Rockbox mail archiveSubject: Fw: flashing IRiver
Fw: flashing IRiver
From: Rocker <rocker_at_shaw.ca>
Date: Thu, 03 Nov 2005 08:10:35 -0700
Hi Rob here is the helpful info I received from Jonas back in August.
----- Original Message -----
From: "Jonas H." <rasher_at_rasher.dk>
To: "Rockbox development" <rockbox_at_cool.haxx.se>
Sent: Friday, August 26, 2005 8:27 AM
Subject: Re: flashing IRiver
> On Fri, Aug 26, 2005 at 09:14:32AM -0600, Rocker wrote:
>> "Step 4: Install it on the iriver
>> Just follow the normal Firmware Upgrade procedure. You should now have a
>> boot loader that tries to load Rockbox from disk when you start the
>> *What is the normal firmware upgrade procedure for IRiver?
> First, the jukebox should be powered by the charger during the firmware
> upgrade. Follow these steps:
> Copy the patched file ihp_120.hex to the root of your player.
> Now disconnect the device and start op the player.
> Go into the menu (hold the joystick down for a few seconds).
> (Note that the menu will disappear after a 20 seconds of inactivity.)
> Go into the "General" menu (first item, so just press the joystick).
> Go to the "Firmware Upgrade" menu option (Press the joystick down 5
> Press the joystick.
> A dialog pops up asking you if you are sure - move the joystick to the
> right and press the joystick to confirm and the firmware upgrade begins.
> After a while, the player will turn off and the firmware upgrade will be
>> What am I missing here? When I patched the firmware do I need to rename
>> the resulting file?
> No, the file should be named ihp_120.hex (or ihp_100.hex if you have a
> H110 or H115 - 10 and 15gb models).
> Jonas H
> -- Random .sigs suck
Received on 2005-11-03