firmware/export/usb_ch9.h comes from linux (include/linux/usb/ch9.h) with only trivial changes. The original doesn’t mention a specific license, so it probably is GPLv2
file basically contains only structure declarations and defines for things straight from the USB specification though, so I’m not sure if there is a real problem.

When the battery is low, Rockbox is unable to charge iPod. When booting into Rockbox, the charging icon is displayed, but after a while the device shuts down.

Booting the OF and charging under it for few minutes is required.

Build 21245

I have ''Start Screen' set to 'Resume Playback'.

When connecting the Ipod (from OFF) to the PC the Ipod boots and USB mode starts but also playback (the play > sign is display on the title bar).

The Ipod is not shows and not mounted on the PC.

On disconnecting USB I get 'data abort' and have to hard reset.

Hi,
There is a problem in the Chinese voicing. It says "number, bai fen ji" (number %), but it's supposed to say "bai fen ji number) (% #). I don't know if it happens in text because I'm blind. Could this be fixed?

I navigate to any directory in the file tree, enter the context menu and set it as the recording directory. Then I go to the recording screen, cancel out immediately and return to the file tree.

There is now a new directory, in the same place as the directory I just set for recording. The new directory has exactly the same name except the final 3 letters have been removed, and it is this directory that has become the recording directory. The original directory is still there too, but now it does nothing.

The workaround is to create a bogus directory with 3 extra letters, then delete it once the bug creates the new directory with the truncated name.

I installed release 3.3 on my Sansa e260. 3.2 worked. On 3.3, volume controls work fine in normal playback mode, but when I switch to FM Radio, they are ignored. If I switch back to normal playback mode, I can set the volume level again, just not while listening to the radio.

The FM Tuner appears to be very sensitive to noise and static compared to the original firmware radio.

Apart from the static and noise the Rockbox FM Tuner sounds much clearer and sharper than the original firmware, so I wonder if this may be related to the OF using a lower sampling rate or cutting off the higher frequencies to reduce noise.

This isn't a big problem because the MR-100 won't turn on if the hold switch is already engaged.

But if the user turns on the MR-100 and then engages the hold switch while the M:Robe logo is on the screen, a "Hold switch is on Shutting down…" message is displayed, but it does not shut down.

A reset is required at this point - disengaging the hold switch and holding down the power button in this state does not shut down the MR-100.

On the Official Test Build for the Sansa Fuze, when playing Doom, in middle of playing, Rockbox gives a Data Abort Error. If it doesn't happen in middle of playing, it is always reproducible by entering the second Map. The most recent error i got is "Data Abort at 307B32D4". My Version is "r21704-090707".

It happened once just browsing through the Menu, but is only reproduced every time by playing Doom, which is why I filed it under Doom.

I will try to try a later revision and see if it fixes the bug.

In the "Scroll bar width" screen, the value used to show the width selected is the previous one, not the current one. The first value change has no effect.
Anyway it seems that the right value is stored: if you select a value and exit by the screen, when you re-enter in it, the width is correct.

Priority low.

Referred to r22406.

Steps to reproduce:

1. Start listening to a series of podcasts, say 1-5
2. After listening to >1 plug player into computer during playback of subsequent podcast
3. Delete the podcasts you have already listened to (not what your currently listening to)
4. Eject/Unplug player from computer
5. Attempt to resume playback

This fails for both resume and Recent Bookmarks functionality. I assume this is somehow tied in with playlist support as files from the playlist have been deleted.

Where does Recent Bookmarks keep it's information? Should the bookmark also keep the individual file referenced so it can resume in this case?

Tested on R21184M-090604

Will test on latest version once my main machine is back on internet.

I am running 3.4 on a 5.5G iPod modified with a 240gb drive. Rockbox is stock 3.4 with LBA48 added in and the max sector size turned off. The database was working ok on 3.3. Only issue was it took forever to add new files. After upgrading to 3.4 I noticed every time I powered on rockbox would lock up in the menus for up to 10 minutes before functioning normally. So I completely removed the .rockbox dir (including the database files of course) and re-expanded a fresh copy. I then tried to init the db. It runs until it is around ~44k files and 99% and then just sits there. If left alone it will eventually just turn it self off. When I turn it back on it will ask me to init the db again. I have seen it try to commit once or twice but it never takes. I am not really sure how to debug this at this point. Also in the debug disk info area, it things my drive is 131071MB. Under Rockbox Info it says 223GB which is better, but these two things are the same as in 3.3. All my Oggs are converted via a script I wrote from my flacs. I do not believe my flacs have any art, I am not even sure you can store art in a flac tag and even them I don’t think the ogg encoder is transferring them. I ran a tag dump (ogginfo) against my oggs and do not see anything to do with album art. I had 4 files on the device with album art. They were all in a directory with a database.ignore file. So they should not have been noticed. Just in case I removed that directory and rebuilt. It went though 44k files, commited 1-9 and then went back to “scanning” but the disk activity had stopped. Upon reboot it asked me to init the db again.

This is not a patched build. I simply changed the config to include large drive support. This is an issue that needs to be looked at. Please check into it, I will be happy to test any ideas.

(sansa fuze)
for some games (such as pokemon)
when you walk around alot;
it is difficult because even the slightest movement of the wheel activates the pause screen;
I have tried multiple controls setups;
and whatever is setup to use the scrollwhell is always extremely sensitive;
a sensitivity setting should be added, to allow a change in the threshold required to count as a button press

This task is about the implementation of the MTP protocol for rockbox.

The code can be found in a github repository:
http://github.com/godeater/rockbox/tree/mtp The two main files are:
firmware/usbstack/usb_mtp.{c|h}
But there also are some other modification to be able to run it using the debug menu.

ROLO currently fails on these targets unless a Rockbox image is being loaded that is sufficiently similar to the one already in memory.

The sequence goes like this:

- rolo_load() loads the new image to
rolo_restart() copies the new image to the start of DRAM (to achieve this without crashing, this function is in
rolo_restart() tries to call invalidate_idcache(), but since invalidate_idcache() is in DRAM this fails as the function has been overwritten.

There are several solutions to this:

1) Move invalidate_idcache() into .icode (easy but won’t fix all targets, esp. those that don’t use IRAM)

2) Create a new .safecode section at the end of DRAM, and move these functions into it (lots of work to update every app.lds and crt0.S, and test every target)

3) Introduce target-specific rolo_restart() functions, as per imx31/rolo_restart.S (less work, as only one should be required per architecture, eg ARMv4/5 etc.)

I’m not sure which of those options is “best”. 1) is certainly the easiest, but 2) and 3) should also allow ROLO to work on targets that don’t use IRAM.

   I've update my ipod nano 2G to r23629. I found the clickweel would remember the last point my finger leave. And next when I touch the clickwheel, it will make a farward/backward move according to the last point I left, even click the button. Now it is not convenient to type a word with the keyboard inside or setting.
   And my Mac doesn't launch my ipod when I connect my ipod with USB until I change to disk mode. Seems that the USB driver doesn't work.

I noticed, that every time I’m in the car listening to music, and I disconnect the iPod 30G (5th gen), while its playing, and I then try to shut it down, it’ll jump to the main window and will not move away from it.

From this point on, I cannot turn off the device nor more away from the main window. Only a HR will resolve this and let the iPod come back to normal working order.

Further more, while it is in that situation (which it is right now, while I write this), the device won’t even go on sleep or turn off the monitor. So basically, it’ll stay with the screen wide awake and lit up.

The two only buttons that will work are the Hold button, which will in turn, turn off the screen and the scroll will allow me to scroll up and down and around on the main window.

Q: What sort of car connection do you use? Line-out+power, or MSC? Or the accessory
I’m not familiar with these connection and their types. All I know is that it is connected to the car stereo from back (ie. the stereo was pull out and the adapter was connected in the back). Also, that it is a connection that connects to the bottom of the iPod (ie. flat and wide connection). It gives me control from the car’s stereo and the steering wheel. When I bought it and then they hooked it up, they told me this is an iPod adapter.

This DOES NOT happen if first stop the music and go to another menu BEFORE I disconnect it from the adapter.

Build is r23841 and earlier.

Occasionally when I reboot to the iPod firmware, something has caused the previously unset alarm setting to be enabled and the playback mode is set to shuffle. This doesn't happen with every reboot, but does more than 50% of the time.

Steps to duplicate:

1. Disable the alarm and set the shuffle mode to "None" in the iPod firmware.
2. Reset and boot into Rockbox
3. Listen to a few tracks
4. Reboot into the iPod firmware and check the shuffle mode and alarm settings.

I can't confirm 100% yet as to the time on the alarm being reset as well, but it does seem to consistently read 6 AM - which is a bit of a shock if I've been listening in Rockbox during the day and then I reboot into the Apple firmware and dock in my iHome, expecting to sleep in late on the weekend.

Duplicate table and some text found in manual/main_menu/main.tex in section Recent Bookmarks, and in manual/configure_rockbox/bookbarking.tex in section Bookmarking.

These duplicate code sections should be joined, and the two files should share it.

Tested on r24190-100105

To reproduce:
- Start Rockbox, default setting
- Play a file with ID3 tags which are encoded in some non-Latin locale (In my case, Hebrew). Notice that the strings are shown in Gibberish.
- Change Default Codepage to the other locale (e.g. Hebrew).
- Go back to WPS

Expected result: All strings that are encoded in the other locale are shown properly.
Current result: All these strings are shown in the original locale.

Workaround: Restart the player. The new locale is applied.

I will not have time to fix this myself, so I'll appreciate if someone else can take responsibility for this bug. Thanks.

Can't load Rockbox from my SDHC 32 GB A-Data Turbo Class 6.
Get “ATA mount File not found”. Cowon FW loads well.

Sorry for this article. I am a Chiness boy and my english is poor.But i love rockbox.My MP3 Player is onda vx747.I can’t open any .txt files which larger than 1M on the rockbox system.I don’t know how to solve it and i hope some could send me a message if he could solve the problem.My E-mail:724279694@qq.com.Thanks!

Stereo width of >0% can cause stutter in the form of an audible click.

Bypassed by setting stereo width of 0% or monophonic channel configuration.

Sound in all games sounds like chirps or clicks that sounds kinda like the real music on the Nano2G.

As the title states the c200 v1 LCD doesn't turn on when changing the Backlight setting from Off to On. The backlight itself does turn on though. I don't know if this happens with the v2 players.

I first noticed this behavior in r24404 earlier today on my c240. I then updated the player to r24511-100204 and get the same behavior as before. I also get the same behavior in another c240 v1 player that I have which I also updated to r24511-100204. It was previously running r20698-090412 and the backlight didn't turn on when changing the backlight from off to on (I'm guessing that  FS#10130  fixed that problem) - so it happened sometime between that revision and at least as far back as r24404. It might have even carried over from  FS#10130 .

Also, just as a note, I don't notice this behavior in the February 2nd c200 simulator (r24449) - both the backlight and LCD turn on as expected. I checked my v1 Fuze (r24509) also and get normal behavior (backlight and LCD turn on), so this bug might just be limited to the c200 players.

I like to keep the equalizer on with the precut set to -24db, as a volume limiter. I also like the fade on stop/pause set on. When I pause there is a noticeable ‘click’ sound after the music fades out. Also a click before fading in when I resume.

This was not always the case, but I am not sure how old the version I was using, that did not do this.

By the way, this also occurs on the Gigabeat S, as well as Gigabeat F. I don’t know about other models.

Let me know if you need more information.

There is bug in rockblox: when you manage to push block exactly to the top of the field, game neither finishes with error, neither continues normally. this block starts growing when you destroy lines in the bottom.

I've made small video and put in into youtube (sorry for bad quality and sharpness :
http://www.youtube.com/watch?v=2gULp6yUms8

look into the left top and see what happens when lines are removed. bug is quite easy to reproduce. right side works like the left.

rockbox 3.5: ipod doesn’t recognize the connection of usb. i understand that rockbox doesn’t support usb on a 3G ipod, but it would be nice to boot into disk-mode like it does for firewire.

charging isn’t monitored on ipod 3G. it just goes up to 100% very quickly and stays there.

Currently with r24775-100219 on a Gigabeat 20
Checked that it isn’t something to do with the HDD
sometimes after USB transfer or just right after startup, after pressing “Resume playback” it just halts there,showing the album art and sometimes you can change songs/volume but it isn’t playing,then it just freezes and you cannot control anything that needs to be turned off via power switch, and sometimes it requires certain trials before it can normally startup and play.
Additionally, if that happens during startup, it is noticeable that a normal startup produces sort of a background noise,while a buggy startup is simply silent in my headphone.

Hi,

I think that the problem reported on  FS#10919  is still here, or at least not completely solved.
But now, I get the feeling that the pause only happens when the buffer refill is triggered via a track skip. During normal playback, it don't seem to happen any more.

The build I tried it on is r25249.

TIA

H120 not starting original IRiver Firmware with LCD Remote holding Rec + Play Button both on LCD-Remote.

sansa fuze v1 scroller doesn’t obey ‘first button press enables backlight only’

rockbox 3.5.1

This is a reopening of issue  FS#7354  (quoted below) related to playback problems involving cuesheet support and flac files (labelled #1 in the original post). Jumps to certain positions in flac file according to the cuesheet fail consistently.

The bug is extensivelly described in the original report and can be easily reproduced in current versions. I reproduced it in many situations with the following configuration:

Equipment used: Cowon D2 and Cowon D2 simulation
Rockbox version: tested on r25508-100407 and r24777-100219 (simulation)
Rockbox settings: Cuesheet support ON, other on default
FLAC files: Ripped form my original CDs with EAC (to WAV and cuesheet) in secure mode and processed with FLAC 1.12 and/or 1.14 compression level 8. MD5 checksums on cuesheets and FLACS checked. Cuesheet syntax OK, cuesheet file encoding UTF8-DOS and/or DOS. Works properly my on computer.

Quote of the original post

When Playing with rockboy on sansa e200 V1 , Rom that have a size of more than 1m Bug and Rockbox often shutdown. And even if these roms run, the speed isn't playable.

installed rockbox and doom (freedoom) all correctly. but problem is that the navigation keys dont work when the game starts. cant move. but i can bring up pause menu by flicking hold on then off but then only up(menu button) works in addition to the center button being able to select

to reproduce:install latest build for ipod classic 5th gen 30gb
install doom from the rockbox utilities program
run doom in ipod
game loads
face at bottom of screen moves, showing it isnt frozen… cannot move

and yes i have tried configuring the keys, it doesnt work

On Gogear sa9200, when hold is switched to off(means in the middle), the play stops.
Maybe because the hold and the on/off share the same swtich.

When the battery is nearly empty and the iriver H10 is about to shutdown, the volume sometimes suddenly increases progressively, as if the volume UP button was pressed and held down, all the way up to the maximum.

This has happened to me about 3-4 times so far. Pressing the volume DOWN button somewhat counters this bug, but only for as long as the DOWN button is used - the volume keeps increasing.

This occurs with Rockbox Release 3.5 (not 3.4 as the Report Version field of the ticket says).

A mixed RTL with LTR text appears in a missed order not conforming to bidi logical to visual algorithm of unicdoe.

Implementation is ready in bidi_l2v() , but the “orientation” parameter is hardcoded and passed as “1” always

A suggested solution is either pass “orientation” as 0 for any RTL text, or tie the orientation parameter with the “alignment” option of the text viewer.

Seen with r27199 on the e200 simulator.

If I place a .wps file in the root directory and “play” it from the file browser, the WPS is not loaded. I’d expect it to load but not to be saved as the setting.

The same file is loaded if it’s in the directory /.rockbox/wps, i.e. it’s not the wrong file contents that’s causing the error.

ONDA VX777
While in FM-Radio it isn’t possible to change the volume value, nor from the context menu, nor from the virtual 3×3 touch screen grid and nor from the .fms %T tag in absolute mode.

when the FM tuner is turned on and say that you want to go to Add a Preset you cannot hear thevoice over the radio. this should be controlled where the Fm volume is turned down and the volume of the voice is turned up just like in playing regular music.

