|
Rockbox mail archiveSubject: Re: Update: Rockbox running directly from flash rom (ROMbox)Re: Update: Rockbox running directly from flash rom (ROMbox)
From: <flgants_at_earthlink.net>
Date: Thu, 29 Jul 2004 21:52:54 -0400 I downlaoded rombox and the lateest DB, but the viewers dont work on my V2. Gary ----- Original Message ----- From: "Jens Arnold" <arnold-j_at_t-online.de> To: "Rockbox development" <rockbox_at_cool.haxx.se> Sent: Thursday, July 29, 2004 8:04 PM Subject: Update: Rockbox running directly from flash rom (ROMbox) > Hello all, > > I updated my ROMbox builds to the latest cvs, enabling the use > of the splitedit.rock if used in conjunction with a daily build > of 2004-07-30 or later. (In fact, it re-enables the use of all > plugins, since the plugin api has changed in an incompatible way > since the last ROMbox builds were released. > > For your convenience, the instructions are included again. > > Btw: Did no one dare to try this out on a V2 recorder yet? > I really would like to know if it works for these as well. > > I use ROMbox on my V1 recorder all the time, and I didn't find > any problems with it so far. > > Note to V2 users: The V2 version of Rombox is untested, and > compiled "blindly" based on the info stated by Jörg, so there > is a slight chance that Rombox won't boot on the v2. However, > the safety net (F1+On boot into Archos firmware) is there as > usual. > > > ** Requirements: > > Archos Jukebox Recorder _V1_, flashed > OR (REALLY) Archos Jukebox Recorder _V2_, flashed > > (The Player/Studio isn't currently flashable, and for the > FM Rombox won't fit in the remaining ROM space. This will > most likely change if this test proves that running from rom > is really useful) > > > ** Procedure: (Recorder V1 / V2 ONLY!) > > - Download & install a daily build of 2004-07-30 or later. > - Download the ROMbox version for your box > V1: http://arnold-j.bei.t-online.de/Rockbox/rombox-recorder.ucl > V2: http://arnold-j.bei.t-online.de/Rockbox/rombox-v2.ucl > and copy it to your box as well > - RoLo into the daily build. > - flash rombox-recorder.ucl (V1) or rombox-v2.ucl (V2) > respectively > - If flashing went ok: switch off the box and start it again > - Look into Info->Rockbox Info. The buffer value should be > > 1.790 MB (It reads 1.798 MB for me. I have the number of files > per dir set to 300, and the maximum playlist size to 5000) > > Play around with it as you would do with ordinary rockbox, and > report if anything doesn't work as expected. (Expected means > like ordinary rockbox). The only exception is the flash > plugin, see below. > > Do _not_ delete ajbrec.ajz. You'll need to RoLo into it if you > want to flash another .ucl later, as you can't flash the ROM > if Rockbox is running from it. The flash plugin should tell > you that you are running from ROM and refuse to flash if you > try that. > > If you want to do even more, you could do runtime tests, > comparing rombox runtimes with ordinary rockbox. I'm > especially interested in runtime tests with a Recorder v2. > > > Regards, Jens > > _______________________________________________ > http://cool.haxx.se/mailman/listinfo/rockbox _______________________________________________ http://cool.haxx.se/mailman/listinfo/rockbox Received on 2004-07-30 Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy |