Rockbox mail archive
Subject: Re: Contributing 'Sansa Base Station' code for the Rockbox E200 port
Re: Contributing 'Sansa Base Station' code for the Rockbox E200 port
On Jan 19, 2008 1:25 AM, Jerry Van Baren <gvb.rbx_at_gmail.com> wrote:
> Hans-Dieter Stich wrote:
> > Hi there,
> > as an enthusiastic user of the Rockbox port on my brand new Sansa E280 I
> > would like to use the Rockbox also when the Sansa is plugged into the
> > Sansa Base Station and controlled by the IR control.
> > I've successfully installed and setup the compiling and simulation
> > environment for the Rockbox development, so if you all agree, I would
> > try to add the missing Sansa Base Station support to the Sansa E200
> > Rockbox port.
> > About me:
> > I'm a software engineer for over 20 years, developing software for
> > embedded systems in automotive applications, so I really have a 'base'
> > knowledge how to program a hardware with I/O ports, interrupts and so
> > on. ;-)
> > ~ HD ~
> Hi Hans-Dieter,
> I have a *C* model (C240) and found I needed to change the audio output
> when I ran in a docking station (a Griffin iTrip car FM transmitter in
> my case).
> I would expect the same will be the case with the *E* model.
> For a starting point, see my patch:
> It needs to be enhanced, but does get the job done for me.
> Best regards,
From what i understand from Jonas mail, the Apple used protocol isn't really
from Apple, its from the PP SDK and as the Sansa v1 is based on a PP5024, it
is also probably used there. So I would at least try this approach.
Received on 2008-01-19
Page was last modified "Jan 10 2012" The Rockbox Crew