Rockbox mail archiveSubject: Re: memory upgrade adaptor PCB
Re: memory upgrade adaptor PCB
From: Andrew Jamieson <andrew.jamieson_at_projectlab.net>
Date: Wed, 19 Feb 2003 08:37:04 +1100
How do you plan to solder the bottom layer footprint to the Archos PCB?
----- Original Message -----
From: "Dirk A. Vahlsing" <diava_at_web.de>
Sent: Tuesday, February 18, 2003 10:48 PM
Subject: memory upgrade adaptor PCB
> Hi all!
> I'm thinking about a tiny, thin adaptor PCB which is first soldered to the
archos PCB instead of the original DRAM chip and second the 8MB DRAM is
soldered onto it. Only the two missing address lines have to be wired then
instead of all the control lines and stuff.
> We are going to patch 5 recorders (-; and don't like wiring that much ;-).
So if there are enough of you interested in the PCB it may make sense to
develop this PCB and sell it. To get a reasonable price calculation I would
like to know how many of you are interested in that PCB and what would be
the maximum price you would pay for it (excluding shipping/customs duty
> Some pricing _indication_:
> 20pcs: 15EUR/pc + shipping
> 100pcs: 5EUR/pc + shipping
> If you are interested please send mail to diava _at_ web . de directly. I
will issue the results of this survey to this list end of February. Until
then I should have decided on the final order/payment procedure (suggestions
are very welcome!).
> about 25x15mm wide, 0.4mm thick
> TSOP 50(44) footprint on bottom, matches the K4E151612D
> TSOP 50 footprint on top, matches e.g. MT4LC4M16R6TG or GM71V65163C
> Ihnen fehlen die richtigen Worte für Ihre SMS? WEB.DE FreeMail hat die
> besten Sprueche für Sie. http://freemail.web.de/features/?mc=021169
Received on 2003-02-18