dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: Re: white backlight mod

Re: white backlight mod

From: Rocker <>
Date: Thu, 03 Jun 2004 14:42:11 -0600

You rule dude! Sure wish I could see that one man!

----- Original Message -----
From: "[IDC]Dragon" <>
To: <>
Sent: Thursday, June 03, 2004 1:41 PM
Subject: white backlight mod

At first I thought I'm way too old to spend an hour of micro-surgery work on
such a childish mod, but I'm quite pleased with the result:

On this picture, it looks very blue, but is in fact white with a touch of
blue. Readability is much better (mostly due to way more brightness), movies
and JPEGs look a lot better in b&w than green.

I used SMT LEDs in 0603 package, sold for Nokia phones, but can't recommend
those. This is a bit smaller than the footprint, my LEDs were extremely
sensitive to soldering heat because they had no backplate. Melts a second
after being touched by the soldering needle. Better use the larger 1206
type, they should fit. In general, the chip LEDs have to be soldered in
Because of the higher forward voltage (~3V instead of ~1.8V), I connected
two in parallel instead of in series like originally. This means you have to
cut the interconnecting trace and route 2 wires per side. The current
limiting resistor is already OK for this configuration, no need to change

And no, I'm not starting a business and do that for anybody else. ;-)


"Sie haben neue Mails!" - Die GMX Toolbar informiert Sie beim Surfen!
Jetzt aktivieren unter
Received on 2004-06-03

Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy