--- Log for 01.10.117 Server: orwell.freenode.net Channel: #rockbox --- Nick: logbot Version: Dancer V4.16 Started: 16 hours and 19 minutes ago 00.01.15 Quit paulk-gagarine (Excess Flood) 00.03.31 Join paulk-gagarine [0] (~paulk-gag@gagarine.paulk.fr) 00.22.55 Quit _meg (Ping timeout: 255 seconds) 00.23.33 Join _meg [0] (~notsure@211.25.203.45) 00.24.41 Quit __builtin (Ping timeout: 260 seconds) 00.25.42 Join __builtin [0] (~xray@rockbox/developer/builtin) 00.30.40 Quit paulk-gagarine (Ping timeout: 240 seconds) 00.31.54 Part robertd1 00.34.27 Join paulk-gagarine [0] (~paulk-gag@gagarine.paulk.fr) 00.40.00 Join micah [0] (~micah@debian/developer/micah) 00.40.38 # hey, i got a nwz-a17, and am looking at https://www.rockbox.org/wiki/SonyNWLinuxPort#Rockbox -- there seems to be a missing word there, "unzip it at the of your device" 00.40.51 # i guess that is supposed to be 'at the root of your device"? 00.41.35 Join ZincAlloy [0] (~Adium@2a02:8108:8b80:1700:9443:4080:2f4b:d553) 00.42.58 # <__builtin> you can edit it (it's a wiki) 00.48.52 # sure, but I am not certain that is the missing word 00.49.07 # as it says in red at the top, "do not follow those instructions if you don't understand them, they could brick your device" 00.49.30 # a key missing word could mean the difference between a bricked device and not :o 00.59.11 Part Charl ("Leaving") 01.21.42 Quit ZincAlloy (Quit: Leaving.) 01.37.17 Quit krabador (Remote host closed the connection) 01.42.20 *** Saving seen data "./dancer.seen" 01.48.20 Quit xorly (Ping timeout: 264 seconds) 01.59.02 Join Ruhan [0] (uid76353@gateway/web/irccloud.com/x-utwdazjljmbzadqw) 01.59.56 Join ungali [0] (~ungali@S010690b134fd69f0.ed.shawcable.net) 01.59.56 Quit ungali (Changing host) 01.59.56 Join ungali [0] (~ungali@unaffiliated/ungali) 02.07.02 # Build Server message: 3New build round started. Revision b938610, 273 builds, 13 clients. 02.12.54 Quit Bilgus (Remote host closed the connection) 02.13.16 Join Bilgus [0] (~Bilgus@gateway/tor-sasl/bilgus) 02.20.32 # Build Server message: 3Build round completed after 811 seconds. 02.20.41 # Build Server message: 3Revision b938610 result: All green 02.20.42 # Build Server message: 3New build round started. Revision 752f7b1, 273 builds, 12 clients. 02.30.56 # Build Server message: 3Build round completed after 616 seconds. 02.30.57 # Build Server message: 3Revision 752f7b1 result: All green 02.47.37 Join MarcusB [0] (18948763@gateway/web/freenode/ip.24.148.135.99) 02.49.06 # Can someone add me to the WikiUsersGroup? I just registered and was directed here. 02.49.49 # WikiName is "MarcusBehel" 02.50.54 # Build Server message: 3New build round started. Revision 23e7d0e, 273 builds, 13 clients. 02.53.49 Quit ender` (Quit: Don't worry about the world coming to an end today. It's already tomorrow in Australia.) 02.55.44 # <__builtin> MarcusB: done 03.02.36 # Build Server message: 3Build round completed after 702 seconds. 03.02.39 # Build Server message: 3Revision 23e7d0e result: All green 03.04.05 Quit MarcusB (Quit: Page closed) 03.17.10 Join MBehel [0] (18948763@gateway/web/freenode/ip.24.148.135.99) 03.21.44 Join JdGordon [0] (~jonno@rockbox/developer/JdGordon) 03.21.48 Quit MBehel (Ping timeout: 260 seconds) 03.22.06 Quit JdGordon_ (Ping timeout: 248 seconds) 03.25.16 Quit Bilgus (Remote host closed the connection) 03.25.36 Join Bilgus [0] (~Bilgus@gateway/tor-sasl/bilgus) 03.42.22 *** Saving seen data "./dancer.seen" 03.59.04 Quit Aldem (Read error: Connection reset by peer) 