Rockbox

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bugs
  • Category Bootloader
  • Assigned To No-one
  • Operating System Sansa e200
  • Severity Low
  • Priority Very Low
  • Reported Version Daily build (which?)
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: Rockbox
Opened by Jens Erdmann - 2011-02-02

FS#11919 - No SD-Card support in USB mode after boot

I got no SD-Card support for my E-250 after boot into USB mode.
I plug in my powered off player into usb and only have access to internal storage.

If i plug in my player booted up there is no problem.

I am using daily build r29174-110131.

Jens Erdmann commented on 2011-02-03 10:46

I missed to mention that the usual usb screen is missing and some system information are shown.

Dominik Riebeling commented on 2011-06-05 11:40

I cannot reproduce this issue. Which bootloader version do you have installed? Does this work with a different SD card? Which OS does the PC run?

Jens Erdmann commented on 2011-07-14 14:38

I was a bit lazy so i made a picture. And i attached a dump from lsusb. I was using debian unstable and a bleeding edge rockbox + bootloader.

Jens Erdmann commented on 2011-07-14 22:34

Same behavior with Windows 7.
The device is a e250.

Michael Chicoine commented on 2011-07-15 14:28

The svn bootloader now has USB support for the internal storage only, not for the microSD card. To access the microSD, you need to connect the USB cable after Rockbox is booted.

It has been suggested that the bootloader USB mode be activated by a key-press, since it is meant to be used for recovery. Because most users are using the release version of the bootloader, this has not been a priority. I have been using a bootloader patched this way for some time. If I have time this weekend, I will push this change to svn.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing