From: huevo5050 <huevo_at_inicia.es>
Date: Mon, 24 Feb 2003 16:06:52 +0100

First at all, apologize my poor english.

Hello, since yesterday i have problems when charge my AJR20 with last
dailybuild of rockbox. The problem starts when my batteries go to absolut
zero of charge, then I plug to a charger (i always use a universal adaptor)
and say as built-in charger screen appears. In, more or less, 15 minutes the
display go off and the green led blinks. Since this the drive not goes on
and not charge. Today i decide to charge the batteries independently and the
Archos go on again, but now if i plug the charger (trickle and deep are
deactivated) i have some problems.

In battery debug i can see that if i connect the universal adaptor in 12v
the battery field up to 6,60 V and the external to 9,40 V. and the keys go
crazy. If the output voltage are 9V the values are 6,60V also and 8,60V the
external and continue crazy.

Then for a "normal" value in the power status debug display i need to put
the output of voltage of my universal adaptor to 3V !

Note: I not make the proof with builtin charge because i fear that burn my
unit (If its not yet)

Very thanks and apologize my english again.
Received on 2003-02-24