04.00.29 Join Aldem [0] (~Aldem@unaffiliated/aldem) 04.18.35 Quit Ruhan (Quit: Connection closed for inactivity) 04.23.54 Quit smoke_fumus (Quit: KVIrc 4.2.0 Equilibrium http://www.kvirc.net/) 04.54.34 Quit _meg (Ping timeout: 240 seconds) 04.55.44 Join _meg [0] (~notsure@211.25.203.45) 05.35.07 Quit ungali (Ping timeout: 240 seconds) 05.36.03 Join ungali [0] (~ungali@unaffiliated/ungali) 05.42.23 *** Saving seen data "./dancer.seen" 06.08.07 Quit [7] (Ping timeout: 258 seconds) 06.09.04 Join TheSeven [0] (~quassel@rockbox/developer/TheSeven) 06.38.19 Quit TheSeven (Ping timeout: 246 seconds) 06.38.48 Join TheSeven [0] (~quassel@rockbox/developer/TheSeven) 07.42.27 *** Saving seen data "./dancer.seen" 07.55.28 Quit advcomp2019 (Read error: Connection reset by peer) 07.55.48 Join advcomp2019 [0] (~advcomp20@65-131-165-91.sxct.qwest.net) 07.55.48 Quit advcomp2019 (Changing host) 07.55.48 Join advcomp2019 [0] (~advcomp20@unaffiliated/advcomp2019) 07.56.42 Join dys [0] (~dys@tmo-103-90.customers.d1-online.com) 08.43.27 Quit ungali (Remote host closed the connection) 09.00.09 Nick tomflint is now known as tombflint (~tomflint@unaffiliated/tomflint) 09.33.48 Join johnb4 [0] (~johnb2@p5B3AFA12.dip0.t-ipconnect.de) 09.34.16 # micah: I fixed that wiki line. 09.42.31 *** Saving seen data "./dancer.seen" 09.51.04 Quit [Saint] (Remote host closed the connection) 09.51.27 Quit johnb4 (Ping timeout: 248 seconds) 09.52.13 Join [Saint] [0] (~sinner@rockbox/staff/saint) 10.03.06 Join PurlingNayuki [0] (~Thunderbi@2001:da8:215:4ff:8137:35bf:ed4:d5e1) 10.07.28 Quit PurlingNayuki (Ping timeout: 255 seconds) 10.07.36 Join lebellium [0] (~chatzilla@89-93-177-206.hfc.dyn.abo.bbox.fr) 10.22.54 Quit michaelni (Ping timeout: 248 seconds) 10.26.49 Quit pixelma (Quit: .) 10.26.49 Quit amiconn (Quit: http://quassel-irc.org - Chat comfortably. Anywhere.) 10.27.00 Join amiconn [0] (~amiconn@rockbox/developer/amiconn) 10.27.01 Join pixelma [0] (~pixelma@rockbox/staff/pixelma) 10.31.13 Join PurlingNayuki [0] (~Thunderbi@112.97.59.5) 10.33.00 Quit paulk-gagarine (Ping timeout: 258 seconds) 10.36.22 Join michaelni [0] (~michael@213-47-41-20.cable.dynamic.surfer.at) 10.37.40 Quit PurlingNayuki (Ping timeout: 240 seconds) 10.37.49 Join PurlingNayuki1 [0] (~Thunderbi@112.97.59.5) 10.42.00 Quit PurlingNayuki1 (Ping timeout: 240 seconds) 10.48.09 Join paulk-gagarine [0] (~paulk-gag@gagarine.paulk.fr) 10.58.40 Join PurlingNayuki [0] (~Thunderbi@118.144.137.123) 11.03.22 Join ender` [0] (krneki@foo.eternallybored.org) 11.06.21 Quit paulk-gagarine (Ping timeout: 260 seconds) 11.08.13 Join paulk-gagarine [0] (~paulk-gag@gagarine.paulk.fr) 11.29.50 Join PurlingNayuki1 [0] (~Thunderbi@108.61.183.158) 11.31.05 Quit PurlingNayuki1 (Remote host closed the connection) 11.31.16 Quit PurlingNayuki (Ping timeout: 258 seconds) 11.39.43 Join PurlingNayuki [0] (~Thunderbi@118.144.137.123) 11.42.35 *** Saving seen data "./dancer.seen" 11.43.12 Join pamaury [0] (~pamaury@rockbox/developer/pamaury) 11.44.07 Quit paulk-gagarine (Ping timeout: 240 seconds) 11.46.36 Join johnb4 [0] (~johnb2@p5B3AFA12.dip0.t-ipconnect.de) 11.49.12 Join PurlingNayuki1 [0] (~Thunderbi@183.240.196.74) 11.50.22 Quit PurlingNayuki (Ping timeout: 248 seconds) 11.50.23 Nick PurlingNayuki1 is now known as PurlingNayuki (~Thunderbi@183.240.196.74) 11.50.38 Join paulk-gagarine [0] (~paulk-gag@gagarine.paulk.fr) 12.00.00 Join PurlingNayuki1 [0] (~Thunderbi@108.61.183.158) 12.01.20 Quit PurlingNayuki (Ping timeout: 240 seconds) 12.01.20 Nick PurlingNayuki1 is now known as PurlingNayuki (~Thunderbi@108.61.183.158) 12.01.27 Quit PurlingNayuki (Remote host closed the connection) 12.04.16 Join xorly [0] (~xorly@ip-86-49-24-93.net.upcbroadband.cz) 12.04.46 Join krabador [0] (~krabador@unaffiliated/krabador) 12.04.47 Join PurlingNayuki [0] (~Thunderbi@122.224.52.17) 12.34.47 Join Bilgus_ [0] (~Bilgus@gateway/tor-sasl/bilgus) 12.36.59 Quit Bilgus (Ping timeout: 248 seconds) 12.45.15 Quit PurlingNayuki (Ping timeout: 258 seconds) 12.54.27 Quit pamaury (Ping timeout: 258 seconds) 13.01.03 Join pamaury [0] (~pamaury@rockbox/developer/pamaury) 13.11.22 Quit mmint (Ping timeout: 252 seconds) 13.14.11 Join mmint [0] (~mmint@unaffiliated/mmint) 13.17.09 Join PimpiN8 [0] (~textual@2a02:a454:38ea:1:9552:b515:b4e3:d06f) 13.22.33 Quit pamaury (Ping timeout: 264 seconds) 13.24.06 Quit krabador (Quit: Leaving) 13.39.30 Join PurlingNayuki [0] (~Thunderbi@183.240.196.73) 13.42.36 *** Saving seen data "./dancer.seen" 14.04.21 Join Ruhan [0] (uid76353@gateway/web/irccloud.com/x-fuzvezjrbktcumgs) 14.05.43 Join robertd1 [0] (~root@201.242.176.168) 14.14.40 Quit PurlingNayuki (Ping timeout: 240 seconds) 14.20.28 Join pamaury [0] (~pamaury@rockbox/developer/pamaury) 14.52.06 Quit JdGordon (Ping timeout: 260 seconds) 14.57.47 Join JdGordon [0] (~jonno@rockbox/developer/JdGordon) 15.15.00 Join smoke_fumus [0] (~smoke_fum@188.35.176.90) 15.18.22 Join PurlingNayuki [0] (~Thunderbi@2001:da8:215:4ff:c5ed:799d:4c60:2a96) 15.24.43 Quit dys (Ping timeout: 258 seconds) 15.42.38 *** Saving seen data "./dancer.seen" 16.13.56 Quit Ruhan (Quit: Connection closed for inactivity) 16.14.57 # lebellium: johnb4: g#1681 adds support for pcm frequency selection 16.15.07 # 3Gerrit review #1681 at http://gerrit.rockbox.org/r/1681 : 3sonynwza10/a20: enable pcm frequency selection (UNTESTED) by Amaury Pouly 16.15.19 # I can't test it because I don't have the A15 with me but feel free to try it, otherwise I'll test on tuesday 16.15.26 # I will give it a try. 16.16.28 # it will switch to 44.1k by default so you should not have the strange issue you had before (unless my code is wrong and it panics ;)) 16.16.37 # you can also switch to 48k 16.17.18 # pamaury: i got that weird auction site to take back the wrong sony they sent me, and they replaced it with a proper nwz-a17 16.17.21 # just got it 16.18.00 Quit PurlingNayuki (Ping timeout: 258 seconds) 16.19.59 # micah: same price? 16.20.56 # pamaury> g#1680 : is that about bass/treble? 16.20.58 # 3Gerrit review #1680 at http://gerrit.rockbox.org/r/1680 : 3sonynwzlinux: enable software tone controls by Amaury Pouly 16.21.57 # johnb4: yes 16.21.58 # pamaury: yeah! 16.22.05 # so in the end, i got a great deal 16.24.25 # indeed! 16.28.02 # just putting rockbox on it now. i do not understand the sony interface :P 16.28.54 # Hi, i keep getting the bus error at 40b19078 address 0x00000000 when playing flac files in nwz a860 16.34.32 Quit Strife89 (Ping timeout: 264 seconds) 16.36.03 Join Strife89 [0] (~quassel@adsl-98-80-182-158.mcn.bellsouth.net) 16.39.19 # pamaury: I tried g1681 with the A15, but it has still the same behaviour (I do see the new menu entry and it shows 44.1 when I hear that FF sound). 16.42.16 # robertd1: we didn't find the problem yet 16.42.41 # johnb4: can you plug usb and pastebin rockbox.log please 16.44.31 # pamaury thanks, i have tried with different flac files and compressions. No problem at all with wav files 16.45.22 # pamaury: https://pastebin.com/W1hEvcua 16.47.13 # johnb4: something is wrong, it should print something on frequency change, did you compile it yourself? 16.47.23 # yes 16.48.32 # I copied only the binary rockbox.sony 16.48.59 # but that should be ok, right? 16.49.02 # yes 16.50.36 # * pamaury looks into it 16.51.22 # ah, I think I know what the problem is 16.52.52 # micah: what website did you get this from? 16.53.54 # johnb4: https://www.auctionmaxx.com/Listing/Details/102850122/USED-SONY-WALKMAN-64GB-MEDIA-PLAYER 16.54.40 # johnb4: I updated g#1680, try it again 16.54.42 # 3Gerrit review #1680 at http://gerrit.rockbox.org/r/1680 : 3sonynwzlinux: enable software tone controls by Amaury Pouly 16.56.48 Join ZincAlloy [0] (~Adium@2a02:8108:8b80:1700:69d8:bb3d:4652:e5be) 16.57.29 # robertd1: I can reproduce the bus error, but it's hard to debug since there is no useful information about the crash :-/ 16.59.58 # pamaury is there any way I can help ? 17.00.38 # not really, you gave me the file, now I need to find the problem 17.07.29 # pamaury: well done. This worked on two trials. 17.09.20 Join dys [0] (~dys@tmo-113-104.customers.d1-online.com) 17.09.53 # https://pastebin.com/5g7Em6LV 17.09.56 Join PurlingNayuki [0] (~Thunderbi@122.224.52.17) 17.10.28 # cool :) 17.10.35 # johnb4: did you try 48k? 17.11.08 # I changed it to 48k while playing an mp3. No change noticed. 17.13.20 # micah: do you live in the US or Canada? 17.17.37 # grrr, this flac crash is completely random, it's going to be super hard to debug 17.28.23 # now flac doesn't crash anymore but I simply recompiled everything... 17.29.21 # Build Server message: 3New build round started. Revision 679ae2d, 273 builds, 14 clients. 17.30.43 # That is the same crash I had reported for the E450, right? 17.34.21 # about flac? 17.37.51 # yes 17.38.32 # yes it's the same issue 17.39.15 # pamaury: Bass and Treble certainly does have an effect on the A10. In addition to what I would expect, if feels on values > 0 also the volume is increased. 17.39.26 # * it feels 17.41.06 # johnb4: it's all done in software so I expect it should work :-p 17.41.09 # Build Server message: 3Build round completed after 707 seconds. 17.41.10 # Build Server message: 3Revision 679ae2d result: All green 17.42.18 # :-) I got that wrong. 17.42.24 # robertd1: do you have a 100% reproducible way to trigger the crash? 17.42.33 # for me it's random, some builds fail, some don't 17.42.42 *** Saving seen data "./dancer.seen" 17.42.47 # pamaury with any flac file it crashes 17.43.25 # arg, but for me none crashes now :-/ it sounds like an alignment issue 17.48.00 # pamaury after recompiling the error disappears? 17.48.29 # yes, but I probably the next build will crash, I haven't touched anything 17.51.54 Quit PimpiN8 (Quit: My MacBook has gone to sleep. ZZZzzz…) 17.59.40 Join PurlingNayuki1 [0] (~Thunderbi@118.144.137.121) 18.00.01 Quit PurlingNayuki1 (Client Quit) 18.01.26 Quit PurlingNayuki (Ping timeout: 240 seconds) 18.04.43 Join Charl [0] (80271084@gateway/web/freenode/ip.128.39.16.132) 18.06.41 # Hello, I have bricked my Sansa Clip Zip: OF boots to a green screen and modifications to internal storage is reset after poweroff/on (Rockbox still starts and can play files, just not write anything). This happened after I force-removed an SD card while running the OF. Connecting to USB from the OF fails; neither Windows nor Ubuntu can recognise the player. 18.07.09 # Also tried to use Rockbox Utility to flash original firmware. Tried to power on/off the OF several times with and without SD card. Sandisk logo displays for ~3 sec and then green screen. Hoping somebody can help. 18.08.44 Quit johnb4 (Ping timeout: 264 seconds) 18.08.55 # Charl: I don't know much about the Zip but if writes to the internal storage are not persistent, it sounds like a dead internal storage, a very common problem on sansa players 18.10.43 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 18.11.12 # pamaury: Oh my, that does not sound good. If that is the case, is there anything I can do to revive the internal sd? 18.14.01 # Charl: not that I know, but you might want to ask again tomorrow, when there are more people that know about that particular players 18.14.28 # if with luck you manage to reflash the bootloader once, I know we have a patch to put everything on the sdcard 18.14.56 # Charl have you tried the suggestions at the forums http://forums.rockbox.org/index.php?topic=51277.0 ? 18.17.56 # "powering off the player, holding the center key and then plugging it into USB. If that gets you into USB mode you can try formatting the disk" 18.19.55 Join Charl_ [0] (80271084@gateway/web/freenode/ip.128.39.16.132) 18.20.00 # robertd1: Yes, I tried the suggestions in that thread. Formatting through USB bootloader mode does not do anything (tried on Windows and Ubuntu). But the interal sd DOES show up with the correct size (8GB). 18.20.24 Quit PurlingNayuki (Quit: PurlingNayuki) 18.20.40 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 18.21.40 Join johnb4 [0] (~johnb2@p5B3AFA12.dip0.t-ipconnect.de) 18.23.03 Quit Charl (Ping timeout: 260 seconds) 18.25.16 # Charl_ : I have a clip+ with readonly memory. I put a build on the SD and start it buy launching the rockbox.sansa file from there. (aka ROLO). That build mounts only the SD, so all settings are written and read from SD. 18.26.52 # If you want me to, I can do such a build for the zip later today. 18.27.05 # bbl 18.28.56 # johnb4: That sounds really helpful. 18.30.56 # johnb4: but he needs to be able to reflash the bootloader at least once 18.31.08 # or write to the internal storage 18.31.28 Quit johnb4 (Ping timeout: 248 seconds) 18.33.17 # I think he starts into rockbox from internal then runs the special build on the sd which then saves its settings to sd 18.33.20 Join PimpiN8 [0] (~textual@2a02:a454:38ea:1:9552:b515:b4e3:d06f) 18.33.44 # convoluted but given no other option I guess its better than the trash 18.34.28 # Charl_ Without the device connected to the usb port and no sd card, after holding on/off button pressed for 30 seconds what does the screen show? 18.34.49 # but true if he can't boot the rb on the internal it wouldn't work... 18.36.28 # Bilgus_: I can boot rockbox (but not OF) from the internal. It's in a read-only state though. 18.40.17 # robertd1: It shows nothing; during 10 first seconds rockbox powers on and then off, after 30 sec the device remains off. 18.42.54 Join Charl [0] (80271084@gateway/web/freenode/ip.128.39.16.132) 18.43.28 # Charl_ There is no way of forcing MSC mode by hold the center button while connecting the device? 18.44.02 # How do I know whether it is in MSC mode? 18.44.38 Quit Charl_ (Ping timeout: 260 seconds) 18.44.57 # Charl if it shows as a hard disk in your pc 18.46.47 # robertd1: That works (Zip shows up as hd in Windows, rockbox displays logo for 1 sec but then screen is black). 18.48.00 # But formatting in that mode doesn't do anything, I tried it on Win10 and Ubuntu. Win10 says "cannot complete format", Ubuntu gives success message but reverts back to same filesystem. 