From: Michael Sevakis <jethead71_at_sbcglobal.net>
Date: Fri, 3 Nov 2006 09:15:10 -0500

I had a feeling it might be that but don't like to jump to conclusions w/o
invesitgating. So the only one with a nice reset/reboot is the H120?

It raised a question though: how long does the reset take? It's supposed to
have about 1ms to put it high again before it goes to standby. If the pin
could be high again within a short enough time it might work.

----- Original Message -----
From: "Linus Nielsen Feltzing" <linus_at_haxx.se>
To: <rockbox-dev_at_cool.haxx.se>
Sent: Friday, November 03, 2006 5:24 AM
Subject: Re: jethead71: firmware/target/coldfire system-coldfire.c,1.2,1.3


> cvs_at_labb.contactor.se wrote:
> > More tweak to ColdFire default exception handler. iRiver reboots on
> > power press but x5 just shuts down. Haven't yet thought much about
> > why or how to make it reboot on x5 if it's possible.
>
> The X5 shuts down because the KEEP_ACT signal goes inactive when the
> port pins are tri-stated at reset. It's the same with H300.
>
> Linus
>
Received on 2006-11-03