From: Wilfred <prievjet_at_hotmail.com>
Date: Mon, 12 Oct 2009 23:57:41 +0200

>>Wilfred wrote:
>> Hi everybody
>> I'm very eager to install RB onto my iRiver iHP-120. My player however
>> has firmware 1.17E, which I cannot find
>> in the list with original firmware on the RB site.
>> http://www.rockbox.org/wiki/IriverBoot#Download_and_extract_a_recent_ve
>> I see only versions 1.63 and higher.
>> Of course I'm afraid to damage my player, when I start working with
>> these firmware hex files on my (apparently old) player.
>> Could any of you give me a good piece of advise?

>I'm sure you can install a newer firmware without any problems. Just use
>the Rockbox Utility (the automatic installer) and follow the instructions.

>Good luck!

>Linus

Hi Linus,

Thanks for answering :-) I'm almost ready to take this step, but let me ask
one thing more:
In case the hardware of the Iriver has changed between firmware 1.17E and
1.66 there is a chance
that I'll run into trouble. Do you happen to know if there's a way to make a
backup of the original firmware? (I guess if
things would go wrong(small chance), there is no-one that can help me out,
so I would prefer to have such a backup solution)

Greetings
Wilfred


-------------------------------------------------------------------
Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
Received on 2009-10-13