Rockbox mail archiveSubject: Re: installing rockbox on iriver h340
Re: installing rockbox on iriver h340
From: Scott Erichsen <pianoman_at_scotterichsen.com>
Date: Thu, 29 Dec 2005 17:29:52 +1100
Thanks for that, I've only just got my iriver so this is the first upgrade
I'll be doing. If I install the other firmware, that won't screw it up? and
will the language still be english?
Also, what is the key sequence to press to start the upgrade process?
as I'm blind I can read the screen so if any has a key sequence I can press
to start the h340 upgrade that'd be greatly appreciated.
Finally, what's the volume limitation placed on the EU versions of firmware?
----- Original Message -----
From: "victor rajewski" <askvictor_at_gmail.com>
To: "Rockbox" <rockbox_at_cool.haxx.se>
Sent: Thursday, December 29, 2005 4:59 PM
Subject: Re: installing rockbox on iriver h340
> I've been running the Korean firmware since 1.20 or so as this doesn't
> limit the volume like the EU ones do. The Japanese is the same as the
> Korean (but in Japanese). In fact, short of the volume limitation,
> these both the same as the European one. So go right ahead and use the
> japanese one.
> I just successfully installed rockbox (for the first time! yay!) on my
> H340. The device previously had the Korean firmware 1.28, but I
> patched the Korean 1.29 and installed that. Everything works just
> You can even try patching the H300.hex file which is probably still on
> your H300 from the last firmware upgrade you did (unless you deleted
> good luck!
> On 12/29/05, Scott Erichsen <pianoman_at_scotterichsen.com> wrote:
>> Hi all, I'm new to this list and a blind user.
>> I'm trying to get the correct version of the firmware for my Iriver H340
>> I know my iriver says that I have firmware version 1.28E so I downloaded
>> Europe version from the iriver.com site. However when I run fwpatcher.exe
>> and select the h300.hex file it does not patch it just says it could not
>> recognise the file.
>> I can patch the japanese version of the firmware though. I bought my
>> h340 in australia of course as I'm from there, does anyone have
>> Thanks for any help.
Received on 2005-12-29