--- Log for 11.10.112 Server: leguin.freenode.net Channel: #rockbox --- Nick: logbot_ Version: Dancer V4.16 Started: 1 month and 12 days ago 00.00.02 # the sansa ui is almost unusable next to rockbox 00.00.46 # the main problem is that developing gesture recognition is akward with the current system where you need to upload a new firmware for every change 00.00.55 Join sciopath [0] (~sciopath@yer91-2-82-237-54-159.fbx.proxad.net) 00.01.08 # the only solution would be to export it as a HID device and use the simulator with it but it's quite a bit of work 00.02.46 # ya 00.17.45 Quit bertrik (Remote host closed the connection) 00.28.25 # pamaury, would you have to right the simulator? 00.28.42 # I don't think it has fallen over 00.29.38 # gevaerts, lamens term? 00.30.17 # laymens* 00.30.20 # you mean write ? 00.30.29 # we already have one 00.30.29 # yes 00.30.47 # hmm 00.32.30 # so where does the work come in? 00.32.49 # actually coding it via simulator? 00.33.08 # Man Programming is so complicated 00.33.12 # programming* 00.33.45 Join [Saint_] [0] (~quassel@rockbox/user/saint) 00.34.02 Quit [Saint] (Ping timeout: 246 seconds) 00.34.19 # the work is: 1) export the touchpad through HID (1a figure out the correct HID desc, 2a implement it), 2) hack the simulator to use it (not trivial) 00.36.05 # pamaury, if I wanted to learn programming for rockbox where should I start? 00.37.26 Join Scromple [0] (~Simon@161.43.73.67) 00.37.27 # it really depends on what you want to achieve, for the touchpad I'm sorry to say that this sounds like a huge task if you don't know system programming, usb, hid and so on. The best place to start learning about rockbox might be to write a plugin though 00.37.36 Join Provel [0] (~Provel@75-132-15-43.dhcp.stls.mo.charter.com) 00.38.57 # :( 00.38.58 # k 00.40.10 # I can try to write it for you so you "just" have to write the gesture analysis. You can also play with the simulator 00.41.02 # ok, where do I start learning about programing the gestures? 00.42.12 # well, for rockbox nowhere because it's doesn't really exist in a way which you can easily hack; in general I don't really know, the best place would be to see how android or linux does it for example, look on the internet, etc 00.46.58 # the principle is always the same though: you track the finger position N times per second and at some point you have to decide that it was a gesture and which 00.47.47 # and of course you have to map this action to the rockbox input at the end 00.47.56 Quit ender1 (Read error: Connection reset by peer) 00.49.13 # How complicated is writing a gesture? Do you have to specify it exactly (ie exact position of finger at exact time) in code? 00.50.12 # no you can't because it will never be exact, that's why it's not so easy 00.51.38 # it would more be something like a set of points to which you have to be close but you also have to take into account possible translations; honestly I don't know how it's usually done 00.51.49 # So you have to write it dynamically? D: 00.52.10 Join ender` [0] (krneki@foo.eternallybored.org) 00.53.27 # let's pick an example: a horizontal line. One way of doing it would be to accumulate all the points from finger to release (with a certain timeout) and see if it's more or less a line (ie distance from left most point to right most >= constant and distance from bottom most to top most <= constant) 00.53.41 # *finger press to release 00.54.41 # but that's really naive because you go left right left right with you're finger and it would make no difference, so there a dynamic aspect which you have to take into account if you want something good 00.57.34 # true 00.58.53 # the good point is: you can easily hack something with you mouse in, say, a SDL program: create a window, monitor the mouse location when the button is pressed and have fun 01.02.13 Quit speckmade1 (Ping timeout: 244 seconds) 01.02.32 Quit prof_wolfff (Ping timeout: 246 seconds) 01.03.51 # http://www.codeproject.com/Articles/319401/Simple-Gestures-on-Android 01.03.58 # I need to read that later 01.04.40 Quit gevaerts (Ping timeout: 246 seconds) 01.06.18 Quit evilnick (Ping timeout: 272 seconds) 01.07.08 Join speckmade [0] (~fnerd@port-92-201-233-127.dynamic.qsc.de) 01.07.45 # http://stackoverflow.com/questions/2393553/simple-circular-gesture-detection 01.07.46 # That too 01.08.03 Quit ender` (Quit: The whole principle is wrong; it's like demanding that grown men live on skim milk because the baby can't eat steak. -- Robert A. Heinlein on Censorship (from The Man Who Sold the Moon)) 01.08.19 # I still need to learn C/Rockbox though 01.30.15 Quit Rower85 (Read error: Connection reset by peer) 01.39.33 Quit speckmade (Quit: Leaving.) 01.52.58 Join speckmade [0] (~fnerd@port-92-201-233-127.dynamic.qsc.de) 01.56.04 Join chattr [0] (~mike@70-119-47-146.res.bhn.net) 01.56.14 Part chattr ("gone") 01.57.46 *** Saving seen data "./dancer.seen" 02.02.05 Quit speckmade (Ping timeout: 246 seconds) 02.03.38 Quit pamaury (Ping timeout: 246 seconds) 02.08.38 Join speckmade [0] (~fnerd@port-92-201-233-127.dynamic.qsc.de) 02.10.12 Quit eckoit (Quit: eckoit) 02.23.51 Join tjb0607 [0] (~tjb0607@208.100.172.134) 02.32.32 Nick [Saint_] is now known as [Saint] (~quassel@rockbox/user/saint) 02.32.32 Quit mgottschlag (Ping timeout: 240 seconds) 02.35.14 Join bjdyh [0] (~420ba7a3@www.haxx.se) 02.39.14 Quit ps-auxw (Remote host closed the connection) 02.39.32 Join ps-auxw [0] (~arneb@2001:470:c807:0:1532:4e5f:2ad3:4123) 02.39.34 Join eckoit [0] (~ryan@d173-181-73-93.abhsia.telus.net) 03.01.37 Join [Saint_] [0] (~quassel@rockbox/user/saint) 03.02.52 Quit [Saint] (Ping timeout: 260 seconds) 03.09.03 Join gevaerts [0] (~fg@rockbox/developer/gevaerts) 03.18.00 Quit Horscht (Quit: Verlassend) 03.19.18 Quit thegeek (Read error: Connection reset by peer) 03.21.50 Join Horscht [0] (~Horscht@p54947354.dip.t-dialin.net) 03.21.51 Quit Horscht (Changing host) 03.21.51 Join Horscht [0] (~Horscht@xbmc/user/horscht) 03.27.25 Quit eckoit (Quit: eckoit) 03.34.24 Quit dfkt (Quit: -= SysReset 2.55=- Sic gorgiamus allos subjectatos nunc.) 03.57.48 *** Saving seen data "./dancer.seen" 03.58.50 Quit bjdyh (Quit: CGI:IRC (Ping timeout)) 04.00.07 Join eckoit [0] (~ryan@50.65.10.24) 04.08.20 Quit Jack87 (Ping timeout: 245 seconds) 04.11.29 Join speckmade1 [0] (~fnerd@port-92-201-233-127.dynamic.qsc.de) 04.11.37 Quit speckmade (Quit: Leaving.) 04.16.30 Join Jack87 [0] (Jack87@nasadmin/admin/jack87) 04.24.39 Quit Horscht (Quit: Verlassend) 04.30.10 Join TheSphinX^ [0] (~briehl@p579CC2DE.dip.t-dialin.net) 04.30.53 Nick [Saint_] is now known as [Saint] (~quassel@rockbox/user/saint) 04.33.34 Quit zz_TheSphinX^ (Ping timeout: 252 seconds) 04.41.03 Quit amiconn (Disconnected by services) 04.41.03 Join amiconn_ [0] (quassel@rockbox/developer/amiconn) 04.41.03 Quit pixelma (Disconnected by services) 04.41.04 Join pixelma_ [0] (pixelma@rockbox/staff/pixelma) 04.41.06 Nick pixelma_ is now known as pixelma (pixelma@rockbox/staff/pixelma) 04.41.09 Nick amiconn_ is now known as amiconn (quassel@rockbox/developer/amiconn) 04.49.08 Quit speckmade1 (Ping timeout: 276 seconds) 05.01.40 Join Rower85 [0] (husvagn@82.196.99.90) 05.04.47 Join Totalled [0] (~Totalled@c-98-245-9-211.hsd1.co.comcast.net) 05.20.54 Quit zchs (Remote host closed the connection) 05.26.44 Join zchs [0] (~zchs@ool-ad02eb3f.dyn.optonline.net) 05.31.42 Quit [7] (Disconnected by services) 05.31.50 Join TheSeven [0] (~quassel@rockbox/developer/TheSeven) 05.57.52 *** Saving seen data "./dancer.seen" 06.14.43 Join Keripo [0] (~Keripo@c-76-22-63-234.hsd1.wa.comcast.net) 07.09.10 Quit wutzi (Quit: Leaving) 07.18.05 Quit Wardo (Read error: Connection reset by peer) 07.40.22 Quit Epicanis (Quit: past my bedtime) 07.57.56 *** Saving seen data "./dancer.seen" 08.05.11 Join kevku [0] (x@indeed.tastes.like.everything.mm.am) 08.16.12 Quit nosa-j (Ping timeout: 246 seconds) 08.17.55 Join nosa-j [0] (~m00k@184.76.254.130) 08.18.39 Join mortalis [0] (~mortalis@195.34.194.126.kalibroao.ru) 08.36.13 Join wodz [0] (~wodz@89-76-32-53.dynamic.chello.pl) 08.37.28 # \o/ Found out why fft, oscilloscope and vu_meter didn't get signal. Now just have to think how to fix it cleanly 08.38.09 # wghatcha working on? 08.40.48 # g#326 08.40.50 # 3Gerrit review #326 at http://gerrit.rockbox.org/r/326 : ELF loader for plugins by Marcin Bukat (changes/26/326/7) 08.42.15 Join ender` [0] (krneki@foo.eternallybored.org) 08.42.23 Join thegeek [0] (~thegeek@171.17.9.46.customer.cdi.no) 08.50.29 Join XavierGr [0] (~xavier@rockbox/staff/XavierGr) 08.51.45 Join Zagor [0] (~bjst@sestofw01.enea.se) 08.51.45 Quit Zagor (Changing host) 08.51.45 Join Zagor [242] (~bjst@rockbox/developer/Zagor) 09.01.11 Quit KiwiCam (Remote host closed the connection) 09.12.54 Join einhirn [0] (~Miranda@bsod.rz.tu-clausthal.de) 09.15.31 Quit perrikwp (Read error: Connection reset by peer) 09.26.38 Nick Jack87 is now known as Jack87|Away (Jack87@nasadmin/admin/jack87) 09.29.11 Join Buschel [0] (~chatzilla@p57905630.dip.t-dialin.net) 09.34.30 Join petur [0] (~petur@rockbox/developer/petur) 09.37.52 Join KiwiCam [0] (~quassel@101.98.171.48) 09.39.07 Quit wodz (Quit: Leaving) 09.51.26 Quit Scromple (Ping timeout: 240 seconds) 09.55.16 Join lebellium [0] (~chatzilla@e179071120.adsl.alicedsl.de) 09.58.00 *** Saving seen data "./dancer.seen" 09.58.52 Quit factor (Read error: Connection reset by peer) 10.05.43 Join LinusN [0] (~linus@giant.haxx.se) 10.15.45 Join factor [0] (~factor@74.196.97.204) 10.15.50 Join Horscht [0] (~Horscht@p5490DA46.dip.t-dialin.net) 10.15.51 Quit Horscht (Changing host) 10.15.51 Join Horscht [0] (~Horscht@xbmc/user/horscht) 10.22.33 Join maruk [0] (~papier@titanium.v6.sdv.fr) 10.22.58 Join minouch [0] (~d590c461@www.haxx.se) 10.23.27 Quit mc2739 (Ping timeout: 246 seconds) 10.24.10 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 10.33.22 Quit linuxstb (Quit: This computer has gone to sleep) 10.34.14 Join mgottschlag [0] (~quassel@reactos/tester/phoenix64) 10.36.21 Join wodz [0] (~wodz@iwl138.internetdsl.tpnet.pl) 10.38.43 # n1s: good catch! 11.00.52 Quit mgottschlag (Read error: Connection reset by peer) 11.07.50 Join mgottschlag [0] (~quassel@reactos/tester/phoenix64) 11.07.59 Join linuxstb [0] (~linuxstb@46-65-38-42.zone16.bethere.co.uk) 11.09.10 # wodz: great work! 11.09.32 # wodz: imageviewer uses the load_code() api, if you manage to hide the elf loading behind that it should Just Work 11.09.56 # kugel: yeah I know, I just didnt bother yet 11.16.48 Quit mgottschlag (Remote host closed the connection) 11.25.17 # Torne: I would be great If you find out the time to review the code 11.26.46 # Yeah, i know, but i just don't have a lot of time for this stuff lately, sorry :/ 11.26.56 # i will try and look this weekend 11.28.36 Join mgottschlag [0] (~quassel@reactos/tester/phoenix64) 11.39.52 Quit mgottschlag (Read error: Connection reset by peer) 11.40.57 Join pamaury [0] (~quassel@vit94-1-82-67-248-70.fbx.proxad.net) 11.40.57 Quit pamaury (Changing host) 11.40.57 Join pamaury [0] (~quassel@rockbox/developer/pamaury) 11.41.58 Quit mystica555 (Read error: Connection reset by peer) 11.48.09 Join mgottschlag [0] (~quassel@reactos/tester/phoenix64) 11.50.53 Quit bluebrother (Disconnected by services) 11.50.57 Join bluebrother^ [0] (~dom@rockbox/developer/bluebrother) 11.53.35 Quit fs-bluebot (Ping timeout: 256 seconds) 11.53.38 Join Paretsky [0] (paretsky@2604:180::fac8:3ac2) 11.54.56 Join fs-bluebot [0] (~fs-bluebo@g231120196.adsl.alicedsl.de) 11.58.02 *** Saving seen data "./dancer.seen" 11.58.29 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 11.58.29 Quit mystica555 (Excess Flood) 11.58.48 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 11.58.48 Quit mystica555 (Excess Flood) 11.59.06 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 11.59.07 Quit mystica555 (Excess Flood) 11.59.26 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 11.59.26 Quit mystica555 (Excess Flood) 11.59.45 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 11.59.45 Quit mystica555 (Excess Flood) 12.00.04 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.00.05 Quit mystica555 (Excess Flood) 12.00.26 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.00.26 Quit mystica555 (Excess Flood) 12.00.45 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.00.46 Quit mystica555 (Excess Flood) 12.01.07 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.01.07 Quit mystica555 (Excess Flood) 12.01.27 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.01.28 Quit mystica555 (Excess Flood) 12.01.47 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.01.48 Quit mystica555 (Excess Flood) 12.02.07 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.02.07 Quit mystica555 (Excess Flood) 12.02.26 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.02.26 Quit mystica555 (Excess Flood) 12.02.45 Join mystica555 [0] (~Mike@75-166-107-42.hlrn.qwest.net) 12.02.45 Quit mystica555 (Excess Flood) 12.06.09 Quit mgottschlag (Ping timeout: 244 seconds) 12.08.40 # which targets use thumb builds? 12.33.22 Join T44 [0] (Topy44@f049013113.adsl.alicedsl.de) 12.37.09 Quit Topy (Ping timeout: 246 seconds) 12.41.34 Join mgottschlag [0] (~quassel@reactos/tester/phoenix64) 12.58.09 # clipv1 and maybe c200v2/m200v4 12.58.49 # yeah, only those 3 targets 13.05.12 # n1s: another 0.4 MHz on pp -> http://pastie.org/5034512 (reorder code a bit and introduces a new macro for multiply-add used in fft)) 13.06.03 # it changes output again, but only show +/- differences to the output w/o this change 13.06.08 # +/-1 13.15.31 Quit petur (Quit: *plop*) 13.34.31 Quit Buschel (Ping timeout: 252 seconds) 13.48.46 Join the-kyle1 [0] (~kyle@cpe-024-211-185-030.nc.res.rr.com) 13.48.48 Quit the-kyle (Read error: Connection reset by peer) 13.49.44 Quit bootlfdhfrsa (Ping timeout: 246 seconds) 13.57.23 Quit kugel (Remote host closed the connection) 13.58.06 *** Saving seen data "./dancer.seen" 14.17.49 Join amayer_ [0] (~alex@mail.weberadvertising.com) 14.17.49 Quit amayer_ (Remote host closed the connection) 14.18.10 Join amayer_ [0] (~alex@mail.weberadvertising.com) 14.21.54 Quit Keripo (Quit: Leaving.) 14.24.19 Quit Jack87|Away (Ping timeout: 256 seconds) 14.27.29 Quit wodz (Quit: Leaving) 14.36.08 Join WalkGood [0] (~4@unaffiliated/walkgood) 14.48.42 Quit factor (Quit: Leaving) 15.00.30 Join evilnick_ [0] (~evilnick@d54C37BF3.access.telenet.be) 15.02.51 Quit ender` (Read error: Operation timed out) 15.06.01 Join Jack87 [0] (Jack87@nasadmin/admin/jack87) 15.19.02 Join lifeless__ [0] (~lifeless@94.51.202.254) 15.20.36 Quit lifeless_ (Ping timeout: 246 seconds) 15.23.08 Quit mc2739 (Ping timeout: 260 seconds) 15.24.40 Join mc2739 [0] (~mc2739@rockbox/developer/mc2739) 15.35.15 Quit Paretsky (Quit: See you.) 15.36.28 Join Paretsky [0] (paretsky@2604:180::fac8:3ac2) 15.49.00 Quit mortalis (Quit: Leaving) 15.58.07 *** Saving seen data "./dancer.seen" 16.21.47 Join Buschel [0] (~chatzilla@p57905630.dip.t-dialin.net) 16.51.48 Join lasser [0] (~f@pD95711F1.dip0.t-ipconnect.de) 17.00.45 Quit Buschel (Ping timeout: 255 seconds) 17.03.25 Join lorenzo92 [0] (~chatzilla@95.237.108.76) 17.04.47 Join ender` [0] (krneki@foo.eternallybored.org) 17.06.23 # Hi! I have a question regarding compile of rockbox for h300. Since weeks I got an error at the end:LD rockboy.rock 17.06.23 # ERROR: Error opening file: /Filme/Rockbox/GIT/rockbox/fonts//.rockbox/fonts/12-Adobe-Helvetica.bdf 17.07.26 Join y4n [0] (~y4n@unaffiliated/y4ndexx) 17.08.08 # '12-Adobe-Helvetica-Bold.bdf' exists in /Filme/Rockbox/GIT/rockbox/fonts/ 17.08.17 # What's happening there? 17.09.14 # uhm this double // 17.09.39 # lasser: do you have any local changes? 17.09.44 # have you tried a clean build? 17.09.49 # looks like the path includes the build dir 17.09.52 # can you paste the entire log of the build into a pastebin 17.09.52 Quit WalkGood () 17.10.38 # I don't think the build stops on that 17.10.51 # also, the error message has ".rockbox" while the path after has "rockbox" without the dot prefix 17.11.00 # I've seen the same thing with the 3.12 release builds. The resulting zip seems to be fine 17.11.14 # I suspect this started with kugel's wpsbuild rewrite 17.11.40 # Torne: no local changes, it is a clean build. build log was too long fo rmy xterm ;-) 17.11.48 # uhm, I should read more carefully... 17.12.23 # lasser: is the build still succeeding? 17.12.39 Quit minouch (Quit: CGI:IRC) 17.12.52 # gevaerts: you're right, the build does not stop, make zip creates rockbox.zip 17.13.09 # ok, then just ignore it :) 17.13.12 # but we should work out why and fix it 17.13.18 # because things that look like errors but aren't are bad. 17.13.59 # * gevaerts agrees 17.14.16 # There's also a weird message when building iaudio m3 17.14.23 # again from wpsbuild 17.14.35 # Ok, so I don't mind any longer about that. Thank you! 17.17.27 # related to rwps targets perhaps? 17.18.32 # what good value player would you all reccomend for rockbox? I was thinking about getting a sansa clip+ or a clip zip 17.22.48 # those are pretty good if they ahve enough storage for you 17.22.56 # and you don't want a bigger screen for anything. 17.23.25 Join Buschel [0] (~chatzilla@p57905630.dip.t-dialin.net) 17.25.52 # :D 17.26.22 # looks to me like microsd cards are cheap enough it would be cheaper to extend a player like that with a card than a bigger player model from the start 17.27.00 # i've been using this fuze v2 for the last few years, i'm amazed how well its held together, finally the battery is starting to give out just after so much use 17.29.34 # I'm amazed people are sitll using dedicated players to be honest. 17.32.39 # yea, i'm too stubborn to enter the smartphone era 17.33.10 # dedicated players still have their place. especially tiny ones like the clips. 17.33.50 # GodEater: i still use my ipodvideo on long trips 17.34.02 # because it has an independant battery and can hold a very large chunk of my collection 17.34.09 # indeed Zagor, one of the best parts i like about a dedicated small player is that i feel comfortable just leaving them in my car in the sun without worrying about the device 17.34.11 # but i rarely turn it on when i'm not on a plane 17.35.28 # yes, indeed I also use my great yp-r0 instead of the phone...generally it's better because that memory is dedicated for the music only and sound quality is better, altough my nexus sound good :) 17.36.39 Quit Zagor (Quit: Clint excited) 17.39.29 Quit einhirn (Quit: Miranda IM! Smaller, Faster, Easier. http://miranda-im.org) 17.39.36 # I liked my ipod classic because it could hook into my car stereo. 17.39.38 # if someone is working on getting the apple protocal working in rockbox i would like to help so i can have that feature back 17.40.50 Join n1s [0] (~n1s@rockbox/developer/n1s) 17.44.21 # I imagine the batteries in mine are all fucked now through lack of use 17.50.20 Quit linuxstb (Quit: This computer has gone to sleep) 17.54.40 Join sciopat [0] (~sciopath@yer91-2-82-237-54-159.fbx.proxad.net) 17.56.50 Quit sciopath (Ping timeout: 246 seconds) 17.58.11 *** Saving seen data "./dancer.seen" 17.58.38 Join linuxstb [0] (~linuxstb@46-65-38-42.zone16.bethere.co.uk) 17.59.21 Join wodz [0] (~wodz@89-76-32-53.dynamic.chello.pl) 18.00.22 # Finally found the bug :-) Now every plugin (except imageviewer just because it is not converted yet to new loader) work as expected on PP. 18.15.08 Quit thegeek (Read error: Connection reset by peer) 18.16.46 Quit Buschel (Ping timeout: 240 seconds) 18.17.36 Join thegeek [0] (~thegeek@171.17.9.46.customer.cdi.no) 18.17.42 Quit wodz (Quit: Leaving) 18.19.04 Quit user890104 (Read error: Operation timed out) 18.21.14 Join user890104 [0] (Venci@195.189.80.95) 18.35.26 Join Buschel [0] (~chatzilla@p57905630.dip.t-dialin.net) 18.43.33 Join speckmade [0] (~fnerd@port-92-201-30-66.dynamic.qsc.de) 18.43.48 Quit linuxstb (Quit: This computer has gone to sleep) 18.44.56 Quit speckmade (Client Quit) 18.45.22 Join speckmade [0] (~fnerd@port-92-201-30-66.dynamic.qsc.de) 18.49.06 Join speckmade1 [0] (~fnerd@port-92-201-30-66.dynamic.qsc.de) 18.49.06 Quit speckmade (Read error: Connection reset by peer) 18.52.34 Quit maruk (Quit: Leaving.) 18.59.40 Quit lorenzo92 (Quit: ChatZilla 0.9.89 [Firefox 16.0/20121006022900]) 19.01.01 Quit Horscht (Quit: Verlassend) 19.04.10 Join bootljhfdsds [0] (~Prmhfhfx@178.16.4.57) 19.04.51 Quit lasser () 19.11.04 Join pretty_function [0] (~sigBART@123.252.213.153) 19.16.46 # http://www.youtube.com/watch?v=7tyExKyBQ-w <-- Hitler receives ipods instead of sansas he can rockbox 19.30.19 Quit Xerion (Quit: ) 19.34.59 # i also get the helvetica 12 error when making zip for h300 19.35.44 # it turned up after checking out rb after the opus push, my previous pull was 4 months old at that point though :> 19.38.52 Join bertrik [0] (~quassel@rockbox/developer/bertrik) 19.40.56 # don't seem to get it for other builds, weird 19.42.04 # even the fuze that uses the same font for cabbiev2 19.44.49 Quit speckmade1 (Ping timeout: 260 seconds) 19.52.07 Join Wardo [0] (~Mirandaha@176-120-190-109.dsl.ovh.fr) 19.52.50 # ah, copythemefont is called twice for the h300 once with just the filename and a second time with the /.rockbox path so i guess it's remote related 19.53.06 # on the fuze build it's called just once with the filename 19.54.09 # yeah, the error is in the logs from the autobuilder too, for some reason they're not detected though 19.55.18 # Ah, indeed 19.55.28 # The iaudio m3 log says "cp: cannot stat `/home/robert/rb/backdrops/cabbiev2.128x96x2.bmp': No such file or directory" 19.55.36 # While you're at it ;) 19.55.53 # being fairly perl illiterate i'm not sure i can fix it 19.56.25 # i don't understand the code calling copythemefont but it looks like the cause to me 19.57.25 # looks wrong anyway 19.57.31 # Yes, I get that too when I look at perl code 19.58.15 *** Saving seen data "./dancer.seen" 19.58.27 Join speckmade [0] (~fnerd@port-92-201-30-66.dynamic.qsc.de) 20.00.52 # ah, yes changing it to copythemefont($i); works in that it copies both the fonts to the zip and gets rid of the error, the theme.cfg still has the wrong path though 20.03.59 # found the fix for that too 20.05.32 # g#331 20.05.34 # 3Gerrit review #331 at http://gerrit.rockbox.org/r/331 : wpsbuild: fix copying of remote font by Nils Wallménius (changes/31/331/1) 20.09.04 # what is the point of having $i after the function call? 20.09.06 # (see line 3,4 and 9,10 of the paste) 20.09.20 # gevaerts: did you compare to other iaudio remote targets builds? IIRC the remote theme doesn't have a backdrop for the menus (so it really isn't there in backdrops) but from the error message it looks like one is expected for targets with grey or color main screen 20.09.55 # and the m3 uses the remote screen as main screen or so 20.09.57 # pixelma: I didn't actually run anything, but the M3 is the only target that gives that particular error 20.10.13 # Well, the only *stable* target 20.13.33 # if im reading it right $i will get reset the next iteration of the loop, so $i isnt used. 20.13.35 # can i get a second opinion on this to verify(either way) that im not going crazy 20.14.33 Join speckmade1 [0] (~fnerd@port-92-201-30-66.dynamic.qsc.de) 20.14.37 Join prof_wolfff [0] (~prof_wolf@213.37.219.103.dyn.user.ono.com) 20.14.58 # http://paste.debian.net/199130/ 20.15.00 # that goes with my last 2 messages 20.15.08 # sorry(forgot to paste link) 20.15.38 Quit speckmade (Ping timeout: 252 seconds) 20.22.26 Quit speckmade1 (Ping timeout: 265 seconds) 20.29.20 Join speckmade [0] (~fnerd@port-92-201-30-66.dynamic.qsc.de) 20.29.46 # amayer_: i said i dodn't understand it, possibly the real fix would be my first change and just deleting the second line 20.30.51 # indeed 20.31.40 Quit Buschel (Quit: ChatZilla 0.9.89 [Firefox 15.0.1/20120905151427]) 20.31.47 # no wait, it 's not right 20.31.49 # im pretty sure the line: 20.31.51 # $i = "$rbdir/fonts/$i"; 20.31.53 # does apsolutely nothing seeing as "foreach my $i" resets $i the very next step before $i is even read by anything 20.32.21 # yeah that's what would make sense 20.32.52 # should $i = "$rbdir/fonts/$i"; be before the copythemefont($i) ? 20.33.03 # probably 20.33.14 # i dont have a build setup here(at work) 20.33.26 # so i cant test any theorys i have 20.35.01 # n1s: did you test it with the $i = before the function call? 20.35.57 # yeah, that screws up the path 20.36.09 # well then you can thow that line away 20.37.02 # same with the loop above it: 20.37.04 # copythemeicon($i); 20.37.06 # $i = "$rbdir/$i"; <-- to delete 20.38.15 # yeah that fixes the copying but the paths in the cfg are then broken, it seems $font and $remotefont need to have the path prepended but i'm not sure how to do tht nicely 20.39.20 Quit eckoit (Quit: eckoit) 20.40.11 # you said its just messed up in the config file? the font actally gets coppied? 20.40.50 # yeah, with that (or my previous attempt the copying works 20.41.09 # what does it output in the config file and what do you want it to say? 20.41.26 # the cfg ends up with just the filenames but it seems to work anyway, i'm not too familiar with the config code 20.42.05 # im pretty sure the config file just needs the font name. it already looks in /.rockbox/fonts 20.42.14 # did you test to see if the config file works? 20.42.44 Join lebellium_ [0] (~chatzilla@e179071120.adsl.alicedsl.de) 20.42.49 # i think it does but i dunno if this might be needed in some case 20.43.56 Join Xerion [0] (~xerion@5419F5F4.cm-5-2d.dynamic.ziggo.nl) 20.44.13 # well if you need the whole path in the config file(not sure you do) 20.44.16 # you would change line 295 to: 20.44.16 Quit lebellium (Ping timeout: 245 seconds) 20.44.18 # push @out, "font: /.rockbox/fonts/$font\n" if (defined($font)); 20.44.24 Nick lebellium_ is now known as lebellium (~chatzilla@e179071120.adsl.alicedsl.de) 20.44.28 # im reading the manual to see which it expects 20.44.32 # yeah, and the remotefont one 20.45.50 # all the other paths are absolute in the theme cfg's that's what made me think this 20.47.20 # did you get the code for line 303? the remote font? 20.48.13 # http://www.rockbox.org/wiki/CustomConfigFile says font needs the full path 20.48.34 # changing these don't follow the style though and the changing of $i is done that way in other places i see so perhaps $i is a reference and actually changes the $font and $remotefont vars? 20.49.03 # $i is just a tmp var for the loop 20.51.46 # n1s: that is kinda tricky 20.53.54 Join eckoit [0] (~ryan@96.53.108.182) 20.54.02 # *just* removing the line setting $i does change the path in the cfg so i think it's a reference 20.55.02 # hmm... interesting 20.55.38 # i thought you said it doesnt output the full path 20.56.12 # yeah i got confused so in fact my original patch at least seems to be the proper fix 20.56.43 # n1s: yeah it would work 20.57.04 # so i'll leave that for kugel whenever he turns up 20.59.04 Quit KiwiCam (Remote host closed the connection) 21.00.45 # n1s: if you use an explicit variable it acts as a pointer to the variable in the list(aka $font and $remotefont). if you use $_ then its not a pointer but rather just a value. 21.00.48 # pretty interesting. i never knew about this behavior in perl before 21.17.47 Nick Syconaut^ is now known as Syconaut (viper@c-60fd72d5.162-1-64736c10.cust.bredbandsbolaget.se) 21.30.25 Join KiwiCam [0] (~quassel@101.98.171.48) 21.32.17 Join elfabixx [0] (59555d9a@gateway/web/freenode/ip.89.85.93.154) 21.32.22 # hi all 21.32.27 # requesting help 21.32.42 # (first, sorry for my english, i'm french) 21.32.58 # I just tried ti put some song on my SD card 21.33.10 Quit Wardo (Quit: Blarglarg) 21.33.25 # And when i unpluged it, i seen a short message containing "PANIC" 21.33.43 # I looked on the internet, seen it was a kernel panic 21.33.56 # * elfabixx 's user of linux 21.34.21 # I also seen there was a recovery mode, but uh... not sure^^^^ 21.34.48 # -^^ 21.34.52 # Which player is this? 21.35.01 # A sanza fuze 21.35.05 # v2, i think 21.35.21 # Have you tried resetting it by holding the power button for at least 30 seconds? 21.36.11 # i did ot 21.36.12 # sansa fuze is the best 21.36.14 # it* 21.36.21 # alexbobp: :) 21.36.37 # not responding at all 21.37.08 # i tried first to open it, in order to see if it was possible to uplug the battery, but it's uh... 21.37.16 # Don't open it 21.37.24 # I don't know the english word ^^ 21.37.28 # soldered? 21.37.31 # gevaerts: too late :-P 21.38.09 # well... the conectors are fixed with metal 21.38.18 # etain 21.38.19 # There is a bug that happens for some people where it crashes in such a way that the reset procedure doesn't work. In such cases, waiting a few days for the battery to run out usually helps 21.39.28 # gevaerts: i think i'll effectively wait a few days before to do anything, i oppended it, disconected the screen and pad, and reclose it 21.40.06 # If it's open anyway, and you're good at soldering, you could also disconnect the battery 21.40.26 # it's Welded 21.40.36 # thanks reverso ^^ 21.41.25 # gevaerts: ya, but i haven't my stuff here 21.41.58 # not Soldering iron. 21.42.11 # (hope this have sense) 21.44.06 # well, i have to go, thank you all ! 21.44.26 # I'll wait a few days, and if it don't work, i'll come back to you 21.44.38 # see you ! 21.44.40 # Good luck! 21.44.53 # gevaerts: thx ! 21.49.11 Quit elfabixx (Ping timeout: 245 seconds) 21.56.09 # hmm. 3.12 still not uploaded? 21.58.01 # No. I asked Zagor a few days ago, then we both forgot, and he doesn't have time tonight. We'll try tomorrow night 21.58.19 *** Saving seen data "./dancer.seen" 21.59.47 # ok. Just noticed and wondered :) 22.11.30 Part LinusN 22.12.46 Join linuxstb [0] (~linuxstb@host86-136-64-97.range86-136.btcentralplus.com) 22.29.41 Quit y4n (Quit: PÆNTS ØLF!) 22.35.40 Join kugel [0] (~kugel@141.45.176.104) 22.35.40 Quit kugel (Changing host) 22.35.40 Join kugel [0] (~kugel@rockbox/developer/kugel) 22.35.50 # forum moderators: block "npdhznghdj" 22.38.11 Quit kugel (Client Quit) 22.39.41 Quit n1s (Ping timeout: 245 seconds) 22.40.47 Join kugel [0] (~kugel@141.45.176.104) 22.40.47 Quit kugel (Changing host) 22.40.47 Join kugel [0] (~kugel@rockbox/developer/kugel) 22.44.16 Quit eckoit (Quit: eckoit) 22.45.22 Join n1s [0] (~n1s@nl118-168-30.student.uu.se) 22.45.22 Quit n1s (Changing host) 22.45.22 Join n1s [0] (~n1s@rockbox/developer/n1s) 22.55.08 Join eckoit [0] (~ryan@96.53.108.182) 23.00.21 Quit pretty_function (Ping timeout: 260 seconds) 23.05.35 Quit amayer_ (Quit: going ~/) 23.13.51 Join Horscht [0] (~Horscht@p5490DA46.dip.t-dialin.net) 23.13.52 Quit Horscht (Changing host) 23.13.52 Join Horscht [0] (~Horscht@xbmc/user/horscht) 23.16.31 # kugel: saw your comment on gerrit, did you read the patch in the right direction? 23.17.29 # it copied $font, then prepended the path to it and then tried to copy it again which failed 23.17.36 # right, oops 23.20.17 # no problem, took me a while before i could read it :) 23.21.03 # perhaps someone should check the release zips so they are fine 23.21.09 # anyway, goodnight 23.21.21 Quit n1s (Quit: Ex-Chat) 23.29.44 Join perrikwp [0] (~quassel@cpe-075-177-082-185.triad.res.rr.com) 23.35.07 Quit kevku (Quit: KVIrc 4.2.0 Equilibrium http://www.kvirc.net/) 23.37.46 Quit linuxstb (Quit: Leaving) 23.58.06 Quit pamaury (Ping timeout: 256 seconds) 23.58.23 *** Saving seen data "./dancer.seen"