Hi,

I think that the problem reported on  FS#10919  is still here, or at least not completely solved.
But now, I get the feeling that the pause only happens when the buffer refill is triggered via a track skip. During normal playback, it don't seem to happen any more.

The build I tried it on is r25249.

TIA

H120 not starting original IRiver Firmware with LCD Remote holding Rec + Play Button both on LCD-Remote.

sansa fuze v1 scroller doesn’t obey ‘first button press enables backlight only’

rockbox 3.5.1

This is a reopening of issue  FS#7354  (quoted below) related to playback problems involving cuesheet support and flac files (labelled #1 in the original post). Jumps to certain positions in flac file according to the cuesheet fail consistently.

The bug is extensivelly described in the original report and can be easily reproduced in current versions. I reproduced it in many situations with the following configuration:

Equipment used: Cowon D2 and Cowon D2 simulation
Rockbox version: tested on r25508-100407 and r24777-100219 (simulation)
Rockbox settings: Cuesheet support ON, other on default
FLAC files: Ripped form my original CDs with EAC (to WAV and cuesheet) in secure mode and processed with FLAC 1.12 and/or 1.14 compression level 8. MD5 checksums on cuesheets and FLACS checked. Cuesheet syntax OK, cuesheet file encoding UTF8-DOS and/or DOS. Works properly my on computer.

Quote of the original post

When Playing with rockboy on sansa e200 V1 , Rom that have a size of more than 1m Bug and Rockbox often shutdown. And even if these roms run, the speed isn't playable.

installed rockbox and doom (freedoom) all correctly. but problem is that the navigation keys dont work when the game starts. cant move. but i can bring up pause menu by flicking hold on then off but then only up(menu button) works in addition to the center button being able to select

to reproduce:install latest build for ipod classic 5th gen 30gb
install doom from the rockbox utilities program
run doom in ipod
game loads
face at bottom of screen moves, showing it isnt frozen… cannot move

and yes i have tried configuring the keys, it doesnt work

On Gogear sa9200, when hold is switched to off(means in the middle), the play stops.
Maybe because the hold and the on/off share the same swtich.

When the battery is nearly empty and the iriver H10 is about to shutdown, the volume sometimes suddenly increases progressively, as if the volume UP button was pressed and held down, all the way up to the maximum.

This has happened to me about 3-4 times so far. Pressing the volume DOWN button somewhat counters this bug, but only for as long as the DOWN button is used - the volume keeps increasing.

This occurs with Rockbox Release 3.5 (not 3.4 as the Report Version field of the ticket says).

A mixed RTL with LTR text appears in a missed order not conforming to bidi logical to visual algorithm of unicdoe.

Implementation is ready in bidi_l2v() , but the “orientation” parameter is hardcoded and passed as “1” always

A suggested solution is either pass “orientation” as 0 for any RTL text, or tie the orientation parameter with the “alignment” option of the text viewer.

Seen with r27199 on the e200 simulator.

If I place a .wps file in the root directory and “play” it from the file browser, the WPS is not loaded. I’d expect it to load but not to be saved as the setting.

The same file is loaded if it’s in the directory /.rockbox/wps, i.e. it’s not the wrong file contents that’s causing the error.

ONDA VX777
While in FM-Radio it isn’t possible to change the volume value, nor from the context menu, nor from the virtual 3×3 touch screen grid and nor from the .fms %T tag in absolute mode.

when the FM tuner is turned on and say that you want to go to Add a Preset you cannot hear thevoice over the radio. this should be controlled where the Fm volume is turned down and the volume of the voice is turned up just like in playing regular music.

A couple of config file options are missing from the manual appendix:

e.g.

backlight fade in: 2000
backlight fade out: 10000

The following set of WPS tags demonstrates:

# WPS Document
%wd
%V(0,0,-,10,2)%Vb(000000)%Vf(FFF000)
%aL%cH:%cM %ac%pv %aR%bt
%V(0,11,-,30,2)%Vb(000000)%Vf(FFF000)
%it

If you alternately insert and remove a space between the second occurence of %Vb/%Vf, the track title text appears and disappears. It appears to happen in a few other variations, but this is the shortest concrete example.

While playing doom, I can definitely read the amount of ammo, shield status, and health of my character. However, I cannot read the messages like you need the key first to open this door. Also, if you set the screen size to the maximum and turn on the heads up display the font there is also illegible.

sometimes when i click on next(or previous) button a couple of times , rockbox gets stuck and then anfter 3 or 4 secs ,it restarts .then when loaded the battery is empty.
i am not sure if this is a rockbox related issue or hardware realated cause i use my ipod for file transfer mainly .and this issue existed from version 3.3 till now( i cont know or remember about before that).

is there a way that i can somehow debug (trace) this issue?

Hi!

I’ve found very important bug in Rockbox 3.7, witch my be dangerous for both the player and the memory card (if present).
It turned out that Rockbox doesn’t react to very low battery level while voice or FM radio is recorded. It causes damage to the recorded file when finally hardware falls due to lack of energy. This corrupted file is absolutely unreadable.

I think I have experienced a bug in 3.7+ builds with WPS themes related to %Vf.
If you put the %Vf on a new line, the following text is displayed, then cleared, but only if its a scrolling line, if the first line is static it is displayed properly, and subsequent lines are also displayed properly even if they are scrolling

example:

%Vl(b,0,108,176,60,1)
%Vf(999999)
%s%ac%?Ia<%Ia|>
%s%ac%?It<%It|%Fn>

artist is displayed briefly then cleared, if you take out %s artist is displayed properly, if you put the %Vf on the same line with %vl artist is displayed properly with scrolling, if you put a static text line before the first %s line then all lines are displayed properly.

so my quick fix is to just move the %vf on the line with %vl, but this bug probalby breaks many WPS, also this worked before 3.7, not sure when it stopped working. Tested this bug with latest build:r28534-101108 and 3.7 release sansa e200 v1. (also with latest e200 simulator)

this bug was not in builds up to or prior to: r27944-100830

(./version.tex)) [2] [3]
1.

Class scrreprt Warning: \float@addtolists
You should use the features of package
instead of
Support for \float@addtolists may be removed
`scrreprt’ soon .

This is the warning text I get. We should probably update the syntax before it get broken.

URGENT/HIGH PRIORITY: Rockbox Firmware 3.7 installed with iRiver H300 1.29J.

Charging when in Rockbox mode (player switched on):

When Rockbox is running and the charger is plugged in, Rockbox can be seen charging the battery in the top left hand corner. When it is fully charged, it shows a full battery.

Charging when iRiver is powered off (player switched off):

When the charger is plugged in, the iRiver begins charging in Original Firmware mode. This is okay as the player charges correctly until Complete.

Booting into OF mode, shows a full battery charge so I can be sure it is fully charged.

However, boot back into Rockbox mode and Rockbox seems to be misreporting the battery charge as depleted - I say misreporting because at this point I know it is actually full/complete. (Booting back into OF mode would also confirm again at this point that there is indeed a full battery charge).

But run Rockbox 3.7 and after a few minutes, a false message - "Low Battery - Shutting Down" appears, after which Rockbox powers off.

I know this is inccorect, because if the battery was so low in OF, the iRiver OF would not even allow you to attempt to power back on (instead it would display a "Low Battery" picture on the display), but I can boot back into OF mode easily with no problems even after this message from Rockbox, again the OF shows a full battery and I can run it for hours with no problem so I know somewhere here there must be a miscommunication/misreading from the battery charge to the Rockbox 3.7 firmware.

Have tested this a number of times to ensure it is a fault and yes it presents itself everytime.

When a WPS defines a touch area combining %T and setting_inc or setting_dec, although the themesite parser does not show any problems and allows the theme to be loaded normally, the themesite doesn't display the theme. Some examples to be found in this forums thread : http://forums.rockbox.org/index.php?topic=25098.msg173725#msg173725

I've tried a dozen of builds around, and it seems that the new touchscreen on D2+ is not working properly - there're wild distortions (sometimes it's possible to press a button on lower bottom of the panel, but usually it's to no effect at all) at the edges of panel - i have to press almost on the edge of panel in order to tap the buttons, for instance in this (http://themes.rockbox.org/index.php?themeid=1146&target=cowond2) theme.

This appears to happen only on the simulator, as of r29012.

Fill a directory with, say, some .s3m files and .mod files. Mikmod plugin chokes on calloc (virtch.c, line 1227) during MikMod_Init() sequence.

Remove the .mod files and the plugin loads and works properly.

Reverting the change made to viewers.config in r29012 seems to fix this. I'm guessing the problem is somehow related to the way mod is both playable and viewable, but there's nothing obviously wrong with viewers.config that I can see. Maybe the buffers are getting screwed up somewhere in filetypes.c?

When plugging in an AC USB charger, the ipod shows rockbox's disk mode instead of just changing the "external power" icon. Is it possible to make it detect if a charger is connected, or an usb host (for example, a computer)?

Doing the same test (with the same charger) on an ipod color/4g shows the expected result (not going to usb mode, just a charger icon appears)

I suspect this bug has appeared since r29333, r29341, r29342 but I'm not 100% sure, it worked fine a few days back.

When I delete a file it goes well, but after I delete a file after first switching to another application or to the Android main screen deleting a file locks the main screen, it also locks up for other Android native screens like the keyboard you get when you create a directory.

I use Android 2.1 on a Cowon D3 device.

The interface of my Sansa Fuze and the file transfer freeze randomly when transferring large amounts of data. If the player runs in Bootloader USB mode everything is fine.

I guess this could break the vfat file system, making this a nasty bug. Disabling Key and Mouseemulation did not help. As long as this isn't fixed, a solution would be to start the player in Bootloader USB mode by default. I don't know if this is possible though, since I don't know the the technical details of rockbox very well.

Beside that everything works just great, keep up the good word!

PS.: I'm using Debian with different kernels. I couldn't see any differences between different kernel versions regarding this issue. Intels Linux USB drivers and the Linux USB stack in general usually work excellent as far as I know, therefore I would blame it on rockbox (no offense :)).

recent %Tl and %T changes need adding to the manual… didnt want to fiddle with the table.

The change is now that both those tags accept as their first param a label which links them.

%T(foo, 0,50,25,25, volup)
%?Tl(foo, 1)<helllo|goodbye>

So that conditional will only go true when that foo region is pressed. the label is optional on both, if it is missing on the %Tl then it acts as now (timeout since last press on anywhere on the screen)

If I set my Gigabeat F20 touchpad sensitivity to High, the touchpad and all buttons stop working - except for the long POWER action which shuts down in the normal manner.

I then need to reset settings on boot (or connect to a PC and edit them) to restore usability.

If other owners could try this out, I'd be interested - it may be that I have a stuck button under the touchpad, of course.

I’m using revision 29572 of android port. Host system is Samsung Galaxy 3 i5800, with 240×400 resolution display, with version 2.2 (Froyo) of Android.

The problem is as follows. When trying to start playback of OGG or SPX files, the playback does not start occasionally (the change is maybe less than 20% to have playback). By rewinding randomly it is possible to get it start playback. The same behaviour occurs when starting from bookmarks and from file explorer. The problem occurs with default config file.

Tried with MP3 and had the same problem. The problem may be with other codecs as well but I have not tried it so extensively.

Best

Hello,

empty menu items crash rockbox due to NULL pointer access.
Easily reproducable with the "LCD settings" in RaaA / SDL app build.

The resulting valgrind trace looks like this:
==22619== Invalid read of size 4
==22619== at 0x407FDA: do_menu (menu.c:555)
==22619== by 0x41B198: miscscrn (root_menu.c:323)
==22619== by 0x41B377: load_screen (root_menu.c:520)
==22619== by 0x41B72A: root_menu (root_menu.c:688)
==22619== by 0x406DFA: main (main.c:196)
==22619== Address 0x0 is not stack'd, malloc'd or (recently) free'd

Question:
Should we protect against "menu→submenus" being NULL or
should the menu system hide empty menus without any items at all?

Cheers,
Thomas

Scrolling the scrollwheel doesn't count as a button press for the Textviewer plugin's idle Timeout.

Hi,

the random_folder_advance_config plugin fails to build the
folders on N900 / RaaA. I guess it suffers from the same
as the database update did in the past: It probably follows
starts over and over again in the /proc or /sys filesystem.

- iaudio
both with 3.8 and build r29635

since 3.8 after a while the display blanks totally, no gui. only restarting the device makes it available again for a short
screen, navigation is basically impossible.

While in the fm radio screen, a ticking noise can be heard in the background. When pressing the power button in the radio screen the noise disappears.

Tested at r29689, gcc 3.4.4. When trying to create a voice file in Cygwin, the following comes out (taken from STDERR):
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x453): undefined reference to `_speex_nb_mode'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x45a): undefined reference to `_speex_wb_mode'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x462): undefined reference to `_speex_encoder_init'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x490): undefined reference to `_speex_bits_init'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x4b9): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x4d9): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x4f6): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x513): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x527): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x5fd): undefined reference to `_speex_resampler_init'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x609): undefined reference to `_speex_resampler_skip_zeros'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x6ac): undefined reference to `_speex_resampler_process_int'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x6fc): undefined reference to `_speex_encode_int'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x724): undefined reference to `_speex_bits_write_whole_bytes'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x7c0): undefined reference to `_speex_bits_write'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x81d): undefined reference to `_speex_encoder_destroy'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x829): undefined reference to `_speex_bits_destroy'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x83d): undefined reference to `_speex_resampler_destroy'
collect2: ld returned 1 exit status
make[2]: * [../rbspeexenc] Error 1
make[1]: * [rbspeexenc] Error 2
make: *** [voicetools] Virhe 2

As Title says when transferring large files the player unmounts . Does not occur in ofw.

Data abort
at 30053884
(domain0, fault8)
address 0xA00000BF

is what the player says upon unmounting.

This occurs on Stable 3.8.1 and all builds currently up to Tuesday, May 10, 2011 (r29850-110510).

When my iPod 3G is powered on with no song in the queue to be resumed, and the "resume Playback" item is selected, the screen flickers, the quick glimpse of the selected Now Playing theme can be seen (for me, DancePuffDuo, but also confirmed for every other one I've tried) and it returns me back to the Main Menu without any warning… just an abrupt return.

I've reinstalled stable as well as various builds leading up to the date above and all have the same effect.

The way to reproduce this bug is to Play a single song from the database that is by itself (in the artist/album category of your choosing, or, the last song in an artist/album grouping) and then, after it is done playing and returns you to the database or main menu, shut down and restart Rockbox. Select the Resume Playback item on the Main Menu. The screen should flicker and abruptly return you to the Main Menu without any warning that there is nothing to resume playing.

This bug does not reproduce with the iPod 3G simulator with 05/10/2011's build (r29850-110510).

I got this error twice in a row; once after the player had been running for a few (5-20) minutes; then I repeated my action and saw the error again. This is the text on the screen from the second occurrence (I did not write down the error text the first time; but when I tried to replicate the issue a 3rd time before submitting, I saw the same text):

Data abort
at 3001A6B0
FSR 0x8
(domain 0, fault 8)
address 0xB0153884

I had a playlist of 2255 items (created using Playlists | Create Playlist so I can just 'shuffle all').
While listening to a song (about 995/2255), I went to Database then Artist and scrolled to an artist that I knew had only one song, did a long press and selected Queue Next. The screen says 'Loading' for a couple seconds, then the music stops and I see the text above.

After the second error, I selected the artist and did the long press on the song and selected Queue Next, and did not get any error

I have a Sansa Clip, but I don't remember if it is a v1 or v2.
r29741-110417
debug | view hw info: AMSv2 variant 1

would like to report a bug in
i am shuffling through songs and set crossfade to shuffle only it still fades when i do a manual track change this does not happen when i set shuffle
should not occur as there is an option for shuffle and manual track change only, so the two options have the same functionality when i am shuffling it should be able to differentiate between
should be able to register that i have pressed next so the next song should not fade even though it is on shuffle.

Hardware: Clip+ 8GB using internal memory
Problem: Playback of most APE files results into passages of loud noise during playback. The music is totally gone and noise is ear deafening loud. When rewinding, till music is heard, and replaying the problem part, error can be reproduced _sometimes_.
In other cases it either runs fine, or the problem occurs elsewhere in the file.

Since the problem does not always occur in a specific part of a APE file, it is hard to attach a sample file.

Problem persisted between ape files encoded in high and normal setting.
Using winamp + monkey audio 3.99 APE plugin, these files never shown problems.

at least r30058
On the Sansa E280 v1 with a playback speed of 200% the playback restarts at bookmark plus about 2 seconds.

Player: iPod Video 5th Gen. (5.5)
Rockbox Release v. 3.9 downloaded/installed 06/28/2011

Accessory: Griffin iFM Radio Receiver for iPhone and iPod - has a doc connector, short cable to a "dongle" which is the FM tuner, with earphone jack on the dongle. No batteries or other power source.

Here's a link to the product's Amazon page:
http://www.amazon.com/gp/product/B003ERT46W

Booting into Apple firmware
1. Turned player on with nothing plugged in, the "Radio" menu item does not show up. Plugged in the Griffin iFM, the "Radio" menu item shows up, and when I select it, I get the FM frequency and dial, I can tune it, it works. I did not have to download anything at all from the Apple iTunes store.

2. Turned player on with iFM plugged in - the "Radio" menu item shows up, and from there it all works as above.

Booting into Rockbox OS 1. Turned player on with nothing plugged in, then plugged the iFM on the dock connector, the "FM Radio" item never shows up.

2. Turned player on with iFM plugged in, still no "FM Radio" on the menu.

3. Went into System then Debug then FM Radio - got message: "HW Detected: no"

So Rockbox does not detect it at all. And there's no sense expecting that any Apple/iTunes software would do anything under Rockbox.

What's interesting is, that with the player off (under both Apple and Rockbox OS), if I only plug in the Griffin iFM to the dock connector, and do nothing else, the player turns on. So there must be some kind of hardware detection there.

Actual behavior:

1. FM Tuner option never shows up on main menu (whether powering up with FM Tuner plugged in, or plugging in after power up).

2. When player is OFF, connecting the FM Tuner to the dock port turns on the player.

3. In System/Debug/FM Tuner, "HW Detected" is always "no"

Expected behavior:
1. Expected the FM Tuner option to be available on the main menu (at least when booting with the accessory plugged in to the dock port) as described in the manual.

2. Expecting to be able to tune in to FM stations and play at least through the tuner's headphones connector, if not through the player's headphones connector. Other features (displaying song information, presets, etc.) are secondary (to me).

When I use the "Wake Up Alarm" with the "Wake Up Screen" set to "Recording." my Nano turns on OK, but the screen starts on the FM screen. This is especially strange as there is no FM radio on this player.

I am expecting the player to turn on and start recording.

This is a 1g Nano running 3.9

Thanks.

Hi there! I'm having a huge problem with the rockbox boot on an iPod classic 5G. I've selected a number of option in the tagcache settings, such as 'load to ram', and after it readed all the files (30GB of music) ask me to reboot, and finally it freezes on the message 'saving tagcache' [1/9], responding only when i press menu+select for reboot. The same for the usb connection. I can't manipulate the files in any way!

Please excuse my limited English. Greetings from Argentina and congratulations for the fantastic project!

I downloaded some AAC files from the bbc, using the get-iplayer utility. The files play just fine on the computer, but on my rockboxed Clip+, they seem to freeze up the player entirely. I have to hold the power button for a long time to reset it. I just tried updating to rockbox 3.9, but I'm not seeing any difference with the new firmware.

When I play the file in mplayer, it gives the following info:
major_brand: M4A
minor_version: 512
compatible_brands: isomiso2
encoder: Lavf52.64.2
========================================================================Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
AUDIO: 44100 Hz, 2 ch, s16le, 48.0 kbit/3.40% (ratio: 6000→176400)
Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio))

After upgrading my 1st generation iPod Nano from Rockbox 3.6 to 3.9 the cover art display does not seem to be working consistently.

When using a playlist the first track will always show the correct cover art, but any tracks after that will continue to show the first track's cover. This also happens if I skip forward or backward between tracks in the playlist.

If I manually select a file to play the correct cover will show, and if I manually select another track during the play-back of the first the cover art will change to the new track.

I have also tried this with current build r30334 (2011-08-20T13:14:30) with the same results.

Can't set the time of day clock

started at SVN R29234 and continues to current build.
all the builds work in the simulators but break on player.
when you enter in the settings to set clock it shows correct date but shows

00:00:00

and you can change it but it will not set returns you to settings menu and you get

1. -:–:–

unknown

built fresh svn versions each time to confirm when it started

see http://svn.rockbox.org/viewvc.cgi?view=rev;revision=30461 and http://www.rockbox.org/wiki/Main/CustomWPS#Drawing_the_lists_using_a_skin and bug me on IRC when someone finds the time to add it. hopefully the wiki has enough info though - Jd

1. tested devices: Samsung Galaxy Tab 7" and Android 2.3.3 AVD
2. tested revision: custom r30556 and rasher's unmodified r30562

3. condition: goto home screen by pressing 'Home button', then return to rockbox

4. symptom : any action that calls yesno screen(rename, delete, or 'Erase dynamic playlist', etc) will make rockbox unresponsible.
The only thing I can do is go to home screen then kill rockbox service.

5. If I go to home screen from main menu by 'Back button', the problem doesn't occur.

There is something wrong on my iPod Video 5.5 with ROCKBOX 3.9.1. Because I change my ipod's HDD to Samsung's 32G ssd as my rigid disk, I can not enter my rockbox system.
Rockbox boot
leader version v 4.0
ipod version )x000B0011
ATA-82
partition 1 : 0x0B 15598843 sectors
loading Rockbox … Error!
can t load rockbox, ipod:
file not found

Is there something wrong with my new SSD? Or it is just a bug with rockbox which can not support my SSD