18.49.02 Quit pamaury (Ping timeout: 258 seconds) 18.49.09 # Charl you cannot format that way. Windows 10 uses exfat formatting. A silly question, do you have the sansa clip firmware in your pc 18.51.52 # robertd1: Not sure what you mean. Do you mean if I have installed the Windows drivers? If yes no I haven't. 18.52.43 # Not manually at least. 18.53.46 # Charl both the windows drivers and the sansa firmware for the device. The problem occured when you removed your sd card from the device? 18.55.33 # If I remember there used to be a sansa updater application for the pc 18.55.40 # robertd1: Yes, occured when I removed sd card. 18.57.53 # Charl if I were you I would try to format the device in ubuntu, fat 32 18.58.17 # robertd1: The newest Sansa Updater I can find is from 2009, to old I presume... 18.58.41 # I tried formatting in Ubuntu already, pretty sure it was fat32. 19.02.25 # I'll try it again. 19.03.01 # Try with the sansa updater first please 19.08.30 # robertd1: Just tried sansa updater (for the fuze, there doesn't seem to be one for zip) but it does not recognise the player 19.08.55 # Tried plugging in with the center button down and plugging in "normally" 19.09.17 # Char check this please https://kb.sandisk.com/app/answers/detail/a_id/20332/kw/update 19.11.43 Join krabador [0] (~krabador@unaffiliated/krabador) 19.12.28 # robertd1: That one didn't detect it either. 19.13.27 # Chad in windows explorer can you open your device? 19.14.09 # robertd1: Yes, opens like any flash drive. Windows does not seem to label it as an mp3 player though. 19.14.31 # is it empty? 19.14.52 # "3.12 GB free of 7.35 GB" 19.15.34 # Charl can you see the .rockbox folder in there? 19.15.42 # Yes. 19.18.03 # Interestingly, "Properties" for the device lists two Rockbox drivers. 19.18.30 # Charl you can try this https://kb.sandisk.com/app/answers/detail/a_id/6675/~/formatting-sansa-players-in-windows-explorer 19.22.58 # robertd1: Yes, I have tried that method. 19.24.13 # Charl can you copy a file to the drive and have it persist a reboot? 19.24.25 # robertd1: Nope. 19.24.34 # Bilgus_: i meant 19.25.08 # In the hd properties can you right click and tell me please the file system? 19.25.27 Quit PurlingNayuki (Ping timeout: 258 seconds) 19.25.53 # robertd1: FAT32 19.26.01 # ok so here is your options 1: do what johnb suggested 2: open the player and do the recovery method 19.26.39 # unfortunately I only have a 4g image of the clip+ firmware so I doubt it'll work on your device 19.27.07 # not to mention option 2 has the potential to brick your device 19.27.39 Join johnb4 [0] (~johnb2@p5B3AFA12.dip0.t-ipconnect.de) 19.28.04 # so if you can find someone to open up their 8g clip+ and image it in recovery mode you might have a chance 19.29.21 # Bilgus_: I don't want to risk permanently bricking the device, so I'd rather load stuff off of the SD card. And I really 19.29.44 # then I think that is the option I'd go with.. 19.30.00 # don't know what you mean by 'imaging' and 'recovery mode' (noob here, sorry). 19.30.02 # Did you say you could get into the OF? 19.31.33 # https://www.rockbox.org/wiki/SansaAMSUnbrick 19.32.15 # Bilgus_: No, I can't. If I leave the OF on (which displays green screen) for ~1 hour the green screen disappears and the Sansa logo reappears, though the PC still doesn't recognise the player. I've read about people leaving the OF on and player plugged in for hours, which apparantly fixed the problem, but no luck for me. 19.32.25 # basically you short two pins on the board and it comes up in recovery mode you then make an image of this from a working clip+ and put it on your broken one 19.33.23 # oh I think you are on the clip zip then sorry 19.33.33 # Bilgus_: Yes, I'm on the Zip. :) 19.33.34 # I haven't even tried it 19.33.48 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 19.34.05 # The link doesn't list the Zip though. 19.34.18 # ok so I think your only option is what johnb suggests 19.35.07 # Which was somehow loading Rb firmware off the SD card? 19.35.14 # yes 19.35.37 # gimme 20min and I will upload a build. 19.35.38 # basically the way it would work is you let rockbox boot ( the one internal) 19.35.57 # then you run the new one from the sd card 19.36.02 # Thanks for all your help. :) 19.36.06 # Charl in some cases trying to manually update the original firmware solves the green screen problem 19.36.16 # it does a soft boot which we call ROLO 19.36.33 # and that would have to be done everytime you start the player 19.37.01 # robertd1 if the files he puts on don't persist a reboot he won't beable to do an upgrade 19.37.39 # Charl if you want to try and do an upgrade rather than using the sansa ones do the multiboot bootloader instead 19.37.53 # http://forums.rockbox.org/index.php/topic,51844.0.html 19.38.02 Quit PurlingNayuki (Ping timeout: 246 seconds) 19.38.10 # Bilgus_ I agree. I wasnt sure he tried that before 19.39.23 # and on top of that if he isn't able to get in to the OF I'm not sure it will even do an upgrade... 19.39.34 # but it's not going to hurt to try 19.40.15 Join johnb5 [0] (~johnb2@p5B3AFA12.dip0.t-ipconnect.de) 19.41.00 # but you know what Charl i have an idea 19.41.37 # go into rockbox, long press on files and go to 'show files' choose 'All'\ 19.42.45 *** Saving seen data "./dancer.seen" 19.43.09 # exit from there and go to files in the root of the drive are DID.bin and several .SYS files delete all the SYS files and reboot and try to enter the OF again 19.44.49 # if copying doesn't persist, deleting probably won't either 19.45.41 # probably but its worth a try since when those files get corrupted the OF freezes 19.45.44 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 19.46.14 # if we can get him into the oF then he might have a chance to get a new bootloader on 19.47.08 # Delete just the sys files, right? 19.47.49 # yeah as far as I know the DID.bin file is fine to delete too but for now just the (3) .SYS files 19.49.04 # still shows green screen i'm afraid 19.49.37 # ok long press power and go back to rockbox and see if the files are still gone 19.49.51 Quit PurlingNayuki (Ping timeout: 248 seconds) 19.50.15 # Nope, still there. 19.50.26 # you probably have to set sho to 'all' again 19.50.30 # show* 19.51.00 # yeah I don't think you have any other option than what johnb suggests 19.57.05 # Thanks for all the help guys! Bbl 19.57.09 # Charl: https://www.mediafire.com/file/3cldm3d6die748e/rockbox.clipzip-mountSD_only.zip 19.57.22 # Unzip this to the root of your SDcard. 19.58.16 # Boot into RB, navigate with the File Browser to / and select rockbox.sansa in there. 19.59.16 # It should restart RB with only the content of the SD visible. All changes now should persist and end up in the SD/.rockbox folder. 20.03.57 # This procedure (navigate, select) has to be done after each start of the device. That's what my son has to do ;-) 20.15.16 Quit johnb4 (Quit: Nettalk6 - www.ntalk.de) 20.17.03 Quit johnb5 (Ping timeout: 248 seconds) 20.31.39 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 20.35.58 Quit PurlingNayuki (Ping timeout: 258 seconds) 20.36.29 Join bray90820 [0] (~bray90820@50-83-217-236.client.mchsi.com) 20.37.40 Quit advcomp2019 (Read error: Connection reset by peer) 20.38.03 Join advcomp2019 [0] (~advcomp20@65-131-157-137.sxct.qwest.net) 20.38.03 Quit advcomp2019 (Changing host) 20.38.03 Join advcomp2019 [0] (~advcomp20@unaffiliated/advcomp2019) 20.40.45 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 20.45.05 Quit PurlingNayuki (Ping timeout: 240 seconds) 20.48.18 Quit Charl (Ping timeout: 260 seconds) 20.57.04 Join sielicki [0] (~sielicki@unaffiliated/n1cky) 21.20.43 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 21.25.32 Quit PurlingNayuki (Ping timeout: 264 seconds) 21.30.19 Quit Bilgus_ (Ping timeout: 248 seconds) 21.31.12 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 21.35.45 Quit PurlingNayuki (Ping timeout: 260 seconds) 21.37.50 Join Bilgus [0] (~Bilgus@gateway/tor-sasl/bilgus) 21.41.32 Part robertd1 21.42.47 *** Saving seen data "./dancer.seen" 21.45.14 Join johnb4 [0] (~johnb2@p5B3AFA12.dip0.t-ipconnect.de) 21.47.42 Quit Bilgus (Remote host closed the connection) 21.48.12 Join Bilgus [0] (~Bilgus@gateway/tor-sasl/bilgus) 21.51.58 Quit johnb4 (Ping timeout: 248 seconds) 21.52.42 Quit alexweissman (Remote host closed the connection) 21.55.30 Quit PimpiN8 (Quit: My MacBook has gone to sleep. ZZZzzz…) 21.57.41 Join alexweissman [0] (~alexweiss@c-68-50-12-70.hsd1.in.comcast.net) 22.11.47 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 22.15.57 Quit PurlingNayuki (Ping timeout: 246 seconds) 22.50.51 Quit lebellium (Quit: ChatZilla 0.9.93 [Firefox 55.0.3/20170824053622]) 23.00.44 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 23.05.05 Quit PurlingNayuki (Ping timeout: 258 seconds) 23.06.28 Join kugel [0] (~kugel@rockbox/developer/kugel) 23.06.36 Quit kugel (Client Quit) 23.14.24 Join kugel [0] (~kugel@ip5b411f76.dynamic.kabel-deutschland.de) 23.14.24 Quit kugel (Changing host) 23.14.24 Join kugel [0] (~kugel@rockbox/developer/kugel) 23.14.25 Quit kugel (Client Quit) 23.14.43 Join kugel [0] (~kugel@ip5b411f76.dynamic.kabel-deutschland.de) 23.14.43 Quit kugel (Changing host) 23.14.43 Join kugel [0] (~kugel@rockbox/developer/kugel) 23.14.50 Quit kugel (Client Quit) 23.15.39 Join PurlingNayuki [0] (~Thunderbi@183.240.196.73) 23.15.52 Join kugel [0] (~kugel@ip5b411f76.dynamic.kabel-deutschland.de) 23.15.52 Quit kugel (Changing host) 23.15.52 Join kugel [0] (~kugel@rockbox/developer/kugel) 23.17.35 Quit kugel (Client Quit) 23.18.09 Join kugel [0] (~kugel@ip5b411f76.dynamic.kabel-deutschland.de) 23.18.09 Quit kugel (Changing host) 23.18.09 Join kugel [0] (~kugel@rockbox/developer/kugel) 23.19.39 Quit PurlingNayuki (Ping timeout: 240 seconds) 23.20.58 Quit alexweissman (Remote host closed the connection) 23.21.49 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 23.26.10 Quit PurlingNayuki (Ping timeout: 258 seconds) 23.28.16 Join alexweissman [0] (~alexweiss@c-68-50-12-70.hsd1.in.comcast.net) 23.29.41 Join Charl [0] (80271084@gateway/web/freenode/ip.128.39.16.132) 23.33.47 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 23.38.03 Quit PurlingNayuki (Ping timeout: 240 seconds) 23.42.03 Quit ZincAlloy (Ping timeout: 246 seconds) 23.42.51 *** Saving seen data "./dancer.seen" 23.44.44 Join PurlingNayuki [0] (~Thunderbi@118.144.137.121) 23.48.47 Quit PurlingNayuki (Ping timeout: 248 seconds) 23.52.11 Join cc___ [0] (~ac@home.rhizogen.es)