Rockbox

build: r31372-111219

i am using SYLT and USLT tags in my audio files (LYRICS and UNSYNCED LYRICS respectively)

but it seems like lrcplayer does not read the SYLT tag.
it only displays someting if the UNSYNCED LYRICS tag is present

Hi all!
After 3.10 update I usually get my player frozen with usb plug icon if I connect it to any USB host while the player is off.
Steps to reproduce the issue:
1. Power off the iPod.
2. Plug it to Usb host. (tested with mac and Android)
3. Wait the system to boot.
4. It freezes with usb connect icon (no menu bar). Only holding Menu+Select help.

Thanks. Great firmware!

Since the daily builds in between 3.9.1 and now and also on the release 3.10 i experienced a problem with MPEG player not displaying the the fonts right and the chip8 emulator just freezes after loading a file i tested it with a few game files found on the plugin wiki.

USB is broken on mr500. I’ve tried r31467, but this has been the case since at least a few weeks ago.

Enabling logf in the relevant places causes rockbox not to boot, so wasn’t helpful.

All i know is that this happened on 590mb tta file and after cutting it with cue splitter there was no problems with playback.

SVN:31187

Languages like Thai use combining diacritical marks which display above or below the adjoining character. When text scrolls off the screen, the text jerks back and re-scrolls what seems to be the width of the diacritical mark. It seems that the scrolling algorithm is counting the width of the diacritical mark, where it should be ignored.

How I am able to reproduce this behaviour on my clipv2 using rockbox 3.10:

I select a file to play using the file browser and rockbox creates a curent playlist.
I save this playlist using the context menu and enter file browser again.
I select a file from any other folder for playing back, I get a “playlist buffer full” error message, that keeps flickering on the screen, when pressing any button.

I increased all file limits and also deleted the .playlists_control file to have it recreated again. The saved playlist consists of 30-40 mp3s.

since build 31646 text viewer stops bookmarking or saving the last position on any file it shows bookmark added when i press the center+down buttons but doesn’t actaully save it.
seems to have a problem writing to the file tv_file.dat.

I have a Sansa Clip+, Clip Zip and Fuze V2 all running various RB versions. The crash happens on all of them.

To focus I will use the Clip Zip (as its close at hand) and tell you what it does.
I get:

Prefetch abort
at 9D8DE9B4
FSR 0x11
(domain 1, fault

on a white background screen

This happens when trying to use the lrc plugin on the clip zip running RB version 4.0 (r31646-120109) and accessing a sandisk 16gb sd card that is 12.5gb full.
But i can confirm i get this message (or a similar one) on my fuze v2 and clip+ which are running 'stable' albeit older versions of rockbox (again from sd cards). I mention the sd cards but im 90% sure it happens on songs on the internal memory also.

I suspect it has something to do with my mp3 files having lyrics embedded within them but not as .lrc files. All i can explain is this:
I use wiki lyrics to find lyrics for songs and then right click copy them and use Tag&Rename and Paste into the mp3 file and save.

Using this method works fine for displaying lyrics when using ipad2's stock music player (pre iOS5) and androids app Poweramp for Samsung galaxy S2 phones and Creatives Ziio 7 tablet (running poweramp). This method also works for my Pc when running foobar and using the 'TextDisplay' component. The Text Display Format in foobar settings are $if2(%unsynced lyrics%,No lyrics available)

It should be noted that when using poweramp and choosing 'Lyrics' it asks where u want to choose to read the lyrics from:
-Auto (from tags if available, otherwise via musixmatch plugin)
-Musixmatch plugin
-From tags

I select the last option (from tags) always and it never fails. ipads player seems to also use this method. The lyrics do not scroll automatically, u need to scroll up and down to read them (should they be longer than the visible screen).

Occasionally lrc plugin wont crash if it actually finds a lrc file embedded in song and works fine. But this rarely happens, perhaps only 10% of my collection has lrc files embedded within them, soon as it goes to next track without one it produces this error.

I just did it again for a different file and a different error.

Prefetch abort
at A0A0EE94
FSR 0x11
(domain 1, fault

and so on so forth.

There is different level audio between Radio and Music Playback with the same db value. Level audio on Music Playback is too low.

Hello.

Can you somebody add some info about using talkclip for shortcuts.txt
in manual section 5.14 Shortcuts.

I'd recommend replace this

 "talkclip: <filename clip of a talk that speak When voice menus are enabled>"

for this

"talkclip: <filename clip with full path of a talk that speak When voice menus are enabled
 (example /.rockbox/filename.talk)>"

I suggest this because I took a long time before I figured out how it should be properly.

When playing a sequence of two songs Rockbox on my HTC Desire S always crashes. I first had r30576-110921, and now it is r31516-120102. Cropped versions of the songs can be downloaded here:

http://www.vlado-do.de/rockbox/01_Wenn_die_Nacht_am_tiefsten_03m_08s_09h__03m_23s_22h.ogg http://www.vlado-do.de/rockbox/02_Wir_m%C3%BCssen_hier_raus_00m_00s__00m_28s_82h.ogg

They still reproducably crash my Rockbox. I found a workaround, though: mp3 versions of the same songs play all right. Rockbox for me still is the only known way to have gapless playback on my phone. Thanks for that guys!

Buy the way: the same ogg files made no problem in Rockbox on my old iPod nano.

Hello!
Not very long ago I got iPod Nano 2 gen 8gb, installed rockbox and encountered this strange behavior:

After pushing and releasing Hold button player doesn't react on wheel. When I'm trying to use some other button(Menu, for example), nothing happens. After third attempt to use a button Rockbox does button context properly, showing me what I wanted to see a few clicks ago. What happens with interface after using Hold? When I return to 'Now playing' screen throughout Menu, all works fine. But right after using Hold button I can't nor increase/decrease volume, neither move in a menu list.

There are some problems with the quickscreen on the Sansa Fuze. I traced it back to r31246, a text alignment bugfix:

- Quickscreen items flicker a lot and sometimes vanish for half a second on each change of an option.

- Setting the right option (Repeat) to "Shuffle" and then back to something else causes "Shuffle" to stick on screen. Leaving the quickscreen and returning to it reveals the correct setting.

This only happens for longer scrolling strings of text, e.g. "Shuffle" is "Zufallswiedergabe" in German.

as3525
Version: 91b52a1-120122

Running on Sansa clip zip, unable to play the following .ogg file (I can't try it on other Rockbox versions, maybe someone can?). Works fine played any other way.

www.quik.clara.co.uk/Wontplay_inrockbox.ogg

(too large to attach directly)

H140; R-box v3.10 and current.
codec; libFlac v1.1.0. 20030126
Embedded cue sheet; No.

When playing my only FLAC album (6 tracks), I can reproduce the following condition at will,
The player hangs in the last track, player does not respond to buttons and only a hard reset will fix it.

I can consistently reproduce the above bug as follows,

I start track 1 and let it play for a few sec's, then FF to 5 sec's before the end of track 1,
let it play the remaining 5 sec's of track 1 and let it change into track 2,
Play a few sec's of track 2, then FF to 5 sec's before the end of track 2, let it change into track 3,
Play a few sec's of track 3, then FF to 5 seconds before the end of track 3, let it play etc… ( I repeat the above until I'm in the last track),
when it has changed into the last track, FF to 5 sec's before the end of the last track and let it play, when play time reaches 1~0 sec's before the end of the last track, the player hangs in that last track with the disk activity light on continuously, player does not respond to buttons and only a hard reset will fix it.

When booting rombox or rockbox from flash on h1x0 with dircache enabled, chances are good that the thing will freeze. This started with r30393 / 7e14b935dfdcd808cfb0703d19a43efd11eeef16.

This still happens with d2f97da668836f5d825c9aaef0d58dea64fc4dd5

I'm using Rockbox 3.10 with the 01.02.16 Clip+ Firmware on a Sansa Clip+ 8GB, installed via the installer.

There are a lot of 44kHz/16bit FLAC files stored on the device. During playback it could happen that the next track starts while the current one isn't even close to finished. This can be in the first few seconds or in the middle of the song.

This usually doesn't happen to the same song twice. It's generally a different song each time. When skipping back to the track that was skipped, it usually plays without any problems.

The memory has been checked with CHKDSK and no errors were found. The FLACs play fine in foobar2000 and I'm certain that they are okay.

I do believe the error occurs most often after roughly quarter to half an hour of playback.

This may be related to FS#12208

When turning on my Sansa with Rockbox 3.10, the display sometimes goes all white and stays that way until the screensaver kicks in. The player works fine during that time and can be controlled blindly. After the screen turns off and I turn it on again, the screen works as expected. This does not happen all the time, but very often.

All settings should be listed there (even more so settings which cannot be set through the UI), but root menu order is only described in advanced_topic/main.tex as of now.

Hi, firstly i put Sansa c200 because SansaClip+ is not available in the list.
My player is a Sandisk SansaClip+ bought 6 months ago with an 8Gb class 4 Sandisk microsd (that is currently empty, no songs stored).

Steps to reproduce the issue (after a fresh installation of the Firmware, no settings changed):

1) Switch on
2) → database
3) → track
4) select any track
5) press the central button
6) Erase Dynamic Playlist? is displayed.. Select Yes
7) countdown then starts to play
8) Seek to the next song (it happens at the first seek or might need three, four one after the other)

Data abort
at 30813E44
FSR 0x8
(domani 0, fault 8)
address 0x62E90028

- I installed version 3.10 on top of version 3.09, but later on I tried to uninstall completely 3.10 and reinstall it from scratch and the issue is the same.

- After the crash i have to keep the "switchoff" button pressed for a while.. then I press it again to restart the player and I try to resume the song I get "playlist control file is invalid" or "nothing to resume"

- behavior is the same with or without the SD card

- The issue was randomly happening (but very very rarely) also on the previous version of the firmware (3.09) I got the error a couple of times in 6 months.

Using the %pL Tag (in WPS) in order to simply display it or use it in a conditional tag (like in the “analog” theme yields very high values (let call it spikes) - where they should not be, while the bar-type peak meter is working fine.

Within the simulator, everithing is running smooth, as far as I could see.

I tried to have a look at the sources but that’s too much at the moment.

Does somebody have a clue ?

Regards

  Ralf

When I skip backwards 3 songs, Rockbox aborts with the following dump:

Data abort at 60077EB8
FSR 0x1
(domain 0, fault 1)
address 0x00000005

It happens always, playing or in pause. At the 3rd song dumps.

RB version: 04cd1fd-120320

Regards!

Sorry, not sure in which build part of this ceased to function, but I think it was just prior to 3.10

In the Clip Sim's I can no longer access the Lock Screen. "H" used to do this for me, as I recall.

Also, the charge values in the Clip Sim's no longer incrementally increase and decrease. The charge values used to go from 0 to 100 and then back down again.

This applies to the Clip Zip Sim as well. I haven't tried the Fuze Sim.

Thanks.

When you configure Shortcuts to replace the Quick Screen then there is this unwanted behaviour:
Exiting the Shortcuts menu always returns to the Main Menu, not to the screen from which the Shortcuts menu was invoked by pressing the Quick Screen key combination.

Tested on: Sansa Clip+
Builds tested: latest daily - b7bc240-120409

			latest current -	2406005-120410

I'm using a Sansa Clip Zip, which hasn't been added to the Player Type list. I've noticed that several MIDI files crash the player, reporting OUT OF MEMORY and MALLOC BARF errors. This is more likely to happen with MIDI files with many instruments, such as orchestral pieces. One example is a MIDI file for Debussy's La Mer. It tries to load all instruments into memory before playing and will crash without playing anything. I don't know if this can be fixed with better memory management or if my player just has too little RAM.

So, I have a Clip Zip at the moment. Been using rockbox on it since day 1, and since day one i've always had an issue: during playback, when accessing files from the SD card, the player randomly freezes. It's not always, it's not when accessing the same files or some specific characteristic shared by them, it just appears to be random. When it freezes, the LCD usually still responds to my commands (i can access menus, see the file info, even change song and it will display in the playback screen), but the actual playback doesn't, and I eventually have to hard reset it. I guess it's some kind of SD compatibility issues: I have an 8GB class 4 PNY. I know it's not the own card's problem since it worked perfectly on my Clip+ and does on my Android Cellphone.
I've been updating daily builds for this device at least once a week since I got it, and it happens with every build.

After updating Rockbox from 3.10 to 3.11.2 on my Ipod Nano 1g i noticed the robotfindskitten game did not work as it should anymore. When robot has touched the first object, the text on the top does not change anymore when touching more objects until he finds kitten. The kitten animation also is hidden behind the text of the first object and the scrolling of the text starts at the end, not at the beginning.
I think it worked fine in 3.10, or at least in 3.9.

Please investigate this problem.
Thanks,
Hugo

Not sure how long this chronic bug has gone on but at least before the dubious move to git from subversion. I have had trouble on my V2s with freezing (appears like they are loading in the middle of a song but nothing is happening and you can't do anything) while playing and recently freezing when adding tracks to a playlist. I can take the microSD/transflash card out and stick it into a V1 Fuze and there is no problem, it will play forever and never crash. The V2s will crash minutes after playing, sometimes a track will finish, sometimes the same track will get stuck, one time it happened less than a second after beginning to play. No white screen of death, just a soft freeze and a blinking loading indicator. If you fiddle with it it will stop blinking and become utterly unresponsive. Have tried formatting cards, etc. V1 players work fine, V2 players are now junk under this firmware.

I don't know exactly how long this problem has been going on but it has been getting worse. Before the 30,000th SVN release, perhaps somewhere around 28000, I would be getting crashes occasionally with the V2s but nothing like this. My v2 players will unconditionally crash now after a short time. Rockbox is unusable for me on my V2 Fuze players. A lot of digging may be necessary to get to the bottom of this problem because I think it is buried under a lot of newer modifications.

I will not submit any sample music files (I know you guys always ask), this is problem exclusive to AMSv2 and I am sure by now that some Rockbox developers are aware of some issues that could be attributed to this sort of problem.

In Rockbox for Android it is not possible to highlight an entry in a list without selecting (entering) it.

For example, if I am in the playlist viewer showing the list of just playing songs with my ipod (running rockbox) I was able to scroll through the list which moved the higligting bar through the list and then I could select the desired entry by pressing enter. With the touchscreen I found no way only to highlight a certain entry.

This is important if all entries are very long and have the same starting text. For example "Ludwig von Beethoven, Symphony No. 9 - 1. Adagio" cannot be distinguished from "Ludwig von Beethoven, Symphony No. 9 - 2. Andante" in the playlist viewer since the distinguishing part is cut off. With my ipod I could highlight the entries with the scroll wheel and the highlighted line started horizontally scrolling so I could see the complete text. With the Android port I can only touch the line, but touching the line does not only highlight it but also selects it and so starts playing.

This problem also exists in other list with long entries and happens with all version I compiled until now (latest was a12b2a5).

The settings submenu with the playlist viewer settings like “show icons”, “show indices” and “track display” to select between file name only and full path for playlist entries is not available in the playlist viewer menu in the Android version.

So these settings cannot be changed.

This happens in all version I tried until now (latest was a12b2a5).

I have a Sansa e260 player and currently Rockbox 3.11.2 running on it.
I got a shuffled playlist with all of my music in it (added to the playlist using the insert function and reshuffled afterwards). When I want to listen to one or more specific songs, I enqueue them with the queue function (in play mode select song, album etc. from database → context menu → Current playlist → Queue).
This works fine in most cases but when there had already been a queue that ended the song before, the song that I want to enqueue is placed before the currently playing song (which is the first song not any more part of the former queue) instead of after it.
If I use the feature "Queue next" the song, album or whatever is correctly placed after the currently playing song. After having used "Queue next" once, other songs enqueued with the "Queue" command may be also placed correctly at the end of the new queue. I believe to remember some strange behavior though when in that case the song was also incorrectly placed as described above.
I tried mp3 and ogg files and the behavior was the same regardless of which file format was used. It also doesn't matter if the song is played from the player's memory or from micro SD card.
As soon as the second song after the queue is playing, enqueued content is correctly placed after the currently playing song again.
I have experienced this behavior for a long time now and with different Rockbox builds on my player.

To reproduce the behavior:
1. Have a reshuffled playlist (created using "Insert" command, then selecting "Playlist" → "Reshuffle" from the wps context menu) with some songs in it
2. Listen to one of these songs which is not the first or last one in the playlist
3. Enqueue a song from your database via the context menu (This song should be placed directly after the currently playing one)
4. Play the enqueued song (or a part of it)
5. Play the next song in playlist
6. Now enqueue another song (This song should now be placed directly before the currently playing song in the playlist)

I have hardly any programming experience at all but it seems to me that somehow there exists some sort of marker that indicates the end of a queue and that this marker is not erased immediately after a queue ends but "one song too late"?

Current developer build (2012-06-10), on Sansa Clip Zip
While audio is playing, connecting USB and disconnecting it again causes a splash with message “Error accessing playlist control file”. Sometimes followed by a hard crash (like undefined instruction).

Initial analysis shows that the problem occurs in playlist.c:get_filename. An lseek in the playlist control file fails. This lseek fails because the file descriptor (fd) was closed during USB connection. On receiving a SYS_USB_CONNECTED event in apps/misc.c, function system_flush() calls playlist_shutdown().
So the playlist subsystem seems to have been de-initialised during USB connect, but not completely, causing problems when the playlist subsystem resumes during USB disconnect.

This is reproducible on the simulator.

The version 3.10 is stable and everything works fine, but since I upgraded to the last version 3.11 or the daily build the ipod crashes and I can't mount the device in the computer, the charging doesn't work either.

Player Type = Sansa Clip+ (not available in chooser when submitting).
Release = 3.11.2

Recording at 48kHz results in audio that is 2.35% too fast. I believe it is recording at 49155Hz instead of 48000Hz. Recording at 44.1 kHz does not have this problem.

I have verified by putting 2 identical Clip+ in front of me, one set to rec at 44.1 other at 48.0. When playing back audio (on PC) difference in pitch is (barely) audible. And the audio falls out of sync as recording progresses (in video editor).

For now I’ll be happy to only record at 44.1kHz, but maybe 48kHz recording should either be fixed or dropped from Clip+ options.

Rockbox crashes when stopping playback of ogg vorbis files. This happens both, when I stop playback through long pressing the play button or simply if the last track in the current playlist is finished. It does not happen when stopping playback of mp3 files. Pausing does not cause a crash, only stopping does.

I reported this problem already in  FS#12669  which was closed since it was asserted to be fixed, but it wasn't and isn't fixed for me.

The bug occured in version 688302a of 04/08 13:15. All earlier versions (tested back to bb0e4cc of 04/05) are working and later versions are crashing. I just tested current version e5d6e42 and Rockbox still crashes.

I have a Samsung Galaxy S running Android 2.3.7 (CyanogenMod CM7.2.0)

I'm running Rockbox 3.11.2 on a Sansa Clip+.
I followed these steps:
- go to the Main Menu
- Files
- long press on <microSD1>
- Playlist Catalogue
- Add to New Playlist
I tried to save the playlist with a long press of the select button (not sure of the button's actual name; it is the button in the middle of the 4-way controller and the one that is usually used to select the highlighted option). I was returned to the Files menu. The playlist did not get saved, and there was no error explaining why.

As a result, I spent a long time assuming that long press of select was a "cancel" action, and tried short and long presses of every other button trying to save the playlist.

Workaround: instead of accepting the suggested filename, remove the "<" and ">" characters from the auto-entered filename ("/Playlists/<microSD1>.m3u8") to be able to save the playlist.

Suggested fixes: The filename suggested by Rockbox should not include "<", ">", or other un-saveable characters. In addition, if the user tries to save a file with invalid characters, a warning or error message should be posted (like the "Cancelled" message that briefly pops up when the power button is pressed to exit from the set-filename screen).

I’ve been using the latest dev builds everyday for iPod Nano 2G and still encountering “Swapped Channels” on Playback (e.g. Left Channel → Right Headphone / Right Channel → Left Headphone).

Used latest build 5785cfb-120625

Settings such as "eq enabled" and "replaygain type" do not apply to a playing track when selected from shortcut menu, although the setting does appear to have changed when checking in the settings menu. The audio remains unchanged when changing the settings. However, when changing the same settings via the settings menu they function correctly (e.g. audio noticeably changes from loud to quiet after a few seconds).

Also, while displaying "debug info" on the wps, I noticed that %rg (replaygain value in dB) DOES change when the replaygain is changed via the shortcut menu, even though the audio doesn't change. (Both %rg and the audio change when the same setting is changed via the settings menu).

NB Some settings DO work, such as bass and treble.

Problem noticed on Sansa Clip Zip (build 2f1da04-120627), UiSimulator of Sansa Clip Zip (build fa17cb9M-120627).

Experienced Results:
I have 2 folders(lets call them FolderA and FolderB) each containing audio files.
FolderA and FolderB are both on the root of my drive
Neither one has a database.ignore file in it.
I go to settings → general settings → database → update now
All files are added to the database as expected
…But i realize i dont want FolderB to show up in the database.
I add a database.ignore file at /FolderB/database.ignore
Then I go back in and update the database again(settings → general settings → database → update now)
all of my audio files still show up in the database(including the ones in FolderB with the database.ignore file)

Expected Results:
After adding the database.ignore file to FolderB and updating the database(settings → general settings → database → update now) the audio files in FolderB should no longer appear in the database

Summery:
Any files in a folder containing a database.ignore file should be removed from the database on update

Rockbox Info:
Build Version: daily / e3cddc2-120701

Daily build: c413591-120705 and earlies.
When I connect powered down my Fuze V1 and disconnect from USB, it hangs displaying USB screen. I must hold power switch for several seconds to power off player. Tested on two different machines with windows7 x64. When I connect powered on player everything works perfectly.

I upgraded my Sansa Fuze V1 (AMSV1) from the current stable release 3.11.2 to Daily build (ad46064-120710). With Rockbox powered on, any attempt to connect USB to my WinXP fails. The USB icon is displayed briefly, followed immediately by the white screen - Undefined Instruction at 0000003C. This is repeatable. Recovery is via a power down.

Note: the USB connection works fine with the current stable release 3.11.2 and this is the first daily build I have tried,

When playing FLAC audio tracks, they are no longer playing gapless. There seems to be about a half second gap between tracks.

iPod Video 5G
Rockbox 3.11.2 / r21506
Bootloader 2010-05-25T22:02:55

Issue is present even when using default theme and font; Docked or not docked.

I tried increasing the buffer and that had no affect.

If you add a tank or a plane on a field the strenght does not increase at any time ( as expected ). E.g. place a tank on a field with a farm.

The Bug is located in superdom.c in lines 438 - 457

static int calc_strength(int colour, int x, int y) {

  int a, b, score=0;
  for (a = -1; a < 2; a++) {
      for (b = -1; b < 2; b++) {
          if ((b == 0 || a == 0) &&
              (board[x + a][y + b].colour == colour)) {
              score += 10;
              if(board[x + a][y + b].tank || board[x + a][y + b].farm) // <-- this is the BUG
                  score += 30;
              if(board[x + a][y + b].plane || board[x + a][y + b].ind) // <-- this is the BUG
                  score += 40;
              if(board[x + a][y + b].nuke)
                  score += 20;
              if(board[x + a][y + b].men)
                  score += (board[x + a][y + b].men*133/1000);
          }
      }
  }
  return score;

}

The Bug should be fixed by using this lines instead :

static int calc_strength(int colour, int x, int y) {

  int a, b, score=0;
  for (a = -1; a < 2; a++) {
      for (b = -1; b < 2; b++) {
          if ((b == 0 || a == 0) &&
              (board[x + a][y + b].colour == colour)) {
              score += 10;
              if(board[x + a][y + b].tank)
                  score += 30;
              if(board[x + a][y + b].farm)
                  score += 30;
              if(board[x + a][y + b].plane)
                  score += 40;
              if(board[x + a][y + b].ind)
                  score += 40;
              if(board[x + a][y + b].nuke)
                  score += 20;
              if(board[x + a][y + b].men)
                  score += (board[x + a][y + b].men*133/1000);
          }
      }
  }
  return score;

}

When trying to start RockDoom on the iPod Classic, Doom appears to load normally until the iPod crashes and says "Prefetch abort at 71D0BF24 FSR (domain 0, fault 5)". Build ver. 8abdd9b-120902

On my newly purchased (but used) Archos Internet Tablet 70 250GB with Android Version 2.2.? (Froyo) I installed the daily build of rasher. Everything works so far, but playback of MP3 (mostly 160 Kbit CBR and ~200 Kbit VBR) pauses briefly every 2 to 3 minutes. I just reformatted the drive, which now has ext3 and that seems to end the pause which I got on FAT32 after ~4 Seconds of every new song, but every 3 minutes or so the playbacks stops for about a second - very annoying. Don't tried other codecs as I don't own any files other than MP3.
I was in the developers menu during one of this pauses, looking at the list of the contributors. The old names fly away to the right, but this was frozen also during this one second timespan - as if the rockbox-process was paused entirely or so.

So far there's still two problem which have never been fixed on Android:
1.When opening Rockbox, its volume bump to max automatically whatever it was when last quit;
2.On most HTC(and probably other) devices one can't use physical volume keys to adjust. Volume bars in WPS and SBS work well however.

Hopes the fixes!

  Nowadays there're more and more Android devices hit the market with higher and higher definetion. Therefore, we need to compile Rockbox with higher definetion.
  Though we can compile and run Rockbox fluently, it doesn't always work as we expected. Sometimes it can't load background image/WPS/SBS or it'll even stop singing. I did a lot of test and comparison between builds with different version and  definition and find out that it's the lacking of buffer which disturbs Rockbox working normally.
  Big tracks, images and WPSs/SBSs and maybe other can cause the buffer lacking. We have bigger and bigger RAM for apps now but Rockbox always can't get enough buffer to hold the data. Hope fix!

I have some stereo files that need to be encoded as two independent channels with no lossy stereo coupling. I encode these files by passing "–uncoupled" to the Opus encoder, e.g.

opusenc –bitrate 64 –framesize 60 –uncoupled example.wav example.opus

The lossless flac version of a sample of such a file prior to encoding can be downloaded from
http://kyle.tk/binaural-beat-sample.flac

If I do not pass the "–uncoupled" option to the encoder, the resulting Opus file plays with no trouble on my Sansa Clip+. The sample of this encoding is at
http://kyle.tk/binaural-beat-sample-64k.opus However, if I pass the "–uncoupled" option, sample at
http://kyle.tk/binaural-beat-sample-64k-uncoupled.opus Rockbox only plays a cacophony of chirps, scratches, squeaks and garbled noise, and no hint of the original sound is detectable.

Note: I have only been able to test this on a Clip+, as I own no other Rockbox player that is capable of playing Opus files at this time. Hopefully someone can confirm this problem on other targets, but for now, I have been able to reproduce it 100% on the Clip+, and I can confidently point to "–uncoupled" as the encoder option that results in an unplayable file.

Sansa Clip Zip has big problems with Lossless files. BIG.

1) Flacs skips randomly, at every encoding level (5 or 8 it's the same) and it's impossible to reproduce this issue when I want. It skips to the next track randomly
2) Ape files stops to reproducing and makes a really big noise, this after 30 sec. or 3 min… or nothing at all.
3) Wavpack files, sometimes, stucks for 0.5 seconds and then, it continues to play. It happens to Fast encoding, or Normal encoding, it's the same.
4) AAC files make little noises and, sometimes, crash Rockbox.

Flac and APE problems, I'm sure, occurs from ages, I bought Clip Zip months ago and these problem occurred for every build and ofr every Rockbox release.

I don't think that my player's broken. These problems were previously posted by other people.

I think that the testing of builds were made too hastily, there are too many problems with lossless files. I can understand APE that requires an expensive decoding, but FLAC files couldn't have these problems :(