx.proxad.net) 11.45.24 Quit pamaury (Changing host) 11.45.24 Join pamaury [0] (~quassel@rockbox/developer/pamaury) 11.48.31 Quit JdGord (Ping timeout: 252 seconds) 11.52.11 Quit yosafbridge (Quit: ERC Version 5.3 (IRC client for Emacs)) 11.52.23 Quit lazerbeak (Ping timeout: 246 seconds) 11.53.58 Join JdGord [0] (~AndChat80@114.72.191.1) 11.56.16 Join yosafbridge [0] (~yosafbrid@li125-242.members.linode.com) 11.58.28 # http://www.rockbox.org/wiki/HifimanPort have a error 11.58.28 Join pretty_function [0] (~sigBART@123.252.215.215) 11.58.46 # > 11.58.48 # cp /mn/img/SYSTEM/BASE.RKW /mnt/sd/.rockbox/ 11.58.54 # shount be 11.58.59 # cp /mnt/img/SYSTEM/BASE.RKW /mnt/sd/.rockbox/ 12.00.04 # <[Saint]> Szatan: it *is* a wiki... 12.01.32 # Rockbox says its a Sansa e200v2 series 12.02.38 # <[Saint]> Szatan: fixed. 12.03.03 # <[Saint]> Purely due to the fact it takes me less time to fix it that in does to grant you write access :) 12.03.16 # <[Saint]> *than it 12.04.28 # [Saint]: U Have iPod with CF card? 12.05.14 # <[Saint]> If in some alternate universe "U" is a substitution for "You", then yes. 12.05.43 # ok now for whatever reason it worked,did the same thing I did yesterday 5 times...blah 12.07.01 # I'll probably buy iPod Video 5G and buy 256GB CF card, it's should works? 12.08.55 # <[Saint]> You'll also end up spending a RIDICULOUS amount of money for this card. 12.09.04 # <[Saint]> I'm not sure you've looked into this too well. 12.09.40 # <[Saint]> iPod Video == $50~100, 256GB CF card == ~$600 12.11.29 # <[Saint]> this type of card is really more for industry leading photographic professionals, not DAP modders. Unless you class yourself as an audiophile, in which case you probably have $5000 power cables lying around to go with your magical color foil. 12.14.35 # <[Saint]> If you're really willing to spend anywhere near this price, I would suggest you get an iPod Classic and an SSD or equivalent capacity, which would still work out cheaper. 12.14.45 # <[Saint]> *ssd of 12.18.37 # <[Saint]> If you're not..then, I'm truly sorry for ruining the dream you had of bleeding edge technology being anywhere near affordable ;) 12.20.20 Join lazerbeak [0] (~lazerbeak@host86-177-184-108.range86-177.btcentralplus.com) 12.25.38 Quit Horscht (Quit: Verlassend) 12.27.34 # hmm, iPod Video probably support 250 GB storage 12.44.26 Join mgottschlag [0] (~quassel@HSI-KBW-091-089-250-086.hsi2.kabel-badenwuerttemberg.de) 12.44.27 Quit mgottschlag (Changing host) 12.44.27 Join mgottschlag [0] (~quassel@reactos/tester/phoenix64) 12.50.42 Join Rower85 [0] (husvagn@v-413-alfarv-90.bitnet.nu) 12.56.00 # <[Saint]> Szatan: What draws you to that (wrong) conclusion? 12.57.48 # why wrong? 12.58.23 # <[Saint]> Well, it depends on how "iPod" is used I suppose. 12.59.01 # are you saying that the Video won't cope with 250GB storage? 12.59.30 # <[Saint]> Oh, nevermind. I see what I did. 12.59.47 # <[Saint]> I added a word that wasn't there, and totally changed the meaning of the statement. 13.00.27 # <[Saint]> Szatan: Yes, yes it definitely does. The OF may not see all of it, but Rockbox won't care in the slightest. 13.01.25 # <[Saint]> for some reason I read: "Szatan> hmm, iPod Video probably doesn't support 250 GB storage"...my mistake. 13.06.36 Quit [Saint] (Read error: Connection reset by peer) 13.09.13 # oh 13.17.56 Join anewuser [0] (~anewuser@186.93.234.141) 13.17.57 Quit anewuser (Changing host) 13.17.57 Join anewuser [0] (~anewuser@unaffiliated/anewuser) 13.28.27 *** Saving seen data "./dancer.seen" 13.29.35 Join einhirn [0] (~Miranda@p4FC746DD.dip0.t-ipconnect.de) 13.40.11 Join domonoky [0] (~Domonoky@rockbox/developer/domonoky) 13.40.36 Part domonoky 13.46.34 Quit kevku (Quit: KVIrc 4.2.0 Equilibrium http://www.kvirc.net/) 13.48.41 Join lebellium [0] (~chatzilla@e179142046.adsl.alicedsl.de) 13.55.58 Quit einhirn (Quit: Miranda IM! Smaller, Faster, Easier. http://miranda-im.org) 14.07.02 Join [Saint] [0] (~Saint]@101.98.158.103) 14.07.03 Quit [Saint] (Changing host) 14.07.03 Join [Saint] [0] (~Saint]@unaffiliated/saint/x-8516940) 14.14.12 Join prof_wolfff [0] (~prof_wolf@82.159.1.234.dyn.user.ono.com) 14.41.52 Join einhirn [0] (~Miranda@p4FC746DD.dip0.t-ipconnect.de) 14.57.44 Quit pretty_function (Remote host closed the connection) 14.59.52 Join TheLemonMan [0] (~LemonBoy@adsl-ull-200-213.50-151.net24.it) 15.05.49 Quit mikroflops (Quit: <(^_^)>) 15.08.33 Quit einhirn (Quit: Miranda IM! Smaller, Faster, Easier. http://miranda-im.org) 15.21.31 # [Saint]: Untranslated voice strings are not supposed to be voiced. This is because unlike .lng, there is no built-in .voice 15.21.50 # That means there is nothing you can fall back to 15.24.51 # <[Saint]> I'm not sure what the "sane" fix is, including english.voice and tweaking the core to deal with more than one .voice file, or, including the untranslated strings as english and risking it sounding awful when translated by non-english tts. 15.25.00 Quit JdGord (Quit: Bye) 15.25.32 # <[Saint]> even if neither of those is sane, or a fix, it still seems quite terrible to me to voice *nothing* in the cases of untranslated strings. 15.26.15 # amiconn: you know the font stuff right? Is there a better way to check if a font has a glyph than the check in font.c? 15.26.26 # if (char_code < pf->firstchar || char_code >= pf->firstchar+pf->size) 15.27.36 # <[Saint]> including english.voice doesn't really seem to be an option, as this forces a voiced interface for all users by default instead of allowing them to choose to have voice or not by leaving the setting enabled and the voice file jsut not being present. 15.28.09 # <[Saint]> so the option I can think of that fills the gap immediately is including the untranslated strings as english text and risking it sounding crap. 15.28.28 *** Saving seen data "./dancer.seen" 15.28.55 # <[Saint]> evevn if it sounds a bit weird, it might offer a way out for a blind user with a poorly translated lang trying Rockbox for the first time(s) or so. 15.34.45 # <[Saint]> Presently, its a bit of a loaded trap for some langs. If for example a blind user spoke english somewhat, and (as the worst possible example) afrikaans...they would be able to navigate to the language selection and then promptly lose the ability to navigate the menus completely after choosing their native tongue because (through no fault of their own (and its not really easy to check)) that particular language doesn't have a *singular* voic 15.34.45 # <[Saint]> e string :) 15.35.52 Join Xerion [0] (~xerion@5419F5F4.cm-5-2d.dynamic.ziggo.nl) 15.43.06 # You can't rely on english.voice because it's not likely to be present 15.43.49 # Also you simply can't load two voice files on lowmem targets, at least if it's hdd based. Even a single .voice is *really* tight on some targets 15.44.45 # There is no sane fix 15.47.14 # <[Saint]> It doesn't necessarily have to be /too/ sane, it just needs to be functional enough to not leave a set of users completely in the dark if they happen to select their own (poorly translated) language without knowing it isn't fully supported. :) 15.48.05 # <[Saint]> which is why I thought of just using the english source text for untranslated strings instead of 'nothing at all'. 15.48.29 # <[Saint]> but, if it won't fit on some players...that's yet another issue :-S 15.49.43 # If we use english text, we should use the english voice strings from english.lang, not the source text 15.50.16 # <[Saint]> Oh, I thought they were one and the same. 15.50.19 # <[Saint]> My mistake. 15.50.50 # Of course a very nice solution on swcodec would be if we get espeak integrated. Then we can use espeak for everything not in .voice or .talk 15.51.09 # * [Saint] nods 15.52.07 Join mikroflops [0] (~yogurt@h-34-21.a238.priv.bahnhof.se) 15.52.37 # JdGordon: I don't know 15.53.48 # <[Saint]> the downside of this, is that it would break the translation website until sufficient magic was added for it to know that verbatim voice strings from english.lang in .lang were in fact still untranslated. 15.54.45 # <[Saint]> and, as good as it would be to offer a (potential) way out for users in this edge case, breaking the translation site isn't something I see as acceptable. 15.55.39 # <[Saint]> Just once I want to think of a problem that has a nice, easy, obvious solution...but all those were taken by early birds long ago :) 16.19.30 Join soap_ [0] (~soap@cpe-76-181-64-173.columbus.res.rr.com) 16.25.53 Join lebellium_ [0] (~chatzilla@g231209185.adsl.alicedsl.de) 16.28.16 Quit lebellium (Ping timeout: 264 seconds) 16.28.19 Nick lebellium_ is now known as lebellium (~chatzilla@g231209185.adsl.alicedsl.de) 16.29.10 Join kevku [0] (x@heaaqi4aafadxgaamaafaadyaby.dyn.reverse.name) 16.30.06 Quit lazerbeak (Ping timeout: 240 seconds) 16.36.13 Join pretty_function [0] (~sigBART@123.252.215.215) 16.39.14 Join Topy44 [0] (~Topy44@f049134025.adsl.alicedsl.de) 16.40.58 Quit soap_ (Quit: Leaving) 16.43.50 # I remember people reporting problems with USB when using a non-standard theme. Does anyone remember a specific trouble-causing theme? 16.50.38 # <[Saint]> fs#12639 16.50.39 # http://www.rockbox.org/tracker/task/12639 3lebellium Samsung-like theme for Clip Zip: WPS doesn't load properly and USB not working (bugs, unconfirmed) 16.52.40 # the WPS loads properly now 16.52.40 # <[Saint]> If tracing that through was non obvious, the example I knew of personally has been resolved (apparently). 16.53.02 # as for USB, I wouldn't say it's fully stable yet 16.53.15 # <[Saint]> heh, sorry lebellium, I gues fs-bluebot accidentally pinged you :) 16.53.22 # <[Saint]> *guess 16.53.23 Join Horscht [0] (~Horscht@p5DD576D2.dip.t-dialin.net) 16.53.23 Quit Horscht (Changing host) 16.53.23 Join Horscht [0] (~Horscht@xbmc/user/horscht) 16.55.40 # Yes the bot pinged me :D As I said, the Zip USB has never been full stable with rockbox yet. It's better than before but not as good as the OF yet 17.00.30 Quit pretty_function (Ping timeout: 255 seconds) 17.04.57 Join anewuser_ [0] (~anewuser@186.93.234.141) 17.05.01 # I made some stuff around playlist subsystem shutdown/startup a bit more robust, but I don't know if that was the cause for the USB problems 17.05.54 Quit anewuser (Ping timeout: 255 seconds) 17.06.24 # I use a build of the May, 16th so I should update to the latest build to see if there is a difference ;) 17.20.09 Join XavierGr [0] (~xavier@rockbox/staff/XavierGr) 17.25.47 # aww, i'm going to buy a zip and i just discovered the usb is bugged 17.28.32 *** Saving seen data "./dancer.seen" 17.35.52 Join benedikt93 [0] (~benedikt9@unaffiliated/benedikt93) 17.41.57 # TheLemonMan: how is it going with the Q2 port? :P 17.42.49 # lebellium: the Q2 has just died last monday :( 17.43.06 # arf... hw issue? 17.44.38 # dead touchpad, random reboots, usb issues 17.45.01 # i'm gonna move to a 4gb clip zip plus a 16gb sdhc 17.46.11 # so the R0 will remain the only recent rockboxed Samsung player forever :( 17.48.11 # TheLemonMan: what is the chip in the Q2 ? 17.48.34 # STMP3750 17.48.43 # ^ that 17.49.15 # i can give you some code i used to deal with the nand, i have no use for it anymore 17.49.32 # so it should be "easy" to port it soon since I'm working on the stmp3700 now. But if you don't have the hardware :-/ Yeah that would be of interest please 17.55.26 # can't find it yet, i need to search better. But it was just a matter of initializing some pins and building some boilerplate to avoid touching the boring dma chains by hand 18.16.24 Quit Rower85 (Quit: Hmmm...) 18.19.40 Join lazerbeak [0] (~lazerbeak@host86-177-188-230.range86-177.btcentralplus.com) 18.32.55 Join saratoga [0] (~saratoga@cpe-066-057-045-147.nc.res.rr.com) 18.33.38 # Where is the right place to enable logging for all hardware devices? 18.34.11 # Individual config files, the configure script? 18.34.19 # Somewhere else? 18.35.45 Quit pamaury (Remote host closed the connection) 18.37.12 Quit benedikt93 (Quit: Bye ;)) 18.38.53 Join pamaury [0] (~quassel@vit94-1-82-67-248-70.fbx.proxad.net) 18.38.54 Quit pamaury (Changing host) 18.38.54 Join pamaury [0] (~quassel@rockbox/developer/pamaury) 18.48.40 Quit saratoga (Ping timeout: 264 seconds) 19.00.31 # i would guess config.h ? 19.20.16 # I think there should be a configure option for this 19.20.38 # mgottschlag: ping 19.20.45 # pong 19.21.15 # another thing regarding the stmp3700: the pins are not the same as the imx233 and we have no complete map of it 19.21.29 # the best map we currently have is here: http://www.rockbox.org/wiki/STMP37xxPins 19.22.03 # I'm updating it everytime I find something out of my reverse engineering sessions 19.23.16 # did you see the link I gave you for the tool to run on the device ? 19.23.29 # hm, this one even isn't BGA packaged, so would be completely different probably 19.23.40 # hwemul? works great 19.23.51 # I don't have much time to play with it right now though -.- 19.24.53 Join pretty_function [0] (~sigBART@123.252.215.215) 19.24.53 # ah, you have a lqfp package ? 19.24.55 # damn 19.25.07 # it will indeed be completely different probably 19.25.39 # then it would be nice if you help filling this table based on your findings :) 19.26.19 # it is computer generated so the best way would be that you give me a list if you feel like building some 19.27.09 # which device is it ? I can't remember 19.28.15 # STMP3710, Philips SA3225/02 19.28.34 *** Saving seen data "./dancer.seen" 19.28.37 # I'll need some time to get into this, and don't expect too much usable info to come from me :p 19.29.25 # (on another note, seems that I damaged the LCD cable while repairing the battery wires, the player wasn't working at all before I did that though) 19.30.12 # so no LCD -.- 19.31.05 # seems problemati 19.31.06 # c 19.33.04 # also, if you feel like creating a wiki page like this one http://www.rockbox.org/wiki/CreativeZENXFi it would be awesome for the sake of documentation 19.33.20 # there's no hurry though :) 19.33.49 # (or see http://www.rockbox.org/wiki/CreativeZENXFi2 or http://www.rockbox.org/wiki/CreativeZENXFi3 which are more complete ones) 19.39.41 Quit lazerbeak (Ping timeout: 245 seconds) 19.59.40 Quit kugel (Remote host closed the connection) 20.08.08 Join b0hoon [0] (~quassel@078088061025.bielskobiala.vectranet.pl) 20.08.58 Join evilnick [0] (~evilnick@rockbox/staff/evilnick) 20.11.18 Join davharster [0] (~hartmand@ool-4576a15c.dyn.optonline.net) 20.11.49 Quit davharster (Client Quit) 20.14.52 # <[Saint]> mgottschlag: define "damaged the LCD", ...how badly? 20.15.30 # <[Saint]> (and, is there any other type of output device on the DAP? A piezo, an LED, etc?) 20.15.48 Join kugel [0] (~kugel@141.45.176.104) 20.15.48 Quit kugel (Changing host) 20.15.48 Join kugel [0] (~kugel@rockbox/developer/kugel) 20.32.49 Part b0hoon ("GTG. Bye.") 20.35.21 # mostly afk right now 20.36.04 # <[Saint]>: no idea, all I get is a white image 20.36.30 # I can get sound out of it though 20.37.01 # (used pamaury's tool as a basis and just copied the imx233 audio code) 20.37.15 # <[Saint]> mgottschlag: that's ok, just wondering if you could at least blink the LCD to verify you were in fact running your own code on the device. 20.37.25 # <[Saint]> But it seems like you're further forward than that. 20.45.23 Quit evilnick (Read error: Connection reset by peer) 20.45.53 Join evilnick [0] (~evilnick@rockbox/staff/evilnick) 20.46.38 Quit kugel (Read error: Connection reset by peer) 20.48.23 Quit pretty_function (Read error: Operation timed out) 20.48.51 Join kugel [0] (~kugel@141.45.176.104) 20.48.51 Quit kugel (Changing host) 20.48.51 Join kugel [0] (~kugel@rockbox/developer/kugel) 20.50.13 Quit Horscht (Quit: Verlassend) 21.05.49 Quit kugel (Remote host closed the connection) 21.08.44 Join kugel [0] (~kugel@141.45.176.104) 21.08.45 Quit kugel (Changing host) 21.08.45 Join kugel [0] (~kugel@rockbox/developer/kugel) 21.14.11 Join pretty_function [0] (~sigBART@123.252.215.215) 21.19.13 Quit kevku (Quit: KVIrc 4.2.0 Equilibrium http://www.kvirc.net/) 21.25.15 Part SrRaven 21.28.37 *** Saving seen data "./dancer.seen" 21.31.12 Join pamaury_ [0] (~quassel@vit94-1-82-67-248-70.fbx.proxad.net) 21.31.45 Join farlepet [0] (447565d8@gateway/web/freenode/ip.68.117.101.216) 21.31.52 Quit pamaury (Ping timeout: 264 seconds) 21.35.05 Quit farlepet (Client Quit) 21.36.20 Quit pretty_function (Quit: good night all) 21.38.16 Join saratoga [0] (980329b4@gateway/web/freenode/ip.152.3.41.180) 21.47.42 Quit fyre^OS (Ping timeout: 255 seconds) 21.56.42 # lebellium: ping 21.57.12 # pong 21.57.37 # how did you manage to slip a debit card into the border between the faceplate and the silver border ? 21.59.29 # http://www.anythingbutipod.com/forum/showthread.php?t=64419 here I did not use any card 22.00.23 # a knife is even thicker 22.01.53 # I did it with a knife 22.03.40 # do i just need to push the faceplate or theres something that keeps it in place and needs to be broken ? 22.05.32 # I don't remember more than what is written in the tutorial, that was 1 year ago ;) 22.06.22 # arr, thanks anyway 22.07.17 # I just remember the Q2 is bad built, it's impossible to disassemble it without damaging it a little :P 22.07.44 # then ill order a zip in the meanwhile :P 22.08.06 # i just heard that its battery life is inferior to Q2 :< 22.08.22 # much more inferior 22.08.48 # but the Q2 battery is probably bigger than the whole Zip itself ;) 22.09.11 # half ? 22.09.35 # I get 10-15hrs running time on the Zip 22.09.56 # on the Q2 you can reach 30hrs without DNSe 22.10.09 # meh, not that bad 22.11.17 # if you buy a Zip, try to get the WiseChip version, bertrik has the other version and thus the screen colors haven't been calibrated yet on my version \o/ 22.12.14 # heh i hope to work a bit on rockbox now that i get a rockboxable player 22.19.00 # well much of the work has already been done on the Zip port. That would have been better to port Rockbox on the Q2. It's a shame it died.... 22.19.40 # thanks god all the music is backed up 22.19.57 Quit n1s (Quit: Ex-Chat) 22.20.44 Join benedikt93 [0] (~benedikt9@unaffiliated/benedikt93) 22.22.10 # lebellium, I don't think there is much to calibrate (at least not that I remember) 22.22.26 # strange enough the bootloader doesn't bitch at all so the basic components are still alive 22.23.18 # bertrik: I told you several times that the colors are not what they should be! My reference is the volume bar of my theme 22.23.55 # oh, I remember one thing: perhaps the settings for red and green are swapped 22.24.19 # the thing is you don't have the WiseChip version so I assume it's hard to fix 22.24.20 # sorry, red and blue 22.26.25 # lebellium: do you remember if the glue was on the lower part of the clip ? 22.28.24 # as far as I remember the glue was not on the clip 22.29.35 # aww, the last clip is buried under something 22.29.39 Quit nosa-j (Quit: lol) 22.30.36 Join nosa-j [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 22.46.29 Join Thra11_ [0] (~thrall@87.115.107.6) 22.48.27 Quit nosa-j (Quit: lol) 22.48.52 Quit Thra11 (Ping timeout: 252 seconds) 22.56.34 Join nosa-j [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 22.57.52 # yay, faceplate removed. and yay for the lcd connected without a flat 23.06.21 Quit nosa-j (Quit: lol) 23.07.04 Join nosa-j [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 23.08.47 # fine 23.09.01 # is sth broken? 23.12.10 # huh, i call my ERRORF code from inside a codec and it compile and links just fine, but the entries never get written to disk 23.12.23 # but the ones elsewhere in /apps work fine 23.12.35 Quit nosa-j (Quit: lol) 23.12.36 # is there something special about how codecs are linked that i'm likely forgetting? 23.14.34 # I can't think of any 23.14.34 Join nosa-j [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 23.15.16 # maybe something didn't get recompiled right and the ABI is incompatible without you realising it? 23.16.30 # huh there it goes 23.16.32 # yeah maybe 23.16.37 # i didn't change much and now its owrking 23.16.51 # E [codec_run](MPA) testing error logging! 23.16.52 # lebellium: nop, ill try remounting it now, plugging the tpad flat again is a pain 23.16.53 # nice 23.17.02 # ok this is far enough along to push to gerrit 23.17.43 # saratoga, some thoughts on the logger: do we have some kind of recursion protection (like if we can't write to the log and we try to log that)? 23.18.15 # the log code itself never logs its own status 23.18.19 # so i think that should be safe? 23.18.26 # and also, will logging still work if the volume that we log on is mounted over USB? 23.18.29 # TheLemonMan: If I remember well I had some issues with the screen and touchpad after remounting, there is a right order to connect them or something like that.... 23.19.06 # saratoga: I was thinking that with some work we should be able to separate the logging bit (i.e. the bit that gets log messages and stores them in the buffer) and the output bit. That would allow things like switching off the disk logging and enabling logging over USB if we happen to need that 23.19.10 Quit nosa-j (Quit: lol) 23.19.47 # bertrik: if you mount USB, i don't think the callback will trigger 23.20.01 # i'm trusting on rockbox to do the right thing and not call the ATA callbacks when the disk isn't available 23.20.02 # Is the file kept open? 23.20.04 # gevaerts, like having different "appenders" like in log4j? :D 23.20.12 # so i think you can use logging and it'll flush the next time the disk is mounted 23.20.25 # gevaerts, no 23.20.26 # no the file is closed everytime 23.20.30 # ok 23.20.37 # so yeah i think this should be USB safe even 23.20.51 # but yes, the current code just has a flush_buffer callback 23.20.57 # you could make that do anything you wanted 23.21.05 Join nosa-j [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 23.21.14 # right now its just an open, write, close, but in theory it could use jtag or msc or whatever 23.21.46 # this whole thing is stupidly easy 23.22.00 # i spent more time trying to remember how to parse strings in c then figuring out how to make it work with rockbox 23.22.06 # well often simple == good :D 23.22.24 # bertrik: if you don't look at the details, yes :) 23.22.47 # so i took some advice and configured my editor to strip out trailing white space, but thats creating a lot of extra commit lines when i edit files 23.22.52 # should i not be doing that? 23.23.25 # That's a tricky one 23.23.52 # I prefer white space changes as a separate big patch, but I don't mind a few 23.24.11 # ok 23.24.24 # they're mostly files i edited in the first place, so this is probably just me fixing my own mistakes 23.25.06 Quit nosa-j (Quit: lol) 23.25.30 # yeah, I prefer to keep files without functional changes out of a patch 23.26.35 Join nosa-j [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 23.27.02 # The big advantage of having whitespace fixes in separate commits is that if you look at the git blame output and then at the commit message, it's immediately clear that you need to move to the next one 23.27.58 # ah, there's the risk you get blamed for someone else's bug if you change their whitespace! :) 23.28.39 *** Saving seen data "./dancer.seen" 23.29.33 # That's one way of explaining it :) 23.30.35 # hmm i fucked up that to gerrit 23.30.37 # Seriously though, I tend to use blame fairly often, and not having to study the actual patch to see you have to skip a commit is very nice 23.30.41 # i think i did a commit instead of an amend 23.32.05 # You can fix that (although the "wrong" one will remain on gerrit), but I'm not sure of the details 23.34.26 # It involves git reset to "uncommit" the latest commit locally after which you can commit --amend the changes. The arguments to give to git reset still appear obscure and mystical to me though 23.34.26 # this fucking bitch dies after some seconds after boot 23.34.39 Quit Xerion (Quit: ) 23.42.54 Join evilnick| [0] (~evilnick@rockbox/staff/evilnick) 23.45.04 Quit evilnick (Ping timeout: 264 seconds) 23.47.05 Join nosa [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 23.50.35 Join nosa-j- [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 23.50.43 Quit linuxstb (Quit: This computer has gone to sleep) 23.50.46 Quit nosa-j (Ping timeout: 265 seconds) 23.50.47 Nick nosa-j- is now known as nosa-j (~m00k@adsl-74-235-42-117.clt.bellsouth.net) 23.51.52 Quit nosa (Ping timeout: 246 seconds) 23.54.55 Quit nosa-j (Quit: lol) 23.56.21 Quit Guest16919 (Read error: Connection reset by peer) 23.57.05 Join nosa-j [0] (~m00k@adsl-74-235-42-117.clt.bellsouth.net)