--- Log for 22.12.112 Server: card.freenode.net Channel: #rockbox --- Nick: logbot Version: Dancer V4.16 Started: 18 days and 0 hours ago 00.10.14 # tomorrow I will dig into the touchpad for the other 4 directional keys! 00.10.18 Quit shamus (Read error: Connection reset by peer) 00.10.40 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 00.11.08 # pamaury: it uses adc for the x+/- and y+/- plus some gpios...these gpios are used as interrupts? I think so, do you? 00.11.44 *** Saving seen data "./dancer.seen" 00.12.10 # lorenzo92: quite possibly: gpio is used as trigger for actual conversion 00.12.58 # usually on x+/- and y+/- the hardware can do it automatically 'on imx233) (typically touch screen) but perhaps they missed this point 00.13.49 # pamaury: yes it can also the stmp36xx hehe, so I guess I could follow the standard way ignoring the fact of these gpios! 00.13.51 # lorenzo92: can you point me to the schematics ? 00.13.57 # yes! 00.16.44 Join the-kyle [0] (~kyle@cpe-024-211-185-030.nc.res.rr.com) 00.17.26 Join Elfish [0] (amba@2001:1608:12:1:13:3:3:7) 00.17.51 Quit XavierGr () 00.32.52 Quit lorenzo92 (Remote host closed the connection) 00.34.28 Quit lebellium (Quit: ChatZilla 0.9.89 [Firefox 18.0/20121212073002]) 00.36.01 # lorenzo92: the Z5 service manual block diagram documents both a touchpad and a keypad. The touchpad uses both AX/Y+/- and TX/Y+/-. I don't quite understand the use of the T* pins 00.41.29 Quit bertrik (Read error: Operation timed out) 00.41.34 Join CaptainKewl [0] (~captainke@207-237-110-248.c3-0.nyr-ubr2.nyr.ny.cable.rcn.com) 00.41.36 # lorenzo92: I might be wrong since I'm not an eletrical engineer but it seems that the T* pins come from the A* though a mosfet used as a switch. Concretely, that means that T* will be 1 only if the resistive load on A* is high enough, ie if you press hard enough on the touchpad. So it's probably simpler to use T* for simple detection but the A* interface gives you a more precise localisation of the finger 00.41.48 Join sentriz [0] (~Senan@78.143.151.93) 00.54.17 Quit eckoit (Quit: eckoit) 00.56.54 Quit shamus (Read error: Connection reset by peer) 00.57.20 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 01.00.10 Quit ender` (Quit: Swipe cards don't work because every six weeks or so security sends someone around to clean them with a dirty cleaning card and it takes a couple of swipes to get rid of the grime they deposited. -- BOFH) 01.10.29 Join [Saint] [0] (~saint@rockbox/user/saint) 01.14.15 Join TheSphinX^ [0] (~briehl@p579CC3AA.dip.t-dialin.net) 01.17.24 Quit TheSphinX_ (Ping timeout: 248 seconds) 01.22.57 Quit shamus (Read error: Connection reset by peer) 01.22.59 Quit TheSphinX^ (Ping timeout: 264 seconds) 01.23.52 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 01.25.16 Join TheSphinX^ [0] (~briehl@p5B323192.dip.t-dialin.net) 01.29.52 Quit TheSphinX^ (Read error: Operation timed out) 01.35.47 Join TheSphinX^ [0] (~briehl@p5B32351C.dip.t-dialin.net) 01.36.54 Quit pamaury (Ping timeout: 246 seconds) 01.37.15 Join SuperBrainAK [0] (~Andy@ip72-223-111-21.ph.ph.cox.net) 01.46.48 Join TheSphinX_ [0] (~briehl@p5B322B46.dip.t-dialin.net) 01.49.19 Quit TheSphinX^ (Ping timeout: 252 seconds) 01.53.18 Join TheSphinX^ [0] (~briehl@p5B32373D.dip.t-dialin.net) 01.56.19 Join TheSphin- [0] (~briehl@p5B323A9F.dip.t-dialin.net) 01.56.23 Quit TheSphinX_ (Ping timeout: 260 seconds) 01.58.36 Quit TheSphinX^ (Ping timeout: 244 seconds) 02.11.48 *** Saving seen data "./dancer.seen" 02.19.47 Quit shamus (Read error: Connection reset by peer) 02.20.00 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 02.28.33 Quit TBFOOL (Ping timeout: 240 seconds) 02.30.30 Quit shamus (Read error: Connection reset by peer) 02.30.40 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 02.39.21 Join TheSphinX^ [0] (~briehl@p5B323956.dip.t-dialin.net) 02.40.34 Quit TheSphin- (Read error: Operation timed out) 02.49.05 Quit SuperBrainAK (Ping timeout: 252 seconds) 02.52.48 Quit Horscht (Quit: Verlassend) 03.01.49 Quit Gallomimia (Ping timeout: 250 seconds) 03.02.00 Quit dfkt (Quit: -= SysReset 2.55=- Sic gorgiamus allos subjectatos nunc.) 03.26.54 Quit [Saint] (Read error: Connection reset by peer) 03.29.07 Join [Saint] [0] (~saint@rockbox/user/saint) 03.32.25 Join Gallomimia [0] (~gallo@key.cha0sgaming.net) 03.34.25 Quit [Saint] (Remote host closed the connection) 03.37.21 Join TBCOOL [0] (~tb@c-893571d5.09-42-73746f22.cust.bredbandsbolaget.se) 04.06.35 Join SuperBrainAK [0] (~Andy@ip72-223-111-21.ph.ph.cox.net) 04.11.17 Quit saratoga (Ping timeout: 245 seconds) 04.11.52 *** Saving seen data "./dancer.seen" 04.12.11 Quit sentriz (Quit: Leaving) 04.12.27 Join TheSphinX_ [0] (~briehl@p5B322CF3.dip.t-dialin.net) 04.16.38 Quit TheSphinX^ (Ping timeout: 276 seconds) 04.17.36 Quit rasher (Ping timeout: 244 seconds) 04.51.37 Quit pixelma (Disconnected by services) 04.51.38 Join pixelma_ [0] (pixelma@rockbox/staff/pixelma) 04.51.40 Nick pixelma_ is now known as pixelma (pixelma@rockbox/staff/pixelma) 04.51.43 Join amiconn_ [0] (quassel@rockbox/developer/amiconn) 04.51.43 Quit amiconn (Disconnected by services) 04.51.47 Nick amiconn_ is now known as amiconn (quassel@rockbox/developer/amiconn) 05.11.03 Quit TheSeven (Disconnected by services) 05.11.12 Join [7] [0] (~quassel@rockbox/developer/TheSeven) 05.12.25 Quit Scromple (Quit: Leaving) 05.17.56 Quit prof_wolfff (Ping timeout: 248 seconds) 05.27.41 Join [Saint] [0] (~saint@rockbox/user/saint) 05.32.32 Join TheSphinX^ [0] (~briehl@p5B32232E.dip.t-dialin.net) 05.34.21 Quit TheSphinX_ (Ping timeout: 252 seconds) 06.11.54 *** Saving seen data "./dancer.seen" 07.07.02 Quit CaptainKewl (Read error: Connection reset by peer) 07.44.55 Quit shamus (Read error: Connection reset by peer) 07.45.05 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 07.50.12 Quit Provel (Read error: Connection reset by peer) 07.53.25 Join Provel [0] (~Provel@75-132-18-44.dhcp.stls.mo.charter.com) 08.05.35 Quit [Saint] (Ping timeout: 264 seconds) 08.07.53 Quit Beta2K (Ping timeout: 264 seconds) 08.10.48 Quit shamus (Read error: Connection reset by peer) 08.11.38 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 08.11.56 *** Saving seen data "./dancer.seen" 08.28.15 Join [Saint] [0] (~saint@rockbox/user/saint) 08.36.00 Quit nateloaf (Quit: Leaving.) 08.43.49 Join melmothX [0] (~melmoth@unaffiliated/melmothx) 08.46.14 Quit [Saint] (Ping timeout: 252 seconds) 08.47.48 Join [Saint] [0] (~saint@rockbox/user/saint) 08.53.45 Join akaWolf [0] (~akaWolf@unaffiliated/akawolf) 09.19.59 Join Horscht [0] (~Horscht@xbmc/user/horscht) 09.32.04 Quit [Saint] (Ping timeout: 252 seconds) 09.49.53 Join n1s [0] (~n1s@nl118-168-30.student.uu.se) 09.49.53 Quit n1s (Changing host) 09.49.53 Join n1s [0] (~n1s@rockbox/developer/n1s) 10.05.28 Quit TheSphinX^ (Ping timeout: 246 seconds) 10.10.47 Join TheSphinX^ [0] (~briehl@p579CC881.dip.t-dialin.net) 10.11.11 Join solarcloud [0] (~solarclou@178.16.15.26) 10.11.59 *** Saving seen data "./dancer.seen" 10.26.26 Join lorenzo92 [0] (~chatzilla@host212-107-dynamic.20-79-r.retail.telecomitalia.it) 10.27.31 # pamaury (logs): good point! indeed it can be ... I will try now! 10.29.52 Join Neovanglist [0] (~Neovangli@69.31.87.218) 10.32.41 Quit SuperBrainAK (Quit: pbly going to sleep /_\) 10.33.47 Quit melmothX (Quit: bau) 10.34.09 Join melmothX [0] (~melmoth@unaffiliated/melmothx) 