Rockbox

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bugs
  • Category Bootloader
  • Assigned To No-one
  • Operating System Another
  • Severity Low
  • Priority Very Low
  • Reported Version Version 3.3
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: Rockbox
Opened by Eric Jorgensen - 2009-07-10

FS#10427 - MR-100 requires reset if the hold switch is engaged after turn-on but before rockboot loads

This isn't a big problem because the MR-100 won't turn on if the hold switch is already engaged.

But if the user turns on the MR-100 and then engages the hold switch while the M:Robe logo is on the screen, a "Hold switch is on Shutting down…" message is displayed, but it does not shut down.

A reset is required at this point - disengaging the hold switch and holding down the power button in this state does not shut down the MR-100.

Dominik Riebeling commented on 2011-06-05 09:51

I can confirm this issue. Bootloader hangs with "Shutting down" message.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing