From: Rusty Perez <rustys.lists_at_gmail.com>
Date: Mon, 29 Oct 2007 10:44:36 -0700

Hi Aman,
I asked a friend with a Sansa to go through it and give me the info.
First, you are always placed at the same spon when booting into sansa
firmware. Also, menues wrap. When you first boot, press right >r{ once
to enter settings menu.
Then press up arrow (12:00) once to get to usb and press right arrow
to activate.
Since this menu contains only two options by defalt when you enter
this menu for the first time you should be on the music player
setting. Menus wrap so press either up or down arrow to select the
mass storage option. Press the center to save and exit usb menu.
Press left arrow to get out of settings.
This should do what you want to do.
I don't have one of these, but a sighted person helped me with this.
Rusty

On 10/29/07, Aman Singer <aman_at_asinger.net> wrote:
> Hi, Denis.
> You said
> You won't be able to do this without sighted help.
> You will need to go in to the settings then info then change it there.
>
> Thanks for the response, but is there some reason the same set of
> button presses won't be able to change it on all devices?
>
> Aman
>
>
> -----Original Message-----
> From: rockbox-bounces_at_cool.haxx.se [mailto:rockbox-bounces_at_cool.haxx.se] On
> Behalf Of Dennis Bartlett
> Sent: Monday, October 29, 2007 7:52 AM
> To: 'Rockbox'
> Subject: RE: Enabling mass storage class support on the Sansa's
> originalfirmware?
>
>
> You won't be able to do this without sighted help.
> You will need to go in to the settings then info then change it there.
>
>
> -----Original Message-----
> From: rockbox-bounces_at_cool.haxx.se [mailto:rockbox-bounces_at_cool.haxx.se] On
> Behalf Of Aman Singer
> Sent: Monday, October 29, 2007 6:34 AM
> To: 'Rockbox'
> Subject: Enabling mass storage class support on the Sansa's original
> firmware?
>
> Hi, all.
> Thanks to the extraordinary help I received from people both on and
> off this list, I now have a Sandisk Sansa with a good description of its
> buttons. All I need do now is get Rockbox installed on it and life will be
> good. The problem, though, is that it's showing up as a media player, not as
> a USB mass storage device. Would anyone know, from the Sansa's original
> firmware, how to enable mass storage support using button presses? That is,
> I have, at the moment, no access to the screen. Is there a series of buttons
> one can press to enable mass storage support on the player? If someone with
> the original firmware would have a look at how this is done, I'd be deeply
> grateful. I don't think this is in the manual or on the blind users page.
> Thanks in advance.
> Aman
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.488 / Virus Database: 269.15.11/1094 - Release Date: 10/26/2007
> 8:50 AM
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.488 / Virus Database: 269.15.11/1094 - Release Date: 10/26/2007
> 8:50 AM
>
>
>
>
Received on 2007-10-29