10.43.04 Join stoffel [0] (~quassel@pD9E4244F.dip.t-dialin.net) 10.50.13 # pamaury: uhm nothing simply polling the pins, but I've noticed TX+/TY+ are inputs while the others are outputs hum hum. I try to have a look at sdk / trial and error 10.58.54 # pamaury: argh the schematic says output near the cpu, and input near the mosfet ^^ 11.07.48 Join bertrik [0] (~quassel@rockbox/developer/bertrik) 11.07.59 Join ender` [0] (krneki@foo.eternallybored.org) 11.10.50 # pamaury: okay touchpad doesn't work even in OF, I'm missing a part indeed, seraching for it haha 11.19.15 Join Horschti [0] (~Horscht@xbmc/user/horscht) 11.22.59 Quit Horscht (Ping timeout: 265 seconds) 11.28.29 Join Rower85 [0] (husvagn@v-413-alfarv-177.bitnet.nu) 11.31.16 Join bluebrother [0] (~dom@rockbox/developer/bluebrother) 11.32.54 Quit fs-bluebot (Ping timeout: 256 seconds) 11.34.14 Join fs-bluebot [0] (~fs-bluebo@f053153174.adsl.alicedsl.de) 11.34.37 Quit bluebrother^ (Ping timeout: 256 seconds) 11.38.05 Quit Neovanglist (Quit: Lost terminal) 11.53.29 Join rasher [0] (~rasher@rockbox/developer/rasher) 12.12.03 *** Saving seen data "./dancer.seen" 12.12.45 Quit shamus (Read error: Connection reset by peer) 12.13.06 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 12.21.51 Join y4n [0] (~y4n@unaffiliated/y4ndexx) 12.38.46 Quit stoffel (Ping timeout: 246 seconds) 12.39.39 Join Topy44|2 [0] (kvirc@f049194146.adsl.alicedsl.de) 12.40.56 Nick Horschti is now known as Horscht (~Horscht@xbmc/user/horscht) 12.42.46 Quit Topy44 (Ping timeout: 255 seconds) 12.49.43 Quit dokan (Read error: Connection reset by peer) 12.51.30 Join dokan [0] (~minatani@ac250006.ppp.asahi-net.or.jp) 12.55.33 Quit lorenzo92 (Ping timeout: 252 seconds) 13.04.14 Join stoffel [0] (~quassel@pD9E4244F.dip.t-dialin.net) 13.24.35 Quit Provel (Ping timeout: 260 seconds) 13.28.20 Join prof_wolfff [0] (~prof_wolf@213.37.219.103.dyn.user.ono.com) 13.41.01 Join lorenzo92 [0] (~chatzilla@host212-109-dynamic.17-79-r.retail.telecomitalia.it) 13.42.32 Quit lorenzo92 (Client Quit) 13.42.48 Join lorenzo92 [0] (~chatzilla@host212-109-dynamic.17-79-r.retail.telecomitalia.it) 13.43.18 # pamaury: backlight is managed via an external controller, PWM3 pin is used as GPIO -> http://www.google.it/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CDIQFjAA&url=http%3A%2F%2Fpdf.datasheet.su%2Fanalogictech%2Faat3151ifp-t1.pdf&ei=zarVUJqUIMPh4QSnnoDADw&usg=AFQjCNG6nU1hThzRPPF9yWCWTgHEqzvYnA&bvm=bv.1355534169,d.Yms 13.43.27 # via AS2C... 14.12.05 *** Saving seen data "./dancer.seen" 14.15.15 Join nateloaf [0] (~nwild@S0106bcaec5c3e90e.wp.shawcable.net) 14.19.19 # okay this as2c wire interface is something proprietary, once I get it working we can then add its support to rockbox 14.19.32 # anyone knows if already implemented somewhere? 14.22.35 Part delt 14.22.40 # never heard of it ... 14.23.00 # what parts are connected through it? 14.31.00 # basically it is a backlight controller, the main pin is the EN/SET pin. first select an address using 17+ rising edges, then send data 14.36.35 Quit stoffel (Ping timeout: 265 seconds) 14.40.59 # bertrik: do you think I need to do a little pause between a high and a low? From the clock image on page 10 of the pdf I don't understand uhm 14.41.38 # Tlatency yes, I need to wait also a little more 14.44.03 Join [Saint] [0] (~saint@rockbox/user/saint) 14.44.05 # it looks vaguely familiar, perhaps have seen something similar in the meizus 14.44.56 # I think some backlight controllers have an interface where just the number of pulses set the brightness, or something like short pulse = go dimmer and long pulse = go brighter 14.45.11 # but none as advanced as this one 14.47.16 # indeed, for the moment I still need to understand some points, since the code I wrote doesn't work apparently . if schematics are correct, gpio pin is okay 14.48.56 Join stripwax [0] (~Miranda@rockbox/developer/stripwax) 14.55.08 Quit stripwax (Quit: Miranda IM! Smaller, Faster, Easier. http://miranda-im.org) 15.02.51 Join stoffel [0] (~quassel@pD9E4244F.dip.t-dialin.net) 15.04.59 Quit shamus (Read error: Connection reset by peer) 15.05.53 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 15.15.53 Join sentriz [0] (~Senan@78.143.151.93) 15.22.13 # still unable to make it work, this means I will need to reverse some code of the OF bootloader 15.26.32 Quit [Saint] (Read error: Connection reset by peer) 15.26.38 Join [Saint_] [0] (~saint@rockbox/user/saint) 15.30.11 Quit lorenzo92 (Ping timeout: 264 seconds) 15.30.47 Quit n1s (Quit: Ex-Chat) 15.42.10 Quit stoffel (Ping timeout: 260 seconds) 15.44.06 Quit sentriz (Ping timeout: 252 seconds) 15.50.31 Join dfkt [0] (dfkt@unaffiliated/dfkt) 16.12.06 *** Saving seen data "./dancer.seen" 16.14.09 Quit shamus (Read error: Connection reset by peer) 16.14.16 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 16.17.16 Join lorenzo92 [0] (~chatzilla@host12-110-dynamic.244-95-r.retail.telecomitalia.it) 16.18.00 # pamaury (logs): arghh I figured out why it doesn't work, well simply because muxsel and drive registers are little different here on stmp3600 ^^ 16.18.12 # I will workout that later! 16.22.39 Quit lorenzo92 (Ping timeout: 252 seconds) 16.29.12 Quit [Saint_] (Remote host closed the connection) 16.30.23 Join sentriz [0] (~Senan@78.143.151.93) 16.31.27 Join [Saint] [0] (~saint@rockbox/user/saint) 16.38.58 Quit amithkk_ (Remote host closed the connection) 17.15.29 Quit shamus (Read error: Connection reset by peer) 17.15.37 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 17.16.38 Join amithkk_ [0] (uid4289@gateway/web/irccloud.com/x-reujcdhstymabcwh) 17.17.45 Quit shamus (Read error: Connection reset by peer) 17.18.32 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 17.44.44 Quit sentriz (Ping timeout: 252 seconds) 17.52.56 Join sentriz [0] (~Senan@78.143.151.93) 18.06.34 Join theli_ua [0] (~theli@aromanov.la.net.ua) 18.07.44 Quit theli_ua (Client Quit) 18.12.07 *** Saving seen data "./dancer.seen" 18.13.01 Quit prof_wolfff (Remote host closed the connection) 18.20.49 Quit scorche (Disconnected by services) 18.20.52 Join scorche` [0] (~scorche@rockbox/administrator/scorche) 18.22.30 Quit sentriz (Ping timeout: 252 seconds) 18.29.54 Quit Horscht (Quit: Verlassend) 18.44.02 Join Horscht [0] (~Horscht@p54946AFA.dip.t-dialin.net) 18.44.03 Quit Horscht (Changing host) 18.44.03 Join Horscht [0] (~Horscht@xbmc/user/horscht) 18.45.02 Join pamaury [0] (~quassel@cez63-2-88-164-98-172.fbx.proxad.net) 18.45.02 Quit pamaury (Changing host) 18.45.02 Join pamaury [0] (~quassel@rockbox/developer/pamaury) 18.53.23 Join SuperBrainAK [0] (~Andy@ip72-223-111-21.ph.ph.cox.net) 19.09.55 Quit shamus (Read error: Connection reset by peer) 19.10.20 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 19.13.32 Quit Horscht (Read error: Connection reset by peer) 19.17.00 Join eckoit [0] (~ryan@50.65.10.24) 19.20.17 Quit nosa-j (Read error: No route to host) 19.33.41 Quit shamus (Read error: Connection reset by peer) 19.33.53 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 19.54.54 Join sentriz [0] (~Senan@78.143.151.93) 19.58.00 Quit akaWolf (Read error: Connection reset by peer) 19.58.18 Join akaWolf [0] (~akaWolf@unaffiliated/akawolf) 20.02.42 Quit sentriz (Quit: Leaving) 20.03.03 Quit melmothX (Ping timeout: 265 seconds) 20.03.35 Quit akaWolf (Ping timeout: 260 seconds) 20.04.04 Quit shamus (Read error: Connection reset by peer) 20.04.41 Join melmothX [0] (~melmoth@unaffiliated/melmothx) 20.04.54 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 20.12.09 *** Saving seen data "./dancer.seen" 20.12.48 Join PagaNzoR [0] (~taraska99@balticom-144-147.balticom.lv) 20.23.45 # any way to fix clip zip on rockbox power button act like back and pause ? 20.24.25 Join Neovanglist [0] (~Neovangli@69.31.87.218) 20.24.33 # PagaNzoR: it's not broken 20.25.35 # short power is mapped to "stop". See http://download.rockbox.org/daily/manual/rockbox-sansaclipzip/rockbox-buildch4.html#x7-500004.3.1 20.25.37 # ok it just not working right 20.26.03 # it's working as documented 20.27.13 # so no way disable that crap Power Stop playback ? 20.27.54 # PagaNzoR, just change the keymap 20.30.22 # thx, i try it 20.33.14 # pretty simple, just some BUTTON_POWER instances - http://git.rockbox.org/?p=rockbox.git;a=blob;f=apps/keymaps/keymap-clip.c;h=0caf0de360df3e4031f9265d8e93874563b0933f;hb=HEAD 20.33.36 Join saratoga [0] (47e22765@gateway/web/freenode/ip.71.226.39.101) 20.34.54 # saratoga, is it possible that g#231 drains the battery quite a bit? 20.34.56 # Gerrit review #231 at http://gerrit.rockbox.org/r/231 : Work in progress hermite resampler. by Michael Giacomelli (changes/31/231/7) 20.35.27 # dfkt: probably 20.35.38 # theres no assembly at all for it 20.36.14 # i don't think i tried test_codec though so i'm not sure 20.36.14 # ah ok, thought so... my ancient x5 battery isn't up to that patch then :) 20.37.03 # the X5 has no data cache i think, so putting the resample_data struct in IRAM may make it a lot faster 20.37.12 # (i never had a coldfire device so I could be wrong) 20.37.31 # oh its already in IRAM 20.37.33 # nevermind 20.49.49 Quit Neovanglist (Quit: Lost terminal) 20.53.02 Quit PagaNzoR (Quit: PagaNzoR) 21.26.38 Quit SuperBrainAK (Ping timeout: 260 seconds) 21.29.31 Join Emph4s3r [0] (~thc@p579AB2A1.dip.t-dialin.net) 21.31.58 # is this the right path "/MUSIC/: no" in the disktidy.config if i want to remove the folder "MUSIC" from the SD card with the disktidy plugin on my sansa clip? 21.33.31 # or should it be "//MUSIC/: no" 21.34.16 # sadly the documentation to the disktidy plugin is not very detailed... 21.35.01 Quit the-kyle (Ping timeout: 252 seconds) 21.37.38 # I don't use disktidy myself, so I'm not sure, but I'd expect "/MUSIC/: no" will work, although the "no" probably means it defaults to not remove things there 21.39.12 Join SuperBrainAK [0] (~Andy@ip72-223-111-21.ph.ph.cox.net) 21.39.30 # thanks, i'm aware of the "no" 21.41.08 # i was not sure because the headings (i.e. "< Other >: no") also start with "<" 21.41.21 Quit shamus (Read error: Connection reset by peer) 21.41.29 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 21.41.34 # I'd expect that if you indent things properly it should work 21.46.49 Quit shamus (Read error: Connection reset by peer) 21.47.10 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 21.47.19 # another thing i don't understand fully: if i start disktidy and select "files to clean" - there is always every file/entry selected although there is a "no" at every file/entry in the "disktidy.config" 21.47.50 # 1. shouldn't it select only the files with "yes" 21.49.41 # and 2. shouldn't it save my previous selection as stated in the wiki (http://www.rockbox.org/wiki/PluginDiskTidy) 21.49.50 # "the default config is to not remove any files so the first time you run it you need to go into the "Files To Clean" screen the first time. Your changes will then be saved for the next time." 22.12.11 *** Saving seen data "./dancer.seen" 22.13.53 Quit shamus (Read error: Connection reset by peer) 22.14.27 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 22.32.26 Join lazer [0] (~lazer@85.220.201.243) 22.32.33 # Hello... 