dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: RE: Sansa Fuze V2 Firmware Updates

RE: Sansa Fuze V2 Firmware Updates

From: yojojo jablonski <>
Date: Fri, 18 Jun 2010 20:13:31 -0700

I am a newbe, but have read that some sansa models are mislabled. Case reads one thing, when guts are anouther. Have you checked to make sure you have a V2 Sansa Fuze? JoJo

Subject: RE: Sansa Fuze V2 Firmware Updates
Date: Fri, 18 Jun 2010 21:27:45 -0500

Hi Brian,

This could be a bug, and if so you should fill a FlySpray item to report it. But first we should rule out any possible error by your side.

Please repeat and specify the followings:

What Rockbox Utility version are you using.
What original firmware file are you using (provide a link to it, if possible).
How do you install it in RButil (manual/automatic installation).
What is the output of RB - did it succeed or failed.
Any other information that might be relevant.
Did you tried talking with developers in IRC?

Hi Tomer,
The Rockbox utility is V26825.
Original firmware is: V02.03.33, and it can be found at:
I started out patching the original firmware by hand using the command line, and every time I would make an attempt, it would always report back that it was successful. Then I tried using the automatic install feature in the RBUtil., which always reports back that the firmware was patched successfully. I've never once gotten an error.
According to my wife, who is reading the Fuze screen, when ever I unplug the Fuze V2 from the USB port the screen says, "refreshing media content", and then the settings choice re-appears, and the unit never turns itself off. Also, when ever the original firmware is installed, after it's finished, the unit deletes the fuzpa.bin file, but when trying to install the patched firmware for RB, the fuzpa.bin file is never deleted.
Unfortunately time hasn't allowed me the luxury of getting on IRC with the developers yet.
On Fri, Jun 18, 2010 at 7:06 AM, Brian Hansen <> wrote:

Well once again, I was able to successfully compile things, but after rebooting the Fuze, it still wants to load the Sansa firmware. In fact, it acts like it just rejected the modified firmware, and didn't even make an effort to install anything. Just to see if it would install firmware at all, I reinstalled the 02.03.33 firmware, and everything went just fine. In fact, it was like I had completely refreshed everything.

So for what ever reason, my Fuze doesn't like modified firmware. Any and all help would be greatly appreciated.

Did you patch the same firmware file that you successfully flashed your player with? Make sure that you've carefully read the installation instructions in your player's manual.

Please contact developers in IRC - they'll be able to help you with this (I can't help you more than this).

 Hi Tomer,
Yes, I did patch the same firmware file that I was using. Every time I've made an attempt, I've followed both the Sansa instructions, as well as the Rockbox instructions to the letter. It's as if the patched firmware isn't passing a checksum process or something, and is being rejected by the player. As a matter of fact, the patched firmware file gets left on the Fuze after each attempt, where the non-patched file gets deleted after a successful firmware install.

Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.

Received on 2010-06-19

Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy