--- Log for 15.01.118 Server: card.freenode.net Channel: #rockbox --- Nick: logbot Version: Dancer V4.16 Started: 13 days and 1 hour ago 00.10.49 Quit paulk-gagarine (Ping timeout: 256 seconds) 00.28.05 Quit pamaury (Ping timeout: 256 seconds) 00.44.38 # <__builtin> [Saint]: grayscale for duke3d 00.44.59 Quit ender` (Quit: Gray is a color; grey is a colour.) 00.45.13 # <__builtin> SDL relies on semaphores provided by the kernel 00.45.24 # <__builtin> so for duke3d to run on a grayscale target it needs semaphores enabled 00.45.36 # <__builtin> well, any target, for that matter 00.48.23 # <__builtin> I suppose I didn't make that very clear in the commit message 00.50.34 # <[Saint]> heh - cabbiev2 is about 30 LOC 00.50.52 # <[Saint]> immaterial (the monolithic version) is over 300. 00.51.07 # <[Saint]> (and growing) 00.56.28 Quit jhMikeS (Ping timeout: 276 seconds) 00.57.40 # <[Saint]> https://imgur.com/a/5t4gi 00.57.47 Quit ZincAlloy (Quit: Leaving.) 00.59.30 # <[Saint]> There would normally be genre too, and the logic is there. 00.59.39 # <[Saint]> I just don't have my files tagged with genre. 01.12.34 Join jhMikeS [0] (~jethead71@d192-24-173-177.try.wideopenwest.com) 01.12.50 Nick ProfessorIronY is now known as IronY (~IronY@unaffiliated/irony) 01.17.15 Quit xorly (Ping timeout: 276 seconds) 01.17.26 *** Saving seen data "./dancer.seen" 01.32.32 # Build Server message: 3New build round started. Revision 69ff35a, 273 builds, 11 clients. 01.44.19 # Build Server message: 3Build round completed after 707 seconds. 01.44.20 # Build Server message: 3Revision 69ff35a result: All green 01.45.27 Quit MrZeus (Ping timeout: 256 seconds) 02.14.03 Quit nlogex (Ping timeout: 260 seconds) 02.17.43 Join nlogex [0] (~nlogex@198-16-168-171.on.cable.ebox.net) 02.50.54 Quit krabador (Remote host closed the connection) 02.53.35 Quit MarcAndersen (Quit: I was using NightOwl 0.2.) 03.03.05 Quit Moarc (Ping timeout: 256 seconds) 03.05.02 Join Moarc [0] (~chujko@a105.net128.okay.pl) 03.17.30 *** Saving seen data "./dancer.seen" 03.55.09 Quit dandels (Quit: WeeChat 2.0.1) 05.17.33 *** Saving seen data "./dancer.seen" 05.41.40 Quit smoke_fumus (Quit: KVIrc 4.2.0 Equilibrium http://www.kvirc.net/) 06.09.08 Quit TheSeven (Ping timeout: 276 seconds) 06.29.05 Quit aphirst (Ping timeout: 248 seconds) 06.31.12 Join aphirst [0] (~aphirst@unaffiliated/aphirst) 06.42.40 Join TheSeven [0] (~quassel@rockbox/developer/TheSeven) 06.48.08 Quit TheSeven (Ping timeout: 276 seconds) 06.49.27 Join TheSeven [0] (~quassel@rockbox/developer/TheSeven) 06.50.35 Join ernestask [0] (~ernestask@78-56-62-157.static.zebra.lt) 06.54.07 Quit TheSeven (Ping timeout: 255 seconds) 07.12.11 Quit jhMikeS (Ping timeout: 276 seconds) 07.17.36 *** Saving seen data "./dancer.seen" 07.19.10 Join TheSeven [0] (~quassel@rockbox/developer/TheSeven) 08.11.50 Join deevious [0] (~Thunderbi@193.226.142.214) 08.50.00 Join ender` [0] (krneki@foo.eternallybored.org) 09.17.37 *** No seen item changed, no save performed. 09.45.23 Join paulk-gagarine [0] (~paulk-gag@gagarine.paulk.fr) 10.00.10 Quit nlogex (Remote host closed the connection) 10.01.03 Join petur [0] (~petur@77.246.35.40) 10.01.03 Quit petur (Changing host) 10.01.03 Join petur [0] (~petur@rockbox/developer/petur) 10.14.59 Join JannF [0] (~jann@HSI-KBW-091-089-057-179.hsi2.kabelbw.de) 10.31.30 Join p3tur [0] (~petur@rockbox/developer/petur) 10.31.44 Quit ernestask (Quit: ernestask) 10.33.02 Quit petur (Ping timeout: 276 seconds) 10.33.09 Nick p3tur is now known as petur (~petur@rockbox/developer/petur) 10.39.09 Join ernestask [0] (~ernestask@78-56-62-157.static.zebra.lt) 10.51.48 Join dys [0] (~dys@2003:5b:203b:100:6af7:28ff:fe06:801) 10.57.21 Join pamaury [0] (~pamaury@rockbox/developer/pamaury) 11.06.57 Quit paulk-gagarine (Quit: Leaving) 11.13.53 Join paulk-gagarine [0] (~paulk-gag@gagarine.paulk.fr) 11.17.39 *** Saving seen data "./dancer.seen" 11.35.25 Join xorly [0] (~xorly@ip-86-49-24-93.net.upcbroadband.cz) 11.51.03 Join q3cpma [0] (~hadrien@AAubervilliers-651-1-256-159.w86-212.abo.wanadoo.fr) 11.51.57 # Hello, I'm setting up my machine to do all the rockbox compilation, and I wondered the tuple for IMX CPUs was "arm-elf-eabi" too? 11.54.33 Quit Eli2 (Quit: Ex-Chat) 11.54.49 Quit paulk-gagarine (Ping timeout: 268 seconds) 12.02.17 Quit q3cpma (Quit: leaving) 12.10.21 Join paulk-gagarine [0] (~paulk-gag@gagarine.paulk.fr) 12.46.02 Part tomflint ("☆.。.:*・°☆.。.:*・°☆.。.:*・°☆.。.:*・°☆") 13.17.43 *** Saving seen data "./dancer.seen" 13.35.27 Join jhMikeS [0] (~jethead71@d192-24-173-177.try.wideopenwest.com) 13.46.24 Quit amofiuhr_ (Read error: Connection reset by peer) 13.48.48 Join amofiuhr_ [0] (~amofiuhr_@ip63-154-64-186.ct.co.cr) 14.04.58 Quit JannF (Ping timeout: 256 seconds) 14.07.25 Join JannF [0] (~jann@HSI-KBW-091-089-057-179.hsi2.kabelbw.de) 14.13.54 Join amayer [0] (~amayer@107-1-97-172-ip-static.hfc.comcastbusiness.net) 15.17.46 *** Saving seen data "./dancer.seen" 15.43.19 Quit dys (Ping timeout: 255 seconds) 16.33.05 Join CodeKiller [0] (5e153899@gateway/web/freenode/ip.94.21.56.153) 16.33.31 # hi 16.35.26 # CodeKiller: ask your question, people will answer if they know 16.35.29 # I'm trying to improve a codec but have troubles in debugging -- are there a way to print something to the debug output from the codec itself? I tried logf and DEBUGF without success 16.36.45 # I'm using the simulator 16.37.43 # CodeKiller: to enable logf, you need to enable logf in configure and also #define LOGF_ENABLE before #include "logf.h", the output will be printed to the log buffer, accessible in the debug menu 16.37.59 # for DEBUGF, I don't remember exactly, I think you need to enable Debug build in configure 16.38.06 # let me have a look 16.38.41 Join Saratoga [0] (47e99464@gateway/web/freenode/ip.71.233.148.100) 16.39.06 # it writes some debug from metadata.c and codec.c, but from inside of the an actual codec i have no luck 16.39.32 # Debugf should be defined in the codecs iirc 16.40.23 # iirc, the way debug.h is handled in the codecs is super hackish, defining/undefining several times, I'm making a simulator build to check 16.41.06 # Which codec are you looking at? 16.41.28 # the 'sid' one 16.41.51 # Ok, I don't know much about that 16.42.03 # the C64 music format 16.42.47 # CodeKiller: so apparently with logf disabled and DEBUG enabled, logf calls (with LOGF_ENABLE) are replaced by debugf() which is printed on the console. So it works inside rockbox, now checking for codecs 16.45.02 # CodeKiller: it seems to work, I added DEBUGF("Codec start"); to codec_crt0.c just to check and with DEBUG enabled, the message is printed to the console 16.50.47 # well, all i got are only the codec.c 's messages: calling entrypoint; not an encoder; entering run state 16.54.39 # CodeKiller: and you enabled (D)ebug in configure? 16.55.13 # and after making changes to the codec, did you not forget to run "make install" ? 16.55.47 # (otherwise the modified codecs are not copied to the simdisk/ directory I think) 16.56.31 # oh sh------ 16.57.50 # yes of course i have forgotten----- 16.58.12 # yeah that's a not-very-well-documented fact :-/ 16.58.33 # thanks for the help 16.58.49 # and sorry to bother you 16.59.00 # Fwiw I think sim always defines debug 17.17.49 *** Saving seen data "./dancer.seen" 17.29.08 Quit Saratoga (Ping timeout: 260 seconds) 17.38.29 Quit petur (Quit: Connection reset by beer) 18.00.39 Join dys [0] (~dys@2003:5b:203b:100:6af7:28ff:fe06:801) 18.11.22 Quit dan- (Ping timeout: 276 seconds) 18.26.20 Join ZincAlloy [0] (~Adium@ip1f12fa1c.dynamic.kabel-deutschland.de) 18.30.28 Join dan- [0] (~d@101.165.160.131) 18.30.28 Quit dan- (Changing host) 18.30.28 Join dan- [0] (~d@freenode/corporate-sponsor/privateinternetaccess.com/doaks) 18.32.14 Join amayer_ [0] (~amayer@107-1-97-172-ip-static.hfc.comcastbusiness.net) 18.32.14 Quit amayer (Read error: Connection reset by peer) 18.40.37 Join MrZeus [0] (~MrZeus@2a02:c7f:7066:fb00:ed04:489a:19f0:3584) 18.40.46 Quit pamaury (Ping timeout: 248 seconds) 18.54.10 Quit ZincAlloy (Quit: Leaving.) 19.06.29 Join ungali [0] (~ungali@S010690b134fd69f0.ed.shawcable.net) 19.06.29 Quit ungali (Changing host) 19.06.29 Join ungali [0] (~ungali@unaffiliated/ungali) 19.13.23 Quit ernestask (Quit: ernestask) 19.14.08 Join JannF1 [0] (~jann@HSI-KBW-091-089-057-179.hsi2.kabelbw.de) 19.16.26 Quit JannF (Ping timeout: 240 seconds) 19.17.52 *** Saving seen data "./dancer.seen" 19.19.40 Quit amayer_ (Quit: Leaving) 19.19.43 Join ZincAlloy [0] (~Adium@2a02:8108:8b80:1700:1c75:531a:be2:5ae6) 19.19.55 Join amayer [0] (~amayer@107-1-97-172-ip-static.hfc.comcastbusiness.net) 19.23.34 Join pamaury [0] (~pamaury@rockbox/developer/pamaury) 19.39.05 Part edhelas ("Stream reset by peer") 19.40.25 Join lebellium [0] (~hexchat@89-93-177-206.hfc.dyn.abo.bbox.fr) 19.54.23 Join krabador [0] (~krabador@unaffiliated/krabador) 19.57.07 Quit dys (Ping timeout: 255 seconds) 20.02.11 Quit michaelni (Quit: Leaving) 20.03.03 Join johnb3 [0] (~johnb2@p5B3AFE13.dip0.t-ipconnect.de) 20.13.39 # hi. I'm looking for a secondary rockbox player for less than 50 €. currently I use a clip+ but it's hard to get for that price. the old fuze looks nice, but even in bad shape it's above 60 €. I can only find the fuze+ for about 40 €. how's the status of the fuze+? is it even worth to buy it (touchpad)? 20.14.17 # primarily intended stationary in the car 20.14.55 # is the touchpad illuminated at least? 20.15.56 # SammysHP: touchpad is not illuminated on the fuze+ 20.16.05 # :/ 20.16.28 # it's well supported, although the touchpad handling is suboptimal (not that many people like touchpads anyway) 20.18.44 Quit amofiuhr_ (Remote host closed the connection) 20.18.49 # any suggestions what to buy? 20.18.58 Quit johnb3 (Ping timeout: 256 seconds) 20.19.11 # too bad that there's no recent hardware that is rockbox compatible 20.20.03 # don't worry, soon the cheap Sony NW-WM1 will be supported 20.20.04 # :D 20.20.32 # well there aren't cheap players, the recent Sony NW are supported, but none is below 60 or even 70 euros I think 20.20.58 # probably the cheapest is the sony nwz e380 20.21.34 # even the supported Sony are already discontinued 20.21.47 # the market is going too fast \o/ 20.22.26 # I can't even find a used nwz e380 20.22.33 Join michaelni [0] (~michael@213-47-41-20.cable.dynamic.surfer.at) 20.22.52 # I assume there is no market for hardware media players anymore 20.22.59 # there is 20.23.01 # most people use their smartphone 20.23.09 # only a few audiophiles are left 20.23.11 # there is an interesting market 20.23.18 # but not under 50€ 20.23.30 # yeah, more like >300 € 20.23.48 # SammysHP: there are many players around 100 euros 20.25.38 # the problem is more the lack of rockbox developers and lack of free-time for the few active ones 20.25.46 # there are enough devices on the market 20.38.09 Quit michaelni (Quit: Leaving) 20.42.06 Quit CodeKiller (Quit: Page closed) 20.42.18 Join michaelni [0] (~michael@213-47-41-20.cable.dynamic.surfer.at) 20.57.05 Quit ZincAlloy (Quit: Leaving.) 21.07.37 Join Eli2 [0] (~Eli2@pdpc/supporter/professional/eli2) 21.17.53 *** Saving seen data "./dancer.seen" 21.21.49 # jhMikeS: ping 21.31.34 Join this_is_a_nick [0] (~amofiuhr_@201.197.142.188) 21.44.36 Quit krabador (Quit: Leaving) 21.46.17 Quit ungali (Quit: ungali) 21.59.30 Quit JannF1 (Ping timeout: 265 seconds) 22.18.48 Join advcomp2019_ [0] (~advcomp20@unaffiliated/advcomp2019) 22.20.14 Quit advcomp2019 (Ping timeout: 256 seconds) 22.31.55 Quit amayer (Quit: Leaving) 22.44.46 Quit utrack (Ping timeout: 268 seconds) 22.47.10 Join ZincAlloy [0] (~Adium@2a02:8108:8b80:1700:1c75:531a:be2:5ae6) 22.50.34 Join utrack [0] (~utrack@unaffiliated/utrack) 23.01.00 Quit lebellium (Quit: Leaving) 23.10.37 Quit ZincAlloy (Quit: Leaving.) 23.13.30 Quit MrZeus (Ping timeout: 256 seconds) 23.17.55 *** Saving seen data "./dancer.seen" 23.29.49 Quit pamaury (Ping timeout: 260 seconds) 23.46.32 Join MrZeus [0] (~MrZeus@2a02:c7f:7066:fb00:ed04:489a:19f0:3584) 23.47.45 Join nlogex [0] (~nlogex@198-16-168-171.on.cable.ebox.net)