Rockbox

  • Status Closed
  • Percent Complete
    100%
  • Task Type Patches
  • Category Settings
  • Assigned To No-one
  • Operating System
  • Severity Low
  • Priority Very Low
  • Reported Version
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: Rockbox
Opened by takka - 2005-12-07
Last edited by takka - 2006-01-23

FS#2809 - H1x0 or H3x0 select remote patch

set option
option→Generl Settings→Disply→Remote LCD Settings-
>Remote type

H100 or H300 LCD or H300 non LCD or OTHER

but I have H300.
You need rewrite key table.

Closed by  Nils Wallménius
2006-11-03 08:19
Reason for closing:  Out of Date
Additional comments about closing:  

Remotes for the iriver hxxx are automatically detected an hence this patch is no longer needed.

takka commented on 2005-12-07 20:08

It wrote and it made a mistake.
I have ‘NOT’ H300

takka commented on 2005-12-12 05:15

H3x0 Standard remote control can have been used.

takka commented on 2005-12-15 01:23

bug fix

Anonymous Submitter commented on 2005-12-15 21:44

Thanks for the patch! I have 2 questions:

I couldn’t get to the menu with the H300 LCD Remote, is it
possible?

why don’t you set the H300 Remote arrow keys
(up,down,left,right) to operate as they on the main unit? I
think it’s more convenient.
Idan

takka commented on 2005-12-16 02:27

bug fix

takka commented on 2005-12-16 02:30

It corresponded only at the mode
It was made to correspond to the file tree mode this time
Please use tree.patch

It has not corresponded to config mode yet.

takka commented on 2005-12-16 02:34

It corresponded only at the ‘WPS’ mode
It was made to correspond to the file tree mode this time
Please use tree.patch

It has not corresponded to config mode yet.

perplexity commented on 2005-12-17 07:51

My H340 with Non-LCD remote never deviates from 0xFF for
ADC_REMOTE, no matter what combination of buttons I try.
With or without the remote plugged in.
With the remote plugged in it _always_ shows as hold enabled
on the remote. I have tried selecting all the available
remote types (but of course H300_non_LCD is the one I try to
use)

Enough to say the remote does not work :)
In fact, the only thing it does do is the play button on the
remote toggles GPIO1_READ 0×40. (reads 0xXXXXXX74 unplugged
or plugged and 0xXXXXXX34 with play pressed)

takka commented on 2005-12-17 18:28

H300 NON LCD hold disable

takka commented on 2005-12-17 18:31

bug fix

Anonymous Submitter commented on 2005-12-18 17:01

H300 LCD Remote:
in tree view, can you replace the keys:
vol up ↔ right(forward)
vol down ↔ left(backward)
so it will be like the main navi buttons ?

thanks,
Idan

takka commented on 2005-12-19 13:57

use ‘tree.patch’

replace rc keys
vol up ↔ right(forward)
vol down ↔ left(backward)

Anonymous Submitter commented on 2005-12-21 08:17

h340 with non-lcd remote and both patches applied :

Well, now the hold switch does not work. (expected)

The vol+/- buttons change the track playing, and the «|» buttons change the volume :)

But at least it *does* something :)

perplexity commented on 2005-12-21 08:25

Hrm… forgot to log in below :)

Ok.. Now the hold is disabled my ADC_REMOTE values change
properly. Here are the ADC values for my h300-non-lcd remote

Idle : 0xFF (Unplugged or no button pressed)
Vol + : 0xE4
Vol - : 0xC8
«| : 0×33 (skip back)

HOLD : 0×00

perplexity commented on 2005-12-21 18:05

Hrm… forgot to log in below :)

Ok.. Now the hold is disabled my ADC_REMOTE values change
properly. Here are the ADC values for my h300-non-lcd remote

Idle : 0xFF (Unplugged or no button pressed)
Vol + : 0xE4
Vol - : 0xC8
«| : 0×33 (skip back)

HOLD : 0×00

perplexity commented on 2005-12-21 19:35

Revised version of this patch with the tree.patch rolled in,
tested and working on my h340 with non-lcd-remote

https://sourceforge.net/tracker/index.php?func=detail&aid=1387447&group_id=44306&atid=439120

I would have just attached it here, but I can’t seem to
figure out how to do that.

takka commented on 2005-12-21 22:49

bug fix

takka commented on 2005-12-21 22:50

bug fix

takka commented on 2005-12-26 14:26

bug fix & marge patch

‘thanks bkc1974’

takka commented on 2006-01-23 15:11

for 1/23 CVS

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing