From: Marcin Bukat <marcin.bukat_at_gmail.com>
Date: Tue, 1 Dec 2009 15:46:05 +0100

Hello,
I looked at powermgmt-h100.c file and I am quite surprised how low cutoff
voltage is set. Usually 3.6V is considered absolute end for LiPo and 3.7 is
usually considered optimal end point from the battery lifetime point of
view. Under load voltage is probably lower but DAP is not taking that much
current. So my question - what are rationale of setting cutoff point at 3.38
V?

Marcin Bukat
Received on 2009-12-01