[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.14 (changzez@hibyserver) (gcc version 4.7.2 (Ingenic 2015.02) ) #1 PREEMPT Fri Dec 8 16:13:47 CST 2023 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 RESET ERROR PC:7EEFFD9E [ 0.000000] CPU0 revision is: 2ed1024f (Ingenic Xburst) [ 0.000000] FPU revision is: 00330000 [ 0.000000] CCLK:1008MHz L2CLK:504Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 004d8000 @ 00010000 (usable) [ 0.000000] memory: 00038000 @ 004e8000 (usable after init) [ 0.000000] User-defined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 804e6750, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] Primary instruction cache 16kB, 4-way, VIPT, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS2,115200n8 mem=32M@0x0 no_console_suspend lpj=5009408 ip=off init=/linuxrc ubi.mtd=4 root=ubi0:rootfs ubi.mtd=5 rootfstype=ubifs sn_no=00000000000000000000000000000000 bt_mac=xxxxxxxxxxxx wifi_mac=xxxxxxxxxxxx rw [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Memory: 26628k/32768k available (3833k kernel code, 6140k reserved, 1126k data, 224k init, 0k highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 [ 0.000000] clockevents_config_and_register success. [ 0.000000] Console: colour dummy device 80x25 [ 8.443005] Calibrating delay loop (skipped) preset value.. 1001.88 BogoMIPS (lpj=5009408) [ 8.445582] pid_max: default: 32768 minimum: 301 [ 8.447321] Mount-cache hash table entries: 512 [ 8.449629] Initializing cgroup subsys devices [ 8.451095] Initializing cgroup subsys freezer [ 8.452476] Initializing cgroup subsys blkio [ 8.457551] regulator-dummy: no parameters [ 8.459138] NET: Registered protocol family 16 [ 8.477518] bio: create slab at 0 [ 8.480522] jz-dma jz-dma: JZ SoC DMA initialized [ 8.482038] gpio_regulator_init [ 8.483049] [gpio_sw_regulator] gpio_regulators_probe [ 8.484620] num_regulators =1 [ 8.485547] pdata->regulators[0].name =GPIO_BT_PWR,86 [ 8.487131] gpio_request GPIO 86 , name GPIO_BT_PWR [ 8.488727] gpio_regulator_gpio_init 0 [ 8.490139] GPIO_BT_PWR: no parameters [ 8.491390] [gpio_sw_regulator] regulator:"GPIO_BT_PWR" init success [ 8.493935] SCSI subsystem initialized [ 8.495272] usbcore: registered new interface driver usbfs [ 8.497018] usbcore: registered new interface driver hub [ 8.498940] usbcore: registered new device driver usb [ 8.500819] (null): set:999 hold:1000 dev=100000000 h=2000 l=2000 [ 8.503122] (null): set:249 hold:250 dev=100000000 h=500 l=500 [ 8.505197] AXP add mfd driver = 0 [ 9.212513] sa ok [ 9.213236] Advanced Linux Sound Architecture Driver Initialized. [ 9.215772] Bluetooth: Core ver 2.16 [ 9.216959] NET: Registered protocol family 31 [ 9.218336] Bluetooth: HCI device and connection manager initialized [ 9.220421] Bluetooth: HCI socket layer initialized [ 9.221941] Bluetooth: L2CAP socket layer initialized [ 9.223548] Bluetooth: SCO socket layer initialized [ 9.225227] gpio_request GPIO 62 , name TCS1421_CFG1 [ 9.226947] [AXP-MFD] axp_mfd_probe [ 9.228028] [AXP-MFD] axp_init_chip [ 9.229549] axp_mfd 2-0034: AXP (CHIP ID: 0x03) detected [ 9.234487] [AXP-MFD] register regultors [ 9.236399] [AXP-MFD] register power supply [ 9.237971] Switching to clocksource jz_clocksource [ 9.239830] FS-Cache: Loaded [ 9.247623] jz-dwc2 jz-dwc2: regulator vbus get error [ 9.249263] DWC IN OTG MODE [ 9.401649] dwc2 dwc2: Keep PHY ON [ 9.402705] dwc2 dwc2: Using Buffer DMA mode [ 9.404044] dwc2 