dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: RE: USB2 problem

RE: USB2 problem

From: Matt Evans <>
Date: Tue, 25 May 2004 19:06:18 +0100

Hmm. I just loaded the original archos firmware and it connects perfectly as
a USB2 connection. Seems that for my unit Rockbox doesn't allow a USB2

I wonder if anyone has ever experienced that before?


-----Original Message-----
From: [] On
Behalf Of Steve R
Sent: 25 May 2004 09:30
Subject: Re: USB2 problem

Matt Evans wrote:
> Then a message comes up in the
> sys tray to say I am connecting a Hi-speed USB device to a normal USB
> connection.

Sounds like the AJB is being correctly recognised as a USB2 device, but (for
some reason), your hub is somehow appearing to be a USB1 (the rest of your
note implies you have a USB 2 hub). You don't say whether or not you are
using an external hub or not - if so, both it and your internal root hub
need to be USB2 to get USB2 speeds. (If either of them is USB1, then the
message you get is to be expected - but not the reboot, except for perhaps
the first time you attach the device).

If this is the case, the first thing I would try is unplugging all USB
devices, including external hubs, and then removing all USB devices within
Device Manager to get XP to reinstall all USB drivers and then try
connecting the AJB again.



Received on 2004-05-25

Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy