Rockbox mail archive
Subject: Re: Bug: No recording since 03-01-09
From: gerald clark (gerald_clark_at_mindspring.com)
Date: 2003-01-11
Check the peak meter settings.
Is max set at -255?
change it to 0, and set min to -30 or -40
( whatever you like ).
This was reported earlier.
A variable position was changed.
Martin Borus wrote:
> Hi,
>
> from CVS 03-01-09 until today (01-11)on I have a recording
> bug on my R20GB.
>
> Even before I start the recording the peak meter goes bezerk:
> It displays both bars at full volume - even with no signal present.
> Same goes for mic (and that's normally only mono). Also it's
> very difficult to adjust the gain.
>
> Falling back to 03-01-06 solves the problem :)
>
> Martin
>
>
> My data:
>
>>ROM 1.28
>>Mask: 0x0302
>>USB: positive
>>ATA 0x200
>>PR:Positive
>>Freq: 11.0592MHz
>
>
--
Gerald L. Clark
Aero TerraTrike #1
http://www.wizwheelz.com/images/clarkaerotrike1.jpg
Member: Sky Soaring
Illinois, U.S.A.
Archos Recorder JBR20101 1.28 0x302 positive 0x200 positive 11.0592
Page was last modified "Jan 10 2012" The Rockbox Crew
|