dwc2: Core Release: 3.00a [ 9.405366] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller [ 9.407340] dwc2 dwc2: new USB bus registered, assigned bus number 1 [ 9.410263] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.412393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.414658] usb usb1: Product: DesignWare USB2.0 High-Speed Host Controller [ 9.416839] usb usb1: Manufacturer: Linux 3.10.14 dwc2-hcd [ 9.418560] usb usb1: SerialNumber: dwc2 [ 9.420370] hub 1-0:1.0: USB hub found [ 9.421561] hub 1-0:1.0: 1 port detected [ 9.423091] dwc2 dwc2: DWC2 Host Initialized [ 9.424987] dwc2 dwc2: enter dwc2_gadget_plug_change:2690: plugin = 1 pullup_on = 0 suspend = 0 [ 9.427957] axp_ldo1: 1250 mV [ 9.431760] axp_ldo2: 1800 <--> 3300 mV at 3300 mV [ 9.436217] axp_ldo3: 1800 <--> 3300 mV at 2500 mV [ 9.439800] axp_ldo4: 1800 <--> 3300 mV at 3300 mV [ 9.444022] axp_buck1: 700 <--> 3500 mV at 3300 mV [ 9.448508] axp_buck2: 700 <--> 2275 mV at 1200 mV [ 9.452637] axp_buck3: 700 <--> 3500 mV at 1800 mV [ 9.455771] axp_buck4: 700 <--> 3500 mV at 1800 mV [ 9.458388] axp_ldoio0: 1800 <--> 3300 mV at 2800 mV [ 9.462869] charging current = 800 mA [ 9.476601] NET: Registered protocol family 1 [ 9.478595] 359,init_ddr_proc [ 9.486846] NTFS driver 2.1.30 [Flags: R/O]. [ 9.488485] fuse init (API version 7.22) [ 9.490379] exFAT: Version 1.2.9 [ 9.491588] msgmni has been set to 52 [ 9.495756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 9.498077] io scheduler noop registered [ 9.499301] io scheduler deadline registered [ 9.501031] io scheduler cfq registered (default) [ 9.502781] gpio_request GPIO 46 , name lcd power [ 9.504311] gpio_request GPIO 45 , name lcd rst [ 9.505777] gpio_request GPIO 89 , name BL PWR [ 9.507261] pwm-backlight pwm-backlight.0: unable to request PWM, trying legacy API [ 9.511588] jz-fb jz-fb: Frame buffer size: 307200 bytes [ 9.514877] jz-uart.0: ttyS0 at MMIO 0x10030000 (irq = 59) is a uart0 [ 9.517137] jz-uart.2: ttyS2 at MMIO 0x10032000 (irq = 57) is a uart2 [ 9.520929] console [ttyS2] enabled, bootconsole disabled [ 9.532616] register vprivilege driver OK! Major = 252 [ 9.538049] register vprivilege driver OK! Major = 251 [ 9.543829] gpio_request GPIO 83 , name bt_reg_on [ 9.550510] nand_magic=0x0error in read magic [ 9.555130] sfcnand num=9 [ 9.557842] Scanning device for bad blocks [ 9.649093] Creating 6 MTD partitions on "sfc_nand": [ 9.654253] 0x000000000000-0x000000080000 : "uboot" [ 9.659955] ftl_cs: FTL header not found. [ 9.664769] 0x000000080000-0x000000300000 : "logo" [ 9.670770] ftl_cs: FTL header not found. [ 9.675558] 0x000000300000-0x000000900000 : "kernel" [ 9.681738] ftl_cs: FTL header not found. [ 9.686464] 0x000000900000-0x000001000000 : "recovery" [ 9.692882] ftl_cs: FTL header not found. [ 9.697602] 0x000001000000-0x000005000000 : "rootfs" [ 9.703832] ftl_cs: FTL header not found. [ 9.708622] 0x000005000000-0x000008000000 : "data" [ 9.714684] ftl_cs: FTL header not found. [ 9.719700] usbcore: registered new interface driver usb-storage [ 9.726131] usbcore: registered new interface driver usbserial [ 9.732261] usbcore: registered new interface driver usbserial_generic [ 9.739024] usbserial: USB Serial support registered for generic [ 9.745709] gpio_request GPIO 55 , name ring1_gpio [ 9.751041] gpio_request GPIO 56 , name ring2_gpio [ 9.756436] input: sa-ring-keys as /devices/platform/sa-ring-keys/input/input0 [ 9.764720] jz-rtc jz-rtc.0: rtc core: registered jz-rtc as rtc0 [ 9.771815] Bluetooth: HCI UART driver ver 2.2 [ 9.776400] Bluetooth: HCI H4 protocol initialized [ 9.781374] Bluetooth: HCI BCSP protocol initialized [ 9.786492] Bluetooth: HCILL protocol initialized [ 9.791493] jzmmc_probe,1864 pdata=81868f80 [ 9.795884] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing [ 9.801742] jzmmc_gpio_init 1753 card_gpio->cd.num =43 [ 9.807054] gpio_request GPIO 42 , name mmc_power [ 9.822377] drivers/mmc/host/jzmmc_v12.c,jzmmc_power_on,355 [ 9.828128] drivers/mmc/host/jzmmc_v12.c,jzmmc_power_on,376 [ 9.833943] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0 [ 9.839767] drivers/mmc/host/jzmmc_v12.c,set_pin_status,312,pin->num =42 [ 9.846677] drivers/mmc/host/jzmmc_v12.c,set_pin_status,322,pin->num =42,enable=1 [ 9.989554] jzmmc_v1.2 jzmmc_v1.2.0: register success! [ 9.995169] usbcore: registered new interface driver usbhid [ 10.000982] usbhid: USB HID core driver [ 10.005162] sa_information_init success [ 10.009462] usbcore: registered new interface driver snd-usb-audio [ 10.016540] jz-asoc-dma jz-asoc-aic-dma: Audio dma platfrom probe success [ 10.023663] jz-asoc-dma jz-asoc-pcm-dma: Audio dma platfrom probe success [ 10.031317] jz-asoc-aic jz-asoc-aic: Aic core probe success [ 10.037275] jz-asoc-aic-i2s jz-asoc-aic-i2s: i2s platform probe success [ 10.044410] jz-asoc-pcm jz-asoc-pcm: pcm platform probe success [ 10.059978] SWITCH: init OK [ 10.063890] dma dma0chan4: Channel 4 have been requested.(phy id 3,type 0x06 desc a19fb000) [ 10.082394] ingenic-erosq ingenic-erosq.0: es9018_k2m-hifi <-> jz-asoc-aic-i2s mapping ok [ 10.091435] dma dma0chan2: Channel 2 have been requested.(phy id 5,type 0x20 desc a19fe000) [ 10.109902] ingenic-erosq ingenic-erosq.0: es9018_k2m-hifi <-> jz-asoc-pcm mapping ok [ 10.119182] gpio_request GPIO 40 , name hp mute [ 10.124130] gpio_request GPIO 38 , name po pwr [ 10.128889] gpio_request GPIO 47 , name lo mute [ 10.133760] gpio_request GPIO 41 , name lo pwr [ 10.138521] gpio_request GPIO 44 , name dac mute [ 10.143481] gpio_request GPIO 53 , name spdif pwr [ 10.148510] gpio_request GPIO 37 , name out select [ 10.153795] NET: Registered protocol family 17 [ 10.158652] Bluetooth: RFCOMM TTY layer initialized [ 10.163879] Bluetooth: RFCOMM socket layer initialized [ 10.169182] Bluetooth: RFCOMM ver 1.11 [ 10.173094] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.178570] Bluetooth: BNEP filters: protocol multicast [ 10.183984] Bluetooth: BNEP socket layer initialized [ 10.189102] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 10.195232] Bluetooth: HIDP socket layer initialized [ 10.202937] [gpio_sw_regulator] gpio_reg_is_enabled, regulator:[GPIO_BT_PWR] is 0 [ 10.211357] UBI: attaching mtd4 to ubi0 [ 10.358286] UBI: scanning is finished [ 10.368902] UBI: attached mtd4 (name "rootfs", size 64 MiB) to ubi0 [ 10.375463] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 10.382484] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 10.389392] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 10.396499] UBI: good PEBs: 512, bad PEBs: 0, corrupted PEBs: 0 [ 10.402623] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 10.410001] UBI: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 1920859798 [ 10.419325] UBI: available PEBs: 0, total reserved PEBs: 512, PEBs reserved for bad PEB handling: 20 [ 10.428768] UBI: background