dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: RE: 5400rpm toshiba drive in JBR

RE: 5400rpm toshiba drive in JBR

From: Stuart Tedford <>
Date: Fri, 4 Jun 2004 09:48:13 +0100

It also now works in my JBR, yay.

I guess the main lesson to learn from all this is that OEM drives do not
always follow the spec of their retail counterparts. When there were no
jumpers on the drive (master mode for retail drives), my drive was in fact
still looking for cable select. Of all the devices I tried it in, only the
Compaq Laptop the drive shipped in provided the correct level on the cable
select pin.

Thanks again for all the help.


> -----Original Message-----
> From: Stuart Tedford []
> Sent: 02 June 2004 17:39
> To: 'Rockbox development'
> Subject: RE: 5400rpm toshiba drive in JBR
> It works! on my external USB enclosure, I'll try it in my
> jukbox when I get
> a chance and let you know.
> I linked cable select (pin 28) on the HDD to the adjacent
> ground (pin 26)
> and put the drive in "cable select" mode using the normal
> jumper settings
> provided on the end of the drive and it works now. I used
> this page as a
> reference:
> Thanks everyone for helping me.
> Stu.
> _______________________________________________
Received on 2004-06-04

Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy