dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: Re: Speech Problems with Iriver 340

Re: Speech Problems with Iriver 340

From: Arnaud <>
Date: Fri, 28 Apr 2006 19:10:44 +0200


what do you mean by "its whole word storage"

btw. the line in input serves also for the external mic.

You ahve to set the ADC gain to + 50 DB or something similar in the recording setting menu if I am not wrong.

*********** REPLY SEPARATOR ***********

On 28/04/2006 at 10:26 Gerhard Jaworek wrote:
Dear Rockbox users.
Since two years I use Rb together with a German voice file on an Archos Jukebox.
I use it together with speech output because I am totally blind.
Last week I have changed to an Iriver 340 because I need the recording function. After the installation of the Rb which runs properly I wanted to install the German voice file. Because of the problems with some speech software developers I could not find a new actual German voice file. I decided to try out my old one which is from October 2005. The result was that my Iriver always talked strange things.
So I rolled back to an older Rb version from March 2006 because I heard that the Lang format has changed since April.
From no on the results were better. In the menus the device always says the correct item but in the browser it starts very often to say its whole word storage.
How can I solve this problem?
2) Is there a Rb version available which supports the switching between the internal and the external microphone?
I need this function because I want to connect the device with an external stereo microphone. Therefore the line in plug must be changed to another impedance. I tested this function with the original OS and it works perfectly.
Thank you very much if you can help me with my problems.
Best Regards
Received on 2006-04-28

Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy