From: Neon John <jgd_at_johngsbbq.com>
Date: Mon, 27 Nov 2006 00:13:37 -0500

The jack solders on the outside of the board. No disassembly of the
PCBs is necessary.

John


On Sun, 26 Nov 2006 20:46:12 -0500 (EST), Bradley Alexander
<storm_at_tux.org> wrote:

>Got a question for the assembled Archos wisdom here. I have a Recorder 20, and the jack the charger plugs into came loose and is currently floating around inside. I have disassembled the unit, but am trying to figure out the best way to get inside there to resolder the jack. Initially, it looked like I could loosen the two solder joints to the battery rail and remove the printed circuit board on the end of the unit to get in there...However, I melted that solder, but the pcb did not come loose.
>
>Has anyone a suggestion on how to get in there and reconnect that jack?
>
>Thanks,
>--b

---
John De Armond
See my website for my current email address
http://www.neon-john.com
Cleveland, Occupied TN
Don't let your schooling interfere with your education-Mark Twain

Received on 2006-11-27