FS#9202 - iriver H300 bootloader power/usb fixes

Attached to Project: Rockbox
Opened by Matthew Haun (massiveH) - Wednesday, 16 July 2008, 23:38 GMT
Task Type Patches
Category Bootloader
Status Unconfirmed
Assigned To No-one
Operating System Iriver H300 series
Severity Low
Priority Normal
Reported Version Daily build (which?)
Due in Version Undecided
Due Date Undecided
Percent Complete 0%
Votes 0
Private No


This patch changes the iriver H300 series bootloader's power and usb handling. When a USB or Power plug are inserted into the H300, it will now boot as normal, not stop in the bootloader usb/charging modes. This was mainly for use in my car, but is also helpful for people with charging cradles for their computers.

Forum thread can be found here
This task depends upon

Comment by Matthew Haun (massiveH) - Thursday, 04 September 2008, 19:04 GMT
This v2 of the patch now conforms to the rockbox standard (I hope).

When you plug a power cord or a USB cable into your H3x0 player, it will boot normally (even if hold is on). To get the old functionality of the bootloader ("Charging Bootloader" and "USB Bootloader") you need to hold the mode (A-B) button when plugging in the power or USB cord.
Comment by Jason Bolger (galapogos01) - Tuesday, 09 December 2008, 00:58 GMT
Great work, I did something similar myself the other day (I hadn't found this).

I wanted to use the NVRAM setting for the Car Adaptor Mode in my logic but it appears the bootloader cant use any of those functions.