--- Log for 31.03.124 Server: lead.libera.chat Channel: #rockbox --- Nick: rb-logbot Version: Dancer V4.16 Started: 1 month and 9 days ago 00.58.40 # <_bilgus> amachronic, g#5626 should net about 1k, I'm going to test it in the clipzip here shortly 00.58.43 # 3Gerrit review #5626 at https://gerrit.rockbox.org/r/c/rockbox/+/5626 : 316bit Bootloaders remove lcd_backdrop draw modes by William Wilgus 01.05.00 # <_bilgus> appears to work just fine 01.18.57 Quit massiveH (Quit: Leaving) 01.25.19 # Build Server message: 3New build round started. Revision 4f652b49ae, 304 builds, 9 clients. 01.25.19 # 3clipzip clean up lcd driver a bit by William Wilgus 01.36.41 # Build Server message: 3Build round completed after 683 seconds. 01.36.42 # Build Server message: 3Revision 4f652b49ae result: All green 01.40.31 *** Saving seen data "./dancer.seen" 01.52.58 Quit JanC (Remote host closed the connection) 01.53.16 Join JanC [0] (~janc@user/janc) 02.20.55 Join JanC_ [0] (~janc@user/janc) 02.20.56 Quit JanC (Killed (iridium.libera.chat (Nickname regained by services))) 02.20.56 Nick JanC_ is now known as JanC (~janc@user/janc) 02.22.46 Quit JanC (Excess Flood) 02.23.06 Join JanC [0] (~janc@user/janc) 02.41.07 Quit JanC (Ping timeout: 256 seconds) 02.47.47 Join JanC [0] (~janc@user/janc) 03.40.32 *** Saving seen data "./dancer.seen" 03.43.38 Quit JanC (Ping timeout: 268 seconds) 03.44.16 Join JanC [0] (~janc@user/janc) 03.54.05 Quit JanC (Read error: Connection reset by peer) 03.54.21 Join JanC [0] (~janc@user/janc) 04.27.15 Quit JanC (Killed (tungsten.libera.chat (Nickname regained by services))) 04.27.22 Join JanC [0] (~janc@user/janc) 04.54.12 Quit CH23_M (Read error: Connection reset by peer) 04.55.14 Join CH23_M [0] (~CH23@revspace/participant/ch23) 05.40.36 *** Saving seen data "./dancer.seen" 06.40.05 Join CH23 [0] (~CH23@revspace/participant/ch23) 07.40.38 *** No seen item changed, no save performed. 09.09.51 Quit CH23 (Ping timeout: 256 seconds) 09.16.57 Quit CH23_M (Ping timeout: 255 seconds) 09.17.46 Join CH23_M [0] (~CH23@revspace/participant/ch23) 09.40.43 *** Saving seen data "./dancer.seen" 09.49.29 Quit CH23_M (Read error: Connection reset by peer) 09.49.36 Join masq [0] (~masq@24.62.200.35) 09.49.48 Join CH23_M [0] (~CH23@revspace/participant/ch23) 09.52.30 # have a weird issue on the surfans f20 w/ firmware 2.5. can play files (both flac and mp3) just fine in the stock firmware but on rockbox, selecting any file causes it to rapidly skip through all the files in the folder, so i suppose it's not even able to load them for some reason? everything else seems in good order but i couldn't find any info 09.52.30 # online about a glitch like this, so a bit flummoxed. appreciate any help, thanks! 10.02.47 Quit masq (Ping timeout: 272 seconds) 10.03.47 Join CH23 [0] (~CH23@2001:1c00:2a07:3a01:7c03:9269:8e48:e0e3) 10.04.29 Quit CH23 (Client Quit) 10.04.59 Join CH23 [0] (~CH23@2001:1c00:2a07:3a01:7c03:9269:8e48:e0e3) 10.05.14 Quit CH23 (Changing host) 10.05.14 Join CH23 [0] (~CH23@revspace/participant/ch23) 10.20.51 Join masq [0] (~masq@24.62.200.35) 10.52.40 # masq: this is just a wild guess, but it could be related to album art embedded in the file 10.53.44 # try stripping it out 10.53.53 # amachronic ill try it and see, thanks for the idea 10.54.10 # if that doesn't work, I can try to reproduce if you can share one of the files. 10.54.31 # <_bilgus> ive seen that before with bad playlists 10.55.22 # <_bilgus> masq, is this a fresh install? 10.55.47 # yeah installed from the daily build released yesterday 10.56.17 # <_bilgus> try an older one just in case I broke something 10.56.25 # <_bilgus> give me a moment 10.56.46 # will try that too. ive had older releases on this same device before w/o this problem 10.57.09 # and i dont think embedded album art was a factor then 11.01.01 # <_bilgus> I think thats the erosq builds -- https://download.rockbox.org/daily/aigoerosq/rockbox-aigoerosq-20240323.zip 11.01.28 # <_bilgus> try that one 11.01.34 # indeed, will do 11.01.40 # <_bilgus> thanks 11.07.10 # Build Server message: 3New build round started. Revision 7dc8d754a2, 304 builds, 9 clients. 11.07.10 # 3Disable legacy codepage handling in bootloaders by Aidan MacDonald 11.07.18 # <_bilgus> also try renaming your current .rockbox folder and make a fresh install, do this for each don't unzip on top 11.11.20 Quit CH23 (Remote host closed the connection) 11.11.45 Join CH23 [0] (~CH23@2001:1c00:2a07:3a01:7c03:9269:8e48:e0e3) 11.18.54 # Build Server message: 3Build round completed after 705 seconds. 11.18.55 # Build Server message: 3Revision 7dc8d754a2 result: All green 11.24.08 # Build Server message: 3New build round started. Revision b0a8cacd1d, 304 builds, 9 clients. 11.24.08 # 3rolo: simplify parsing scramble header in load_firmware() by Aidan MacDonald 11.28.54 # same issue with the 20240323 build, so ill try the album art thing now 11.34.28 # <_bilgus> so the way our playback system works now everything becomes a playlist behind the scenes if album art doesn't work could (in the latest dev version) try building a playlist saving it and see if you can play that if not could you pastebin a few lines from the playlist file and the control file, one should be found in the Playlists dir and the other in the root of the .rockbox folder (need to set file view to show all) 11.34.59 # Build Server message: 3Build round completed after 652 seconds. 11.35.00 # Build Server message: 3Revision b0a8cacd1d result: All green 11.35.09 # <_bilgus> to clarify a few lines from the playlist and the whole control file 11.35.25 # also, if you know roughly the last build that works that would help 11.36.18 # Build Server message: 3New build round started. Revision 5fd5f56cac, 304 builds, 9 clients. 11.36.18 # 3Disable unused LCD scroll functions in bootloaders by Aidan MacDonald 11.38.00 # <_bilgus> amachronic as far as I've observed no ill effect off those multiboot v1 patches IDK if bahus tested them but you might as well push them I think and we'll see if anything shakes out 11.38.40 # <_bilgus> since we are already messing with bootloader stuff.. 11.39.17 # yeah makes sense, I think bahus did check those since you asked 11.39.20 # can i build a playlist from the Files view on rockbox? 11.40.19 # <_bilgus> masq yes 11.40.47 *** Saving seen data "./dancer.seen" 11.40.57 # <_bilgus> browse to the folder context menu add to playlist 11.41.09 # <_bilgus> add to new 11.41.12 # <_bilgus> name it 11.42.40 # <_bilgus> bad part is these are all essentially the same family so the other 2 or 3 are still slightly questionable 11.43.09 # ok made a test playlist with one song and have same issue 11.43.37 # also seems to have difficulty initializing a database, if thats any clue 11.43.52 # <_bilgus> could you open that in the file viewer and type the line(s) you see in that playlist please? 11.44.38 # <_bilgus> browse to it context menu.. open with.. text_viewer 11.45.25 # i get a can't open error 11.45.31 # maybe this is a weird permissions thing 11.45.44 # <_bilgus> thats on the device? 11.45.55 # <_bilgus> oh this is hosted 11.47.11 # <_bilgus> rb has no concept of permissions but the underlying OS likely does 11.47.16 # ah i looked at the error message closer 11.47.23 # it actually cant even find the text_viewer program 11.47.36 # or just can't open it, at least 11.47.37 # <_bilgus> so a path issue then 11.48.32 # im just getting the zip and unzipping its entire contents into .rockbox in the root of the SD card, thats correct right? 11.49.14 # <_bilgus> rename your old .rockbox folder 11.49.30 # i made sure to do that beforehand, that shouldnt be the issue 11.49.40 # <_bilgus> ok just double checking 11.50.02 # Build Server message: 3Build round completed after 825 seconds. 11.50.04 # Build Server message: 3Revision 5fd5f56cac result: 27 errors 0 warnings 11.50.10 # <_bilgus> so that build I had you run is like a week before I messed with this path stuff 11.52.07 # <_bilgus> I don't have time today but would you mind creating a post on the forum so I or others can follow up with you in a few days? if you can identify a good build or we can do a git bisect and have you run 5-20 builds and find the issue 11.52.38 # https://imgbox.com/4iL5nI6p 11.52.46 # thats the expected path 11.52.50 # in case its any help 11.53.06 # i can check if it actually exists, one sec 11.53.53 # <_bilgus> well unfortunately we've made everything that you could actually use to check a plugin 11.54.23 # you can always just transfer the files off with USB and check them on a computer 11.55.12 # <_bilgus> wouldn't really show what rb was seeing though, but that error message does help at least the path is sane that its trying to open 11.55.29 # huh, the .rockbox/rocks directory is totally empty when i check sd card on my laptop 11.56.34 # <_bilgus> I've seen this happen before with bad sd cards but usually creating a new folder pushes it to a good part 11.57.05 # https://imgbox.com/YD4IKbmJ 11.57.10 # <_bilgus> well masq try doing the install on a fresh folder with your laptop 11.57.15 # and i get this nonsense on the Playlists directory 11.57.25 # i hope its not the sd card itself, literally bought it last week 11.58.07 # <_bilgus> is it really high capacity> 11.58.10 # <_bilgus> ? 11.58.23 # 256GB 11.58.28 # <_bilgus> from amazon and slightly cheap but not too cheap 11.58.40 # bought from best buy. it's sandisk 11.58.51 # that '???' seems like a broken sd or you corrupted the filesystem 11.58.56 # <_bilgus> oh then prob legit but could always be a bad sd 11.59.18 # yeah idk why its funky with the Playlists folder, but i can play the files fine on stock firmware which is what gets me 11.59.45 # does it happen to be exFAT? 11.59.56 # yes, i did format exfat 11.59.58 # is that a no no? 12.00.04 # <_bilgus> ding ding? 12.00.18 # I remember someone had a problem with special characters on exFAT because linux handles them inconsistently. 12.00.36 # it will allow you to do things that RB might choke on iirc 12.00.47 # am i force to use fat32? lol 12.00.51 # that would make sense, i guess 12.01.36 # or maybe it was different behavior between exfat-fuse and in-kernel exfat confusing each other 12.01.39 # or i could pop it in a windows pc and format exfat there? 12.01.59 # I'd just use fat32 if you can, since exfat brings no advantages for rockbox 12.02.40 # ok, i have a feeling this is where the issue. thanks for helping out, ill report back though 12.04.04 # Build Server message: 3New build round started. Revision af644e02a1, 304 builds, 9 clients. 12.04.05 # 3Fix red in 5fd5f56cacdd by Aidan MacDonald 12.18.31 # Build Server message: 3Build round completed after 867 seconds. 12.18.32 # Build Server message: 3Revision af644e02a1 result: All green 12.30.43 # Build Server message: 3New build round started. Revision 6ffd42548b, 304 builds, 9 clients. 12.30.43 # 3multiboot: Refactor boot data validation, add version numbers by Aidan MacDonald 12.41.53 # Build Server message: 3Build round completed after 670 seconds. 12.41.54 # Build Server message: 3Revision 6ffd42548b result: All green 12.44.21 # stlll having issue w/ FAT32 format on the 20240330 build, will try 20240323 build again 12.47.42 # hold on, i think i may have figured out the issue now 12.49.32 # ah yes, got it now. very embarrassing oversight on my part actually 12.50.08 # turns out it wasnt fully unzipping. i used a slightly different command this time. sorry for the trouble 12.52.31 # lol, no problem 12.52.47 # Build Server message: 3New build round started. Revision dc9d354ed2, 304 builds, 9 clients. 12.52.48 # 3multiboot: Add v1 boot protocol by Aidan MacDonald 13.05.07 # Build Server message: 3Build round completed after 740 seconds. 13.05.08 # Build Server message: 3Revision dc9d354ed2 result: 132 errors 0 warnings 13.06.10 Quit masq (Quit: Connection closed) 13.08.26 Quit CH23 (Quit: Leaving) 13.08.48 Join CH23 [0] (~CH23@revspace/participant/ch23) 13.21.11 # Build Server message: 3New build round started. Revision 856e3d548b, 304 builds, 9 clients. 13.21.11 # 3Fix red in dc9d354ed22b by Aidan MacDonald 13.27.29 # _bilgus some of that red was because sansaclipv2 (and sonynwz e360/e370) has HAVE_BOOTDATA defined but no multiboot, not sure why. 13.27.45 # was clipv2 supposed to have multiboot? 13.32.00 # Build Server message: 3Build round completed after 649 seconds. 13.32.01 # Build Server message: 3Revision 856e3d548b result: All green 13.33.31 Join othello8 [0] (~Thunderbi@pool-100-36-176-164.washdc.fios.verizon.net) 13.35.54 Quit othello8 (Client Quit) 13.40.50 *** Saving seen data "./dancer.seen" 13.51.07 # Build Server message: 3New build round started. Revision e631fc4723, 304 builds, 9 clients. 13.51.07 # 3tree: handle trailing slashes in currdir when navigating up by Aidan MacDonald 14.00.48 # Build Server message: 3Build round completed after 581 seconds. 14.00.49 # Build Server message: 3Revision e631fc4723 result: All green 14.04.00 Quit JanC (Ping timeout: 268 seconds) 14.09.12 Join JanC [0] (~janc@user/janc) 14.51.41 Quit Piece_Maker (Quit: ZNC 1.8.2 - https://znc.in) 14.55.44 Join Piece_Maker [0] (~eddie@bolt-17-b2-v4wan-168143-cust4.vm18.cable.virginm.net) 15.01.00 # <_bilgus> amachronic, I think it wouldn't fit 15.02.12 # <_bilgus> if it will now fit we can put it on and have someone test either that or it doesn't have a sd card but i think that was the C200 and maybe m200s 15.02.49 # <_bilgus> sorry its been like 7+ years i'll look at my patch history and notes to see which is which 15.05.32 # <_bilgus> 'clipv1, c200,e200,m200 all were removed due to space constraints in the firmware image' possibly I just didn't have anyone to test the changes 15.06.12 # <_bilgus> feel free to add it as a patch if you want and we can see if any devices come foward? 15.18.00 Quit baltazar (Ping timeout: 268 seconds) 15.19.14 Join baltazar [0] (~baltazar@user/baltazar) 15.27.12 Join JanC_ [0] (~janc@user/janc) 15.27.12 Quit JanC (Killed (iridium.libera.chat (Nickname regained by services))) 15.27.12 Nick JanC_ is now known as JanC (~janc@user/janc) 15.40.51 *** Saving seen data "./dancer.seen" 15.58.10 Quit Piece_Maker (Quit: ZNC 1.8.2 - https://znc.in) 16.02.22 Join Piece_Maker [0] (~eddie@bolt-17-b2-v4wan-168143-cust4.vm18.cable.virginm.net) 16.22.47 Quit JanC (Ping timeout: 256 seconds) 16.23.42 Join JanC [0] (~janc@user/janc) 16.47.35 Quit JanC (Remote host closed the connection) 16.48.05 Join JanC [0] (~janc@user/janc) 17.25.17 Quit Piece_Maker (Quit: ZNC 1.8.2 - https://znc.in) 17.28.56 Join Piece_Maker [0] (~eddie@bolt-17-b2-v4wan-168143-cust4.vm18.cable.virginm.net) 17.40.53 *** Saving seen data "./dancer.seen" 17.49.43 Quit baltazar (Ping timeout: 260 seconds) 17.51.19 Join baltazar [0] (~baltazar@user/baltazar) 17.56.50 Quit baltazar (Ping timeout: 252 seconds) 17.57.38 Join baltazar [0] (~baltazar@user/baltazar) 18.02.02 Quit CH23 (Ping timeout: 268 seconds) 18.06.36 Quit baltazar (Ping timeout: 255 seconds) 18.06.44 Quit CH23_M (Ping timeout: 260 seconds) 18.07.42 Join CH23_M [0] (~CH23@revspace/participant/ch23) 18.08.24 Join baltazar [0] (~baltazar@user/baltazar) 18.09.46 Quit JanC (Ping timeout: 255 seconds) 18.12.05 Join JanC [0] (~janc@user/janc) 18.27.29 Quit Piece_Maker (Quit: ZNC 1.8.2 - https://znc.in) 18.29.37 Quit CH23_M (Read error: Connection reset by peer) 18.29.56 Join CH23_M [0] (~CH23@revspace/participant/ch23) 18.30.06 Join Piece_Maker [0] (~eddie@bolt-17-b2-v4wan-168143-cust4.vm18.cable.virginm.net) 19.02.16 Quit JanC (Ping timeout: 260 seconds) 19.02.41 Join JanC [0] (~janc@user/janc) 19.09.57 Join JanC_ [0] (~janc@user/janc) 19.10.09 Nick JanC is now known as Guest8317 (~janc@user/janc) 19.10.09 Quit Guest8317 (Killed (tungsten.libera.chat (Nickname regained by services))) 19.10.09 Nick JanC_ is now known as JanC (~janc@user/janc) 19.12.19 Quit JanC (Excess Flood) 19.12.57 Quit Maxdamantus (Ping timeout: 268 seconds) 19.13.41 Join Maxdamantus [0] (~Maxdamant@user/maxdamantus) 19.18.17 Join JanC [0] (~janc@user/janc) 19.32.26 Join CH23 [0] (~CH23@revspace/participant/ch23) 19.36.07 Join massiveH [0] (~massiveH@2600:4040:a982:c800:39f0:3375:567d:48dd) 19.40.57 *** Saving seen data "./dancer.seen" 19.55.05 Join ahava [0] (~ahava@165.154.118.32) 19.55.08 # may i ask dose anyone has the tcc7801`s datasheet? i am learning the cowon d2 19.59.55 Quit ahava (Ping timeout: 260 seconds) 20.12.29 # Build Server message: 3New build round started. Revision 47784a777e, 304 builds, 9 clients. 20.12.29 # 3FS#13403: Fix compilation error in scsitools by Solomon Peachy 20.22.54 # Build Server message: 3Build round completed after 626 seconds. 20.22.55 # Build Server message: 3Revision 47784a777e result: All green 21.00.34 Quit Riviera (Quit: leaving) 21.36.04 Join Ripcord [0] (xyz@66.254.101.193) 21.41.00 *** Saving seen data "./dancer.seen" 22.04.29 Quit JanC (Ping timeout: 240 seconds) 22.09.41 Join JanC [0] (~janc@user/janc) 22.10.33 Quit othello7 (Remote host closed the connection) 22.10.54 Join othello7 [0] (~Thunderbi@pool-100-36-176-164.washdc.fios.verizon.net) 22.13.17 Quit LjL (Read error: Connection reset by peer) 22.14.01 Join LjL [0] (~ljl@user/ljl) 22.15.27 Quit othello7 (Ping timeout: 255 seconds) 22.24.18 Quit amachronic (Quit: amachronic) 22.29.03 Join othello7 [0] (~Thunderbi@pool-100-36-176-164.washdc.fios.verizon.net) 22.37.55 Quit massiveH (Quit: Leaving) 23.41.03 *** Saving seen data "./dancer.seen" 23.51.16 Join jacobk [0] (~quassel@utdpat241106.utdallas.edu) 23.57.51 Quit jacobk (Ping timeout: 268 seconds)