From: Antony Stone <Antony.Stone_at_rockbox.open.source.it>
Date: Sat, 24 May 2008 10:24:41 +0100

Hi.

I'm using Rockbox r17612-080523 on an iRiver H340, and trying to work out what
the manual (section 3.4, page 21) means by "The player can be powered over
USB without connecting to your computer by holding Rec while plugging in.
This allows you to continue using the player normally."

If I start with the device powered off:

If I press REC and then plug in USB, the device power up and enters the
original iRiver firmware (as documented in section 3.1.3, dual booting).

If I plug in USB and then press REC, I get "Bootloader USB mode", it isn't
clear whether the device is charging up, but I can't use it.

If I start with the device powered on:

If I press REC and then plug in USB, it starts recording.

If I plug in USB and then press REC, I get a picture of a USB plug on the
display, and I can't use the device.

Is this a bug, or am I reading the instructions wrongly (if so, what should I
be doing to charge the device while I use it)?

Thanks for any help.


Antony.

-- 
I love deadlines.   I love the whooshing noise they make as they go by.
 - Douglas Noel Adams
                                                     Please reply to the list;
                                                           please don't CC me.
-------------------------------------------------------------------
List admin: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ:        http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette:  http://www.rockbox.org/mail/etiquette.html

Received on 2008-05-24