22.34.52 # Could someone please help me to install a new bootloader.bin build with crosscompiler and git? I've got a Iriver H320. I think I need a *.hex file to flash the bootloader or I'm wrong? Please help. Thanks. 22.37.09 # Or should I simply copy the created rockbox.iriver to the player? 22.38.41 # lazer: have you read http://download.rockbox.org/daily/manual/rockbox-iriverh300/rockbox-buildch2.html#x4-110002.2.2 ? 22.39.26 # No one moment please... 22.40.30 # Ok I read this before :) 22.41.14 # But if I patch this original firmware, how can I include my compiled bootloader? 22.44.12 # do you need to change the bootloader? that tends to be fairly dangerous 22.44.33 # *don't* compile your own bootloader unless you *really* know what you're doing 22.46.32 # I've got the problem with my player that it has usb-problems. The player detects the compact flash card correctly but under linux or windows it fails... 22.48.47 # Does anyone knows this problem? With my original hdd it detects all correctly and I can see the device... 22.49.50 # i guess the hardware USB bridge does not like the flash memory 22.50.00 # has anyone on the forums reported this problem before? 22.51.27 # I found out that the problem is that it detects the compact flash wrong... 32GB seems to be detected as a 4GB device 22.51.58 # saratoga: I can# 22.52.13 # saratoga: I can't found anything like this 22.52.40 # have other people put CF cards into that player? 22.52.45 # maybe you should try using one of their cards 22.52.47 # It seems that other peope get it to work! 22.53.36 # I bought the same card... I can't understand this... I've already tried several cards 22.53.37 # using the same CF as you? 22.53.57 # Yes, Kingston elite pro 32GB 22.54.03 Quit kevku (Quit: KVIrc 4.3.1 Aria http://www.kvirc.net/) 22.54.20 # One moment please I'm searching the link 22.54.58 # http://www.rockbox.org/wiki/CFModGuide 22.55.34 # MatthiasLarisch did this before. 22.56.00 Quit shamus (Read error: Connection reset by peer) 22.56.09 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 22.56.32 # ah but using the bootloader from that wiki page 22.57.06 # I already tried this too.... 22.57.45 # It's funny the player detects the compact flash correctly... 22.58.29 # I can't understand where the problem is! 22.59.10 # But I can't transfer data to it! 23.00.20 # saratoga: do you know what the wikipedia patch is? 23.02.45 # saratoga: you said you think that the usb-bridge is the problem. I can't judge this but I can say that the player is initialised correctly but dmesg and /var/log/messages give me errors 23.03.20 # no i don't know anything about that player 23.04.51 # hmm... 23.06.45 # saratoga: can you give me a hint how i can fix this... someone I can ask for example? 23.07.06 # you used that bootloader? 23.07.24 # yes its installed at the moment! 23.07.33 # then i don't know what else you can do 23.07.48 # maybe watch the chat logs here in case someone else has an idea 23.08.11 # ok 23.10.18 Join brkfstsqd [0] (~quassel@108-81-18-58.lightspeed.irvnca.sbcglobal.net) 23.14.45 Quit shamus (Read error: Connection reset by peer) 23.15.33 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 23.15.36 # for me it seems that i could be a problem what software i use for patching!? 23.20.58 Quit melmothX (Quit: bau) 23.21.14 Quit y4n (Quit: Today is the perfect day for a perfect day.) 23.35.30 Quit shamus (Read error: Connection reset by peer) 23.35.37 Join shamus [0] (~shamus@ip-206-192-195-49.marylandheights.ip.cablemo.net) 23.51.22 Quit shamus (Read error: Connection reset by peer)