From: Mark Spooner <markspooner_at_ntlworld.com>
Date: Fri, 11 Apr 2003 23:27:05 +0100

As for music I am using standard EAC + Lame settings for encoding

Mark

-----Original Message-----
From: owner-rockbox_at_cool.haxx.se [mailto:owner-rockbox_at_cool.haxx.se] On
Behalf Of Mark Spooner
Sent: 11 April 2003 23:23
To: rockbox_at_cool.haxx.se
Subject: RE: Digital out on Rockbox

I use Roloing the firmwares to compare (picking the same pieces of
music). I don't adjust the pitch so that should be ok. It is a bit
confusing as I can get a digital signal from the rockbox but it can only
be heard once altered to optical. Where as the archos firmware is fine
straight from coax. It is hard to know why this is. I am just hoping
someone figures out what the difference between the 2 signals is and
makes adjustments to the rockbox firmware. If not I will have to stick
with the archos firmware :(

Mark

-----Original Message-----
From: owner-rockbox_at_cool.haxx.se [mailto:owner-rockbox_at_cool.haxx.se] On
Behalf Of Martin Borus
Sent: 11 April 2003 23:13
To: rockbox_at_cool.haxx.se
Subject: Re: Digital out on Rockbox

Am 11 Apr 2003 um 11:46 hat Mark Spooner geschrieben:

>
> ITve been having a problem with digital out with Rockbox. With the
archos firmware I can connect
> my archosto my amp (with digital in) and it works fine. However with
RockboxI hear nothing
> though if I convert it to optical I hear sound. The converter also
amplifies the signal, so I am
> wondering if the rockbox signal is less than that from the original
firmware. Appreciate any help
> as I prefer the Rockbox firmware but it is important to be able to
connect the archos via the digital
> out.

Digital connections work great here for me. I use a Sony MD recorder (I
press record with no
MD inserted...) and really like the sound quality.

Assuming your connections are OK (which you can try out be ROLOing the
Archos
firmware) you might want to check out if the file you play back is
recorded in 44.1 kHz
sampling rate and that you have not changed the pitch. Once you change
the pitch,
my MD recorder can't recognize the signal any longer...

Martin
Received on 2003-04-12