From: Glenn at home <GlennErvin_at_cableone.net>
Date: Sat, 4 Nov 2006 20:51:03 -0600

Hi again Dan,
Here are some steps for setting the unit to its defaults, and maybe that will get it talking.
This should be the same as when I wrote these steps, and if the menus have changed, this should not hurt to try it.
Do the following steps.
Note, the "Navi" button means the "navigation" button.
press the menu button
down arrow 3 times and press Navi button
down arrow twice and press navi button
you may need to press the navi button once more to confirm.
then just left arrow out of the menus.
HTH.
Glenn

----- Original Message -----
From: Dan Malone
To: Glenn at home ; Rockbox
Sent: Saturday, November 04, 2006 8:30 PM
Subject: Re: My IRIVER H320 IS FIXED, STILL NEED HELP


Glenn,
I tried the reset button with no response.
I think Monday is the earliest I can get someone sight to look in the menu's.
Thanks for your help.
Dan

  ----- Original Message -----
  From: Glenn at home
  To: Rockbox
  Sent: Saturday, November 04, 2006 7:33 PM
  Subject: Re: My IRIVER H320 IS FIXED, STILL NEED HELP


  Hi again Dan,
  I don't know if you tried the menus, but it will not talk until you open the menus.
  If you don't get it talking in the menus:
  Try pressing the reset button, I believe it is on the top left side of your unit, below the Mic.
  Also, you might have a sighted person go into the menus, and go into settings, and reset the unit to the rockbox defaults.
  HTH.
  Glenn
  ----- Original Message -----
  From: Dan Malone
  To: Rockbox
  Sent: Saturday, November 04, 2006 6:28 PM
  Subject: Re: My IRIVER H320 IS FIXED, STILL NEED HELP


  Hello again users.
  I forgot to add that we placed the
  english.voice in the langs directory.
  This should have been in the previous message.
  Dan

    ----- Original Message -----
    From: Dan Malone
    To: Rockbox
    Sent: Saturday, November 04, 2006 7:15 PM
    Subject: My IRIVER H320 IS FIXED, STILL NEED HELP



    Hello Rockbox users,
    I am totally blind.
    With help from my son, that's sighted, we followed the instructions, I beleive to the letter to load Rockbox on my Iriver H320.
    But, it doesn't come up talking.
    We used the patcher for the international .hex file:
    H300jp-v128.zip
    The patcher program said successful.
    And, he updated the firmware on the unit successfully as it shut itself off.
    I then extracted the folder and file from:
    rockbox-h300-20061103.zip
    We placed them on the root directory.
    We then unplugged the power and usb cords.
    When starting up, the boot screen says iriver.
    I have double checked the manuals and have glanced through the archives and I'm stumped.
    Anyone have an answer for me please?
    Thanks for any help, Dan
Received on 2006-11-05