From: Chris Holt <amiga2k_at_cox.net>
Date: Thu, 7 Aug 2003 23:39:29 -0400

Nah, one simply reduces the number of LEDs accordingly and and/or uses the
newer low voltage blue/white available from several sources.
You can pull lots of tricks without changing the circuit.

I've seen how they are mounted though, and it would be tedious indeed to
directly replace them.

Chris

On Fri, 08 Aug 2003 01:27:04 +0100, BlueChip wrote:
> You will need to do more than that. The forward voltage drop on on
> blue/white LEDs (white LEDs are a Blue LED with a layer of phosphor
> over the top) is far higher than that required by Green or Red - don't
> recall where orange/yellow sits on the scale; but certainly below
> Blue/White.
>
>> Open it up and change the LEDs.
>>
>>
>> I would imagine so at least.
>>
>>
>> Paul
>>
>>
>> audiobookfan_at_gmx.de wrote:
>>
>>
>>> Hi,
>>> is it possible to change the background color of the display, e.g.
>>> blue instead of green? I have a JBR15. Any help is much
>>> appreciated. Ha.
Received on 2003-08-08