Rockbox mail archiveSubject: RE: iRiver audio hardware
RE: iRiver audio hardware
From: rinty <rinty_at_freeuk.com>
Date: Tue, 4 Jan 2005 10:20:58 -0000
The HD certainly would disturb the FM reception, and whilst this isn't
too much of a problem on the current FMR that I have, it would be
whilst recording, as the HD would have to be accessed regularly to
save the recorded data. I had an edigital HD mp3 player, and the same
would be true for that.
[mailto:rockbox-bounces_at_cool.haxx.se]On Behalf Of Linus Nielsen
Sent: 04 January 2005 08:14
To: Rockbox development
Subject: Re: iRiver audio hardware
Dave Chapman wrote:
> Have I understood that right? i.e. up to 24-bit/96KHz for output,
> 20-bit/48KHz for input.
> Is there anything else in the iRiver that limits the full
> of the UDA1380TT ?
Unfortunately yes. The internal audio bus in the ColdFire CPU is only
bits. The 4 low bits are always 0 on the S/PDIF output.
> Also, I'm sure this is an FAQ, but I haven't found the answer - is
> technically possible to record from the FM radio on the iRiver H140?
> understand the iRiver firmware doesn't allow it.
I haven't confirmed on the PCB, but I believe the FM radio can be
recorded. Rumours say that the function is disabled because the hard
drive disturbs the FM reception.
--- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.827 / Virus Database: 564 - Release Date: 03/01/2005 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.827 / Virus Database: 564 - Release Date: 03/01/2005 _______________________________________________ http://cool.haxx.se/mailman/listinfo/rockboxReceived on 2005-01-04