Rockbox mail archiveSubject: RE: AJBR 20 disassembly -- I'm stuck
RE: AJBR 20 disassembly -- I'm stuck
From: Gerald Clark <gerald_clark_at_mindspring.com>
Date: Sun, 6 Apr 2003 19:19:06 -0500
I don't recall having to unsolder anything.
Remove the side screws holding the drive to the rails. The drrive should slip down, and you can slide the connector off the back.
From: "Eric Woudenberg, Minidisc.org Editor"<minidisc_at_zoot.minidisc.org>
Sent: 4/6/03 5:39:45 PM
Subject: AJBR 20 disassembly -- I'm stuck
I'm pulling my son's AJBR20 apart to fix a broken power
connector. I've followed the instructions on the web (that I could
find), but on the AJBR20 it seems the USB connector is holding the two
boards together. I've desoldered the top two tabs of the USB
connector, but the two boards still won't come apart. I can see the
"computer connector" inside, and it's moving freely -- it's not the
problem. Do I have to unsolder the USB connector from the CPU board
instead? Is there something else holding the two boards together?
Eric ("Rick") Woudenberg
Received on 2003-04-07