dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: Re: FMR resume/bookmark bug

Re: FMR resume/bookmark bug

From: Benjamin <>
Date: Tue, 29 Jul 2003 13:32:40 -0800

I'm planning on doing a release in the next couple of days that will hopefully
address your issue (assuming it's fixed in CVS).


---------- Original Message -----------
From: "Henrik Backe" <>
Sent: Tue, 29 Jul 2003 22:50:51 +0200
Subject: Re: FMR resume/bookmark bug

> This is/was known problem with the flashed vesrion of rockbox.
> It is solved in the daily builds so the next release of Ben's
> bookmark patch will solve this problem.
> .../Henrik
> "Neon John" <> wrote in message
> > Last week I reported that I had problems with the latest build of
> > samuripanda's bookmarking mods on my FMR. Basically, the resume function
> had
> > become unreliable. The situation got worse so I went back to the previous
> > build, the first release, which had worked perfectly.
> >
> > The problem persisted and got worse to the point that now resume only
> works
> > about 1 out of 5 times. The symptom is that the unit boots normally and
> then
> > flashes the resume screen for only a fraction of a second, followed by the
> > main file listing screen. It looks like it has gotten a keystroke other
> than
> > "play". My FMR is one of those where the ON key has to be held until the
> boot
> > screen appears to make it boot. If I press the key only momentarily, it
> runs
> > the drive for a bit and then turns back off. This thought just occurred
> as
> > I'm writing this so I haven't had a chance to correlate but I wonder if
> the ON
> > keystroke is getting stored during a non-successful boot attempt and is
> then
> > being read by the resume screen?
> >
> > This is exactly the same code that worked perfectly when I loaded it
> before,
> > replacing the mainstream daily build from about a month ago.
> Unfortunately I
> > can't recall WHICH daily build so I can't go back that far.. It may be a
> pre-
> > vs post-plugin issue.
> >
> > My FMR has a weak battery contact that causes a complete loss of power if
> it
> > is jarred just right. This has resulted in my having to reload parameters
> > from cfg numerous times. These power cycles and reloads have had no
> effect on
> > this problem, indicating to me that the problem is not in volatile memory.
> >
> > John
------- End of Original Message -------
Received on 2003-07-29

Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy