dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: Re: controling the iriver

Re: controling the iriver

From: Rocker <>
Date: Fri, 21 Oct 2005 17:40:00 -0600


I was only comparing it to the Archos manual. I like the fact that it is
blind friendly to. Great job...rocker

----- Original Message -----
From: "Michael E. DiFebbo" <>
To: "Rockbox" <>
Sent: Friday, October 21, 2005 5:34 PM
Subject: Re: controling the iriver

> Actually, the WikiManual has come a long way and has a significant amount
> of information about how Rockbox works.
> Michael E. DiFebbo
> ___
> ...... Original Message .......
> On Fri, 21 Oct 2005 16:47:34 -0600 Rocker <> wrote:
>>The wickie page basically tells you how to patch the firmware and load
> rockbox on the iriver. There is not much of a manual yet. I tried to
> open
> a couple of pages so I could forward you some direct links however the
> wickie pages are not loading for some reason. The reset is a very tiny
> whole on the bottom of the player just above the USB port. when your
> player freezes up (and it will)
>>you need to stick a pin into the whole and compress the restart button
> until the player shuts off. When you remove the pin it will restart the
> player and you will be good to go.
>> ----- Original Message -----
>> From: C_no_C
>> To: Rockbox
>> Sent: Thursday, October 20, 2005 10:53 AM
>> Subject: Re: controling the iriver
>> hello there,
>> I checked out the wickie section for Iriver Port and I did not see any
> tricks for the Iriver. All I saw was a lot of technical specs on the
> player and its components.
>> I just bought an Iriver IHP 120 with rockbox on it so I am trying to
> learn everything I can before I get it. could you please point me in the
> right direction in where the tricks are. Also, it sounds like the reset
> button may be important so if you could point me to an article discussing
> what the reset button does and why and when to use it that would be great.
>> Thanks for all your help,
>> ----- Original Message -----
>> From: Rocker
>> To: Rockbox
>> Sent: Wednesday, October 19, 2005 8:47 PM
>> Subject: Re: controling the iriver
>> Hi,
>> hi.
>> how exactly do i control the iriver IHP 140? i've installed rockbox
> but can't get anyware with it when i try to bring up the menu i get a menu
> of options called erase directory, rename directory and create directory.
>> Sounds like your in the while playing screen or you have your
> settings to show directories. This will hide any individual files from
> the
> voice UI.
>> 1) Start your player using the top right button.
>> 2)Once the disc spins down depress the middle button once quickly.
> This should take you to the root directory.
>> 3)press the 3rd button which should take you to the menues which are
> always voiced.
>> 4)navigate to the playback menu and go to sho files. select music
> or supported. Navigate out to the voice menu and select speak files by
> nunmbers and speak folders by numbers. Left arrow out of the settings
> menus and your folders should be spoken.
Received on 2005-10-22

Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy