Rockbox mail archiveSubject: Re: memory upgrade adaptor PCB
Re: memory upgrade adaptor PCB
From: roland <for_spam_at_gmx.de>
Date: Wed, 19 Feb 2003 00:42:20 +0100
>Bundled with the PCB, but not soldered to it.
With the PCB I would have to solder every single point TWICE: DRAM -> PCB ->
So I don`t see much advantage with that.
If PCB would come pre-soldered with DRAM, this would be a better advantage,
Do you really think 16MB could be possible?
This would really be great. (most of my mp3`s are >8MB - so it would be ONE
per song.... or even less... :)
If 16MB PCB "RAM Upgrade Module" would become reality, I think I would pay a
maximum of ~40-50 ? for
----- Original Message -----
From: "Dirk A. Vahlsing" <diava_at_web.de>
To: "RockBox Mailing List" <rockbox_at_cool.haxx.se>
Cc: "Benoit Midy" <bmidy_at_guddland.lu>
Sent: Tuesday, February 18, 2003 5:00 PM
Subject: Re: memory upgrade adaptor PCB
> The pricing indication given is for the adaptor PCB only! If there is
enough interest maybe I can provide the memories, too. Bundled with the PCB,
but not soldered to it.
> But I will definitly not do the modding itself - except for my personal
jukebox ;-), sorry!
> We are currently checking for DRAMs in BGA pakages, but don't expect to
find any at all. This would offer the opportunity to upgrade to 16MB (the
CPUs max DRAM support) and to provide a preassembled PCB. But don't expect
this to come true.
> "Benoit Midy" <bmidy_at_guddland.lu> schrieb am 18.02.03 14:59:40:
> > Hi,
> > I m interrested.
> > But some questions come in my mind :
> > - the price is only for the memory hardware ? or for the upgrade
> > - if you upgrade the AJBR , should we send you the AJBR ? where ?
> > could you give more info about it ?
> > thanks
> > On Tue, 18 Feb 2003 12:48:40 +0100, Dirk A. Vahlsing wrote:
> > >diava _at_ web . de
> > Hi all!
> > I'm thinking about a tiny, thin adaptor PCB which is first soldered to
the archos PCB instead of the original DRAM chip and second the 8MB DRAM is
soldered onto it. Only the two missing address
> > lines have to be wired then instead of all the control lines and stuff.
> > We are going to patch 5 recorders (-; and don't like wiring that much
;-). So if there are enough of you interested in the PCB it may make sense
to develop this PCB and sell it. To get a reasonable
> > price calculation I would like to know how many of you are interested in
that PCB and what would be the maximum price you would pay for it (excluding
shipping/customs duty etc).
> > Some pricing _indication_:
> > 20pcs: 15EUR/pc + shipping
> > 100pcs: 5EUR/pc + shipping
> > If you are interested please send mail to diava _at_ web . de directly. I
will issue the results of this survey to this list end of February. Until
then I should have decided on the final order/payment
> > procedure (suggestions are very welcome!).
> > Specs:
> > about 25x15mm wide, 0.4mm thick
> > TSOP 50(44) footprint on bottom, matches the K4E151612D
> > TSOP 50 footprint on top, matches e.g. MT4LC4M16R6TG or GM71V65163C
> > Benoit Midy
> > Guddland Digital S.A.
> > Luxembourg
> > Tel: (352) 50 35 21 / 360
> > mailto:bmidy_at_guddland.lu
> > http://www.guddland.lu
> Sie stehen auf POP3? Dann versenden Sie mit WEB.DE FreeMail Ihre SMS
> aus Outlook oder Netscape! http://freemail.web.de/features/?mc=021178
Received on 2003-02-19
Page was last modified "Sat May 23 08:12:40 2020" The Rockbox Crew