Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: Re: iriver h10 install problem

Re: iriver h10 install problem

From: Shiner <dodgy-curry_at_ntlworld.com>
Date: Thu, 26 Jun 2014 13:08:25 +0100

  ----- Original Message -----
  From: Shiner
  To: Dave Hooper ; Rockbox
  Sent: Thursday, June 26, 2014 11:32 AM
  Subject: Re: iriver h10 install problem

    ----- Original Message -----
    From: Shiner
    To: Dave Hooper ; Rockbox
    Sent: Thursday, June 26, 2014 9:26 AM
    Subject: Re: iriver h10 install problem

      ----- Original Message -----
      From: Dave Hooper
      To: Roger ; Rockbox
      Sent: Wednesday, June 25, 2014 10:18 PM
      Subject: Re: iriver h10 install problem

      Which version of Rockbox Utility are you running? Click Help then About

      .Current. V1.40

      Take a look at his guide:
      http://www.rockbox.org/wiki/GraphicalInstall

      Will do ASAP

      You said that you selected all four checkboxes - but there should be five for the iriver H10 (should look like the pictures on the above link). Can you double-check that you selected the correct target device in Rockbox Utility?

      My fault, I could have sworn there were onlt 4 !

      If you have a 5 or 6GB H10 (as opposed to 20GB model) are you correctly choosing the UMS option (to match your H10 running in 'USB Mass Storage' mode when you connect it to your computer).

      All 3 H10's are 5G colour.

      I am entering UMS mode by holding down Select while swithing on after removing and replacing battrey.

      Is rhis correct procedure???

      Anyway, I have just d/l fresh copy of RB Utility 1.4, just to be sure.

      I will reformat, recover iriver, and try again later today.

      <X's fingers>

      ----------

      <Expletive deleted> No Joy... Same problem. :-((((.

      The only thing I can think of is to reformat and somehow clone one of my other fully RB'd H10 onto it.

      Dunno how though.

      <sigh>

      Rog

      Further.....I never got that far!

      This time, after formatting, I unplugged the USB cable....
      ....and the itiver startup logo came up and then I got the usual error message.

      In my ignorance, I assumed that a full format would wipe everything.
      So.....I need to know :

      What the missing file is (emp1.10?), where to get it
      and how (and where) to insert it.
      Otherwise I think I am truly stuffed!

      Rog

------------------------------------------------------------------------------

  -------------------------------------------------------------------
  Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
  FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
  Etiquette: http://www.rockbox.org/mail/etiquette.html

-------------------------------------------------------------------
Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
Received on 2014-06-26


Page was last modified "Jan 10 2012" The Rockbox Crew
aaa