A couple of config file options are missing from the manual appendix:

e.g.

backlight fade in: 2000
backlight fade out: 10000

The following set of WPS tags demonstrates:

# WPS Document
%wd
%V(0,0,-,10,2)%Vb(000000)%Vf(FFF000)
%aL%cH:%cM %ac%pv %aR%bt
%V(0,11,-,30,2)%Vb(000000)%Vf(FFF000)
%it

If you alternately insert and remove a space between the second occurence of %Vb/%Vf, the track title text appears and disappears. It appears to happen in a few other variations, but this is the shortest concrete example.

While playing doom, I can definitely read the amount of ammo, shield status, and health of my character. However, I cannot read the messages like you need the key first to open this door. Also, if you set the screen size to the maximum and turn on the heads up display the font there is also illegible.

sometimes when i click on next(or previous) button a couple of times , rockbox gets stuck and then anfter 3 or 4 secs ,it restarts .then when loaded the battery is empty.
i am not sure if this is a rockbox related issue or hardware realated cause i use my ipod for file transfer mainly .and this issue existed from version 3.3 till now( i cont know or remember about before that).

is there a way that i can somehow debug (trace) this issue?

Hi!

I’ve found very important bug in Rockbox 3.7, witch my be dangerous for both the player and the memory card (if present).
It turned out that Rockbox doesn’t react to very low battery level while voice or FM radio is recorded. It causes damage to the recorded file when finally hardware falls due to lack of energy. This corrupted file is absolutely unreadable.

I think I have experienced a bug in 3.7+ builds with WPS themes related to %Vf.
If you put the %Vf on a new line, the following text is displayed, then cleared, but only if its a scrolling line, if the first line is static it is displayed properly, and subsequent lines are also displayed properly even if they are scrolling

example:

%Vl(b,0,108,176,60,1)
%Vf(999999)
%s%ac%?Ia<%Ia|>
%s%ac%?It<%It|%Fn>

artist is displayed briefly then cleared, if you take out %s artist is displayed properly, if you put the %Vf on the same line with %vl artist is displayed properly with scrolling, if you put a static text line before the first %s line then all lines are displayed properly.

so my quick fix is to just move the %vf on the line with %vl, but this bug probalby breaks many WPS, also this worked before 3.7, not sure when it stopped working. Tested this bug with latest build:r28534-101108 and 3.7 release sansa e200 v1. (also with latest e200 simulator)

this bug was not in builds up to or prior to: r27944-100830

(./version.tex)) [2] [3]
1.

Class scrreprt Warning: \float@addtolists
You should use the features of package
instead of
Support for \float@addtolists may be removed
`scrreprt’ soon .

This is the warning text I get. We should probably update the syntax before it get broken.

URGENT/HIGH PRIORITY: Rockbox Firmware 3.7 installed with iRiver H300 1.29J.

Charging when in Rockbox mode (player switched on):

When Rockbox is running and the charger is plugged in, Rockbox can be seen charging the battery in the top left hand corner. When it is fully charged, it shows a full battery.

Charging when iRiver is powered off (player switched off):

When the charger is plugged in, the iRiver begins charging in Original Firmware mode. This is okay as the player charges correctly until Complete.

Booting into OF mode, shows a full battery charge so I can be sure it is fully charged.

However, boot back into Rockbox mode and Rockbox seems to be misreporting the battery charge as depleted - I say misreporting because at this point I know it is actually full/complete. (Booting back into OF mode would also confirm again at this point that there is indeed a full battery charge).

But run Rockbox 3.7 and after a few minutes, a false message - "Low Battery - Shutting Down" appears, after which Rockbox powers off.

I know this is inccorect, because if the battery was so low in OF, the iRiver OF would not even allow you to attempt to power back on (instead it would display a "Low Battery" picture on the display), but I can boot back into OF mode easily with no problems even after this message from Rockbox, again the OF shows a full battery and I can run it for hours with no problem so I know somewhere here there must be a miscommunication/misreading from the battery charge to the Rockbox 3.7 firmware.

Have tested this a number of times to ensure it is a fault and yes it presents itself everytime.