dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: Re: USB2 problem
From: sophana (
Date: 2004-05-27

I thought that usb was entirely handled by the hardware chipset...

----- Original Message -----
From: "Matt Evans" <>
To: "'Rockbox development'" <>
Sent: Tuesday, May 25, 2004 8:06 PM
Subject: RE: USB2 problem

> Hmm. I just loaded the original archos firmware and it connects perfectly
> a USB2 connection. Seems that for my unit Rockbox doesn't allow a USB2
> connection.
> I wonder if anyone has ever experienced that before?
> Matt
> -----Original Message-----
> From: []
> Behalf Of Steve R
> Sent: 25 May 2004 09:30
> To:
> Subject: Re: USB2 problem
> Matt Evans wrote:
> > Then a message comes up in the
> > sys tray to say I am connecting a Hi-speed USB device to a normal USB
> > connection.
> Sounds like the AJB is being correctly recognised as a USB2 device, but
> some reason), your hub is somehow appearing to be a USB1 (the rest of your
> note implies you have a USB 2 hub). You don't say whether or not you are
> using an external hub or not - if so, both it and your internal root hub
> need to be USB2 to get USB2 speeds. (If either of them is USB1, then the
> message you get is to be expected - but not the reboot, except for perhaps
> the first time you attach the device).
> If this is the case, the first thing I would try is unplugging all USB
> devices, including external hubs, and then removing all USB devices within
> Device Manager to get XP to reinstall all USB drivers and then try
> connecting the AJB again.
> Steve
> _______________________________________________
> _______________________________________________


Page was last modified "Jan 10 2012" The Rockbox Crew