From: Rune Wiinberg <colourless_at_stud.ku.dk>
Date: Sat, 4 Jan 2003 13:50:13 +0100

Hi Brandon,
You need a USB2.0 <-> ATA bridge for this cable. The original Archos cable
has an integrated ISD-300 bridge (like the recorder). Unfortunallly I don't
know the exact pinout.

Good luck :-)
/Rune

----- Original Message -----
From: "Brandon K" <supremecommand_at_hotmail.com>
To: <rockbox_at_cool.haxx.se>
Sent: Saturday, January 04, 2003 5:39 AM
Subject: Re: Archos Multimedia detailed hardware information


> Now that we are armed with an interior look of the device and the
chipsets,
> does anyone have any idea if a USB 2.0 cable could be easily made? I
really
> hate spending $50 + S+H (USD) on a cable..
>
> I have a Micro Centronics 36 connector (which is what they use for the
> bottom connector) and obviously access to a standard USB cable isn't hard.
> It's the pinouts and\or chipsets in between the 2 that have me puzzles ;)
>
> -Brandon
>
> ----- Original Message -----
> From: "Joaquim Carvalho" <jdc_at_x64.com>
> To: <rockbox_at_cool.haxx.se>
> Sent: Friday, January 03, 2003 8:41 PM
> Subject: Archos Multimedia detailed hardware information
>
>
> > Here is detailed hardware info on the Multimedia:
> > http://www.eet.com/sys/uth/OEG20021127S0023
> >
> > The device uses the Texas Instruments TMS320DSC21 ARM+DSP processor and
> > probably runs the OpenSource OS DSPLinux
> > http://www.e-insite.net/index.asp?layout=article&articleid=CA93617
> >
> > Regards,
> > Joaquim Carvalho
> >
Received on 2003-01-04