thread "ubi_bgt0d" started, PID 38 [ 10.434845] UBI: attaching mtd5 to ubi1 [ 10.545789] UBI: scanning is finished [ 10.556092] UBI: attached mtd5 (name "data", size 48 MiB) to ubi1 [ 10.562473] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 10.569469] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 10.576396] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 10.583505] UBI: good PEBs: 384, bad PEBs: 0, corrupted PEBs: 0 [ 10.589629] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 10.596985] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3430372791 [ 10.606330] UBI: available PEBs: 0, total reserved PEBs: 384, PEBs reserved for bad PEB handling: 20 [ 10.615773] UBI: background thread "ubi_bgt1d" started, PID 39 [ 10.622156] file system registered [ 10.626965] using random self ethernet address [ 10.631691] using random host ethernet address [ 10.636647] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 10.643818] android_usb gadget: Number of LUNs=1 [ 10.648581] lun0: LUN: removable file: (no medium) [ 10.654135] android_usb gadget: android_usb ready [ 10.659887] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 10.667289] jz-rtc jz-rtc.0: setting system clock to 2024-10-10 17:21:17 UTC (1728580877) [ 10.675847] ALSA device list: [ 10.678909] #0: erosq [ 10.684580] UBIFS: background thread "ubifs_bgt0_0" started, PID 42 [ 10.747035] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 10.753323] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 10.762762] UBIFS: FS size: 60567552 bytes (57 MiB, 477 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 10.772733] UBIFS: reserved for root: 0 bytes (0 KiB) [ 10.777946] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 8904B0EE-0822-40B0-B838-0A3C1E5C7C36, small LPT model [ 10.789670] VFS: Mounted root (ubifs filesystem) on device 0:11. [ 10.797047] Freeing unused kernel memory: 224K (804e8000 - 80520000) [ 10.922607] mmc0: new high speed SDXC card at address aaaa [ 10.929203] mmcblk0: mmc0:aaaa SN512 476 GiB [ 10.938501] mmcblk0: p1 [ 11.291930] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 11.308939] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 11.471366] UBIFS: background thread "ubifs_bgt1_0" started, PID 76 [ 11.544814] UBIFS: mounted UBI device 1, volume 0, name "data_vol" [ 11.551282] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 11.560760] UBIFS: FS size: 44441600 bytes (42 MiB, 350 LEBs), journal size 2285568 bytes (2 MiB, 18 LEBs) [ 11.570752] UBIFS: reserved for root: 2099086 bytes (2049 KiB) [ 11.576771] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0EE27186-4B10-44B6-9795-0AD54014A6CC, small LPT model [ 12.016240] [gpio_sw_regulator] gpio_reg_is_enabled, regulator:[GPIO_BT_PWR] is 0 [ 12.026836] [gpio_sw_regulator] gpio_reg_enable, regulator: GPIO_BT_PWR [ 12.052491] graphics fb0: open count : 1 [ 12.069611] gpio_request GPIO 58 , name rtc32k [ 12.091707] jz-fb jz-fb: the slcd slcd_cfg_new is 00000200 [ 18.754123] android_usb: already disabled [ 18.760194] adb_bind_config [ 18.834286] adb_open [ 24.012137] dwc2 dwc2: SRP: Device Mode [ 24.249630] DWC USB connect [ 24.252545] dwc2 dwc2: enter dwc2_gadget_plug_change:2690: plugin = 1 pullup_on = 1 suspend = 0 [ 24.467063] android_work: sent uevent USB_STATE=CONNECTED [ 27.458872] android_usb gadget: high-speed config #1: android [ 27.465578] android_work: sent uevent USB_STATE=CONFIGURED