From: Andreas Stemmer <groovingandi_at_gmx.de>
Date: Wed, 19 Nov 2003 16:30:30 +0100

Linus Nielsen Feltzing wrote:
> Andreas Stemmer wrote:
>> I used a 500Hz sine on the left and a 1kHz sine on the right channel.
>> With normal stereo setting, you can see a pure sine on each channel.
>
> Can you do the same test with the original firmware?

Yes of course, I did this to compare both firmwares.

From my orginal post:
http://rockbox.haxx.se/mail/archive/rockbox-archive-2003-11/0434.shtml

> 3) I generated a mp3 with a 500Hz sine on the left channel and a 1kHz sine
> on the right (and vice versa) and tested it with both firmwares and an
> oscilloscope (flat settings). There's no measureable difference, any
stereo
> separation issues would have been visible in the waveform.

Just tell me if you need more measurements.

Andreas
Received on 2003-11-19