From: Touillaud Nicolas <Nicolas.Touillaud_at_fr.thalesgroup.com>
Date: Mon, 12 Jan 2004 14:44:43 +0100

Such "standardization" (not sure of the spelling..) should be a way to use
simple, home-made, remote controls !
I know there is an hardware hack to enable the use of the remote control
with the fmr, but the idea could be be recyling broken (ie. inexpensive)
cell-phone keyboards...
 
Of course, this is just an idea, not a project...
 
Nicolas
 
 -----Message d'origine-----
De : Minuk Choi [mailto:Choi.Minuk_at_verizon.net]
Envoyé : lundi 12 janvier 2004 11:06
À : rockbox_at_cool.haxx.se
Objet : Re: button?



I don't think much skill(I have none myself) is needed for an immediate
"remedy", but I figure, since the only feasible option seems to be, to
solder wires and relocate the buttons, might as well see if an interface of
some sort can be standardized... for future expansion.
 
 
The layout of the buttons... is similar, but not exactly beneath each button
of the layout. The F1, F2, and F3 keys, for example, are not on the same
line(F1 is a little higher, I believe). There is always the solution of
just cutting out the layout part of the top lid... and then you can directly
press the buttons themselves... although that leaves the Archos vulnerable.
Received on 2004-01-12