From: Glenn Ervin at Home <GlennErvin_at_cableone.net>
Date: Tue, 9 Mar 2004 19:30:37 -0600

Could it be that your drive is jumpered to "slave"?
This jumper setting will allow a computer to boot a drive as a master but
who knows how the slave setting will work in the Archos.
Glenn.
----- Original Message -----
From: "Gerrit Van Vranken" <lists_at_vanvranken.net>
To: <rockbox_at_cool.haxx.se>
Sent: Monday, March 08, 2004 10:41 PM
Subject: Upgrading the v2 recorder HD



Folks,

I put a 40 GB drive in my v2 recorder and get the following on power up.

--------------------
ATA error: -11

Press ON to debug
--------------------

So I press on and see:

--------------------
PADR: 8A7F
PBDR: B8BF
AN0: 3FF
AN1: 3FF
AN2: 003 (flashes to 004 and 005)
AN4: 00A (flashes 009)
AN5: 002 (003)
AN6: 1B7 (1B8)
AN7: 001 (002)
Batt: 3.53V -1%
ATA: slave, 0x0

So obviously, the problem is that this is coming up as a slave drive. I've
looked at the docs for the drive and they indicate that no jumpers means
it's a master. The drive works fine in an external enclosure, but I guess I
won't be able to use it in my recorder...

Bummer.

Gerrit

_______________________________________________
http://cool.haxx.se/mailman/listinfo/rockbox

_______________________________________________
http://cool.haxx.se/mailman/listinfo/rockbox
Received on 2004-03-10