From: Marcin Bukat <marcin.bukat_at_gmail.com>
Date: Mon, 23 Nov 2009 12:43:47 +0100

I am measuring pitch on the photo and compare to datasheets for other parts
on the photo and I am quite confused. 0.5 mm sounds resonable looking at my
own eyes on PCB but measuring on the photo I am not such sure :/ I think
20pin 0.5mm is available in local electronic store. First I will try this
one.

2009/11/23 Linus Nielsen Feltzing <linus_at_haxx.se>

> Marcin Bukat wrote:
>
>> I am terribly sorry. I measured pitch of the connector against lm339 on
>> the photo and connector is standard 1.0 mm pitch. This one is easy to get.
>> Sorry again.
>> Anyway - Linus can You confirm H300 uses 20pin 1.0mm pitch connector -
>> from photos it looks exactly the same as in HD200.
>>
>
> The connector on the H300 and H100 is 0.5mm:
>
> http://se.farnell.com/jsp/search/productdetail.jsp?sku=9786350
>
> Linus
>
Received on 2009-11-23