From: Michael Sevakis <jethead71_at_sbcglobal.net>
Date: Wed, 9 May 2007 14:18:56 -0400

I'll try that but I may have been there. I did too many combos to recall for
sure though.

----- Original Message -----
From: "Antonius Hellmann" <antonius.hellmann_at_gmx.de>
To: "Michael Sevakis" <jethead71_at_sbcglobal.net>; "Rockbox development"
<rockbox-dev_at_cool.haxx.se>
Sent: Wednesday, May 09, 2007 2:11 PM
Subject: Re: Sansa (PP502x?) GPIO interrupts in rockbox software


> I just checked your patch. One idea:
> Probably the reading/writing of the gpio input generates another
interrupt,
> which in turn again accesses the gpio register? If I have it right, then
the
> original software disables the interrupt (GPIOH_INT_CLEAR), before reading
> the registers and reenables the irq again at the end of the irq routine.
>
> ----- Original Message -----
> From: "Michael Sevakis" <jethead71_at_sbcglobal.net>
> To: "Barry Wardell" <barry.wardell_at_gmail.com>; "Rockbox development"
> <rockbox-dev_at_cool.haxx.se>
> Sent: Wednesday, May 09, 2007 5:33 PM
> Subject: Re: Sansa (PP502x?) GPIO interrupts in rockbox software
>
>
> > It doesn't seem to actually enable the GPIO interrupts.
> >
> > When I do, thinks break badly with rockbox stuck at a black screen when
> > the
> > logo should be displayed but GPIO IRQs functional. The firmware doesn't
> > seem
> > to actually be running because the buttons themselves are still being
> > polled
> > and do work otherwise.
> >
> > Here the quick tester which I'd expect to have boot, disable the
> > scrollwheel
> > and blink when turned. It only does the latter two.
> >
> > You'll get some warnings but that's irrelevant to this check.
> >
> >
> > ----- Original Message -----
> > From: "Barry Wardell" <barry.wardell_at_gmail.com>
> > To: "Michael Sevakis" <jethead71_at_sbcglobal.net>; "Rockbox development"
> > <rockbox-dev_at_cool.haxx.se>
> > Sent: Wednesday, May 09, 2007 4:34 AM
> > Subject: Re: Sansa (PP502x?) GPIO interrupts in rockbox software
> >
> >
> >> On 5/9/07, Michael Sevakis <jethead71_at_sbcglobal.net> wrote:
> >> > I would've whipped up a IRQ button driver real quick and committed it
> > but I
> >> > see I've been beaten to it while fixing playback bugs. :)
> >>
> >> Well apparently the one I posted has some problems with it still and I
> >> still don't have my Sansa with me for testing so I can't do much more
> >> with it for now. Feel free to fix it up and commit ;)
> >>
> >> One word of caution - it was based on a older version of the button
> >> driver, so some of the newer fixes that were added in the past while
> >> may not be present.
> >
> >
> >
>
Received on